Can I use 640g HD with my 3000 G430?

My HD just died and I wanna replace it with WD640g HD.  Can anyone confirm me if I can replace my old one(WD 250g) with WD 640g HD?  Thank you very much

Sure - why not?  As long as the width of the 2.5 inch drive will fit in your bay I see no reason why not.  Sometimes these drives are a little wider as they get bigger.  Just make sure it will fit the bay in your laptop.  You can always check the specs of the drive manufacturer and see if it is the same width as your 250gb drive.  If it is wider - you might want to check with Lenovo support just to make sure it will fit. 

Similar Messages

  • Can T420 use 3 display with out a dock.

    Can T420 use 3 displays with out a dock.
    One on a laptop display, one via VGA port and another one via DISPLAY port.
    I use T420  4178-BYT with Intel HD Graphic 3000 (no nvidia).

    You have to re-activate it with the original sim card, or one from the same carrier it's locked to (unless it's not locked, then any GSM sim card will do).  The sim card itself doesn't have to be activated, it just has to be the correct one and be inserted.  After that you can use it as an iPod Touch.  See http://support.apple.com/kb/HT3406.

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • HT202213 can i use home sharing with my wife who has a different apple id

    Can I use home sharing with my wife who has a different apple id so we dont buy the same songs twice

    Wow, great question mhaney73.  There's got to be a way.  I have that problem as well, double songs all over the place. 

  • HT4363 Can I use home sharing with FaceTime?

    Can I use home sharing with FaceTime

    Winston,
    Thanks for the promt reply. But my problem was that I did not know how to use the air play. I looked around and figured it out.
    thanks,

  • Can I use my macbook with a mac mini

    can I use my macbook with a mac mini

    You mean can you network the two Macs?
    What OS X version are you running on both of your Macs?

  • How can i use "icloud backup" with ios 4.2.1?

    How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

    You cannot.
    It requires ios 5.
    Your iphone can only go to 4.2.1

  • I just downloaded ios7 now i can only use the phone with the speaker, how can i fix this?

    I just downloaded ios7 now i can only use the phone with speaker, how can i fix this?

    x

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

    I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

    First, you cannot do this if you have a Boot Camp partition.
    Second: Create a new partition.
    1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
    2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed.  (Note: You can only make a partition smaller in order to create new free space.)
    4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
    You should now have a new volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.
    Third: Install Snow Leopard.
    Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
    Booting From An OS X Installer Disc
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple logo
          appears.
      5. Wait for installer to finish loading.

  • Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

    Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

    Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

  • I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    I just purchased a 3TB Time Capsule.  I live in Italy and have 220V power.  The Time Capsule is rated for that, but the cord says 125V.  Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?

    Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
    But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. 

  • How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

    Hi!
    I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
    Then I import it into OSB and make it work and the service works normally in the single node.
    But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
    So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
    Thank you!

    Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

Maybe you are looking for

  • I have installed acrobat on my computer and when I try to read a PDF fille it is jumbled and I can't read the file

    I can'tead PDF files when I try to I get jumbled lettrs only

  • Sharing a SharePoint synchronized libary accross a LAN

    Hello there I have a question I need to clear up regarding a SharePoint online subscription. For security reasons we don't wish to allow syncing of document libraries on users laptops for use away from the office. If I download OneDrive for Business

  • Java.io.File and "My documents"

    hi, In windows "My documents" is a shortcut to "c:\documents d settings\username\My Documents". Lets say that I ask the user to enter a filename with its path. When got it, i would do File file = new File(filename); but filename could be : "c:\data"

  • Trade advance in SAP

    Dear All, I have mentioned their exact requirement please note below and suggest me , would be thankful to you... As per Client: We receive trade advance from e.g 133000 (customer who is also vendor here) and every month part of the advance received

  • Loading transparent background gif on an image

    Hello everyone! I am trying to load a transparent background gif([http://www.aoml.noaa.gov/hrd/tcfaq/graphics/animehurr.gif]) on another image (which is a map). My way is adding two JPanels, each of them will load an image as an ImageIcon, however, t