Can I use a 2nd Airport Express to bring internet to a wired-only desktop?

Hi.
I have an Airport Express that's working flawlessly as a wireless router via a cable modem. Problem is, I have a second computer ( a desktop PC) that's too far away from the cable modem to hook it up via the ethernet. Is it possible to use a second Airport Express to extend the wireless network and thereby connect to my desktop with the ethernet cord? I guess this would be kind of using the AE backwards. If this is possible, could you please tell me how I might do it?
Thanks so much!

Here are the basic steps in setting up a WDS:
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (not the Ethernet ID) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.
I suggest that you also perform a "factory default" reset on each of your AXs to get them to their original "out-of-the-box" configuration.
Finally, for this WDS, AX#1 (the AX connected to the Internet modem) will be the main base station, and AX#2 will be the remote base station.)
Main Base Station Setup - AX#1
o On your MacBook Pro (MBP) click the AirPort status menu in the menu bar and choose the wireless network created by AX#1.
o Open AirPort Utility (located in the /Applications/Utilities folder).
o Select AX#1, and then, choose Manual Setup from the Base Station menu.
o Click Wireless in the toolbar, and then, choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS, and then, choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox.
o Click the Add "+" button, and then, enter the AirPort ID of AX#2.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AX#2
o On the MBP click the AirPort status menu in the menu bar, and then, choose the wireless network created by AX#2.
o Open AirPort Utility if not already running.
o Select AX#2, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS, and then, choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of AX#1.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Similar Messages

  • Can I use a 2nd Airport Express to extend signal?

    I have the AirPort Express 2nd gen.  I play music via my iPhone & iPad when I am "in range" with the AirPort Express thru my home music system.
    If I go outside, my iPhone drops the signal and music stops.  My iPad on the other hand has a stronger signal and the music plays on in the same location.
    Can I purchase a 2nd AirPort Express and use it as a wifi extender or range extender to increase the distance of my wifi signal?
    Or, can I use any wifi router to accomplish this?
    I'd like to stay all Apple, if possible, as mixing Apples and Oranges is not good.
    If so, can someone please tell me how to set this up?
    Thank you all for your valuable assistance.
    SmokinTulip

    The AirPort Express 2008 "extender" is about 80 feet away from the AirPort Express 2012 (new) model.  Is this too far to get a good signal?
    Wireless performance is affected by "interference".  If you have a clear, line-of-sight path between the AirPort devices, then 80 feet may not be too great of a distance.
    But, if there are walls or ceilings or other obstructions in the signal path that "interfere" with the wireless signal, the distance that the signal can travel and maintain decent signal strength and speed is dramatically affected.
    On average, a typical wall (sheetrock and 2 by 4s) in a home will absorb anywhere from 10-20% of the signal.  As you might imagine, a ceiling will absorb even more of the signal since it is thicker and more dense than a wall.
    Heavy furniture, large mirrors (a mirror has a metal backing) will really slow down and absorb the wireless signal as well.
    If the wireless signal must pass through multiple walls, or a ceiling and a few walls, not much of the signal will get through.....even if the distance might be only 20-30 feet between the AirPort devices.

  • Can I use a second Airport Express on the 1st floor to boost the signal from the 2nd floor Airport Express?

    We have a wiFi network with on Airport Express on the upper floor. Watching NetFlix via AppleTV on the television downstairs is annoying since it stops to buffer the video every few minutes (NetFlix works smoothly upstairs, closer to the Airport Express). Can I use a 2nd Airport Express downstairs to boost the signal? If so, how do I configure it?

    Yes, you can use a second 802.11n AirPort Express Base Station (AXn) to extend the range of the first one.
    Here are the basic steps to do so:
    Dynamic WDS - Extending a Wireless Network Setup
    If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    Open AirPort Utility, and then, select the base station that will connect to the Internet.
    Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    Click AirPort in the toolbar, and then, click Wireless.
    Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
    Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
    Enter the base station network and base station password if necessary.
    Click Update to update the base station with new network settings.
    (ref: Pages 43-44 of Apple AirPort Networks.)

  • How many devices can you use on an airport express wirelessly?

    How many devices can you use on an airport express wirelessly? Does it matter how many devices you have?

    The Express supports up to ten clients.

  • Can I use a second Airport Express unit to printe wirelessly?

    I have an Airport Express unit connected to my amplifier and my modem in order to listen to music wirelessly.  I would like to use my Cannon ip4300 printer the same way.  Can I use a second Airport Express unit to connect the printer to my modem?  If so, how is it done?  I am concerned about a conflict between the two Airport Express units.  Thank you.

    I do just this with a ip4200 printer - you "extend" the Airport network with the second Airport then plug the printer into the USB port, (you could plug it into the USB port of the first Airport as well)
    In the Airport utility (use 5.6 or 5.6.1) select the Printers tab and it should be there.
    Regards,
    Shawn

  • Can i use my european airport express in israel as a client for streaming music?

    can i use my european airport express in israel as a client for streaming music?
    thank you!

    Yes. There may be regional differences in the number of available wireless channels but it should work. Its power supply is universal.

  • HT4259 Q: Can I use an older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, are the instructions the same as for adding an Airport Express-n router?

    Q: Can I use my older Airport Express-g router (not -n) to extend my Airport Extreme-n wireless network? If Yes, Are the instructions the same as for adding an Airport Express-n router?

    If you want to extend, using wireless only, the 802.11g Express doesn't support this.
    However, if you want to use bridge mode over Ethernet or Powerline adapters then this is supported.

  • How can I use my old AirPort Express?

    How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express?  The AirPort Utility 6.1 will not recognize the old AirPort Express.

    Apple does not make it easy for you to use an older device when they want you to buy newer devices.
    See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
    This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty.

  • Can I use an old Airport Express to extend the range of a new Airport Express?

    Hi all.  I have an old Airport Express 802.11g (First Gen?) that is starting to fade.  Still works, but not what it used to be.  So I am going to buy a new Airport Express.  I'm not interested in the Airport Extreme.
    Question:  If I use the new Airport Express as my main wireless router, can I plug my old Airport Express into another room as an extender?  In other words, with the old Express and the new Express talk to each other or will a new Express only allow extension with another new Express?
    Thanks!

    Sorry, but the old AirPort Express 802.11 b/g does not have a setting to "Extend a wireless network", so it cannot be used as a extender with the newer AirPort Express if you plan to connect wirelessly.
    If you plan to connect the older Express using a permanent wired Ethernet cable connection, then it could be configured to provide additional wireless signal coverage in that manner.

  • How can i use my old airport express with my new imac and wireless hp print

    i just bought my first imac (intel) and a wireless hp printer. i now realize that a wireless connection between my imac and my printer needs a router.
    i have an airport express base station, which is a few years old. I can't find my documentation, so i don't know its specifications.
    how can i find out the specs of the airport express i have and whether i can use it now? it says that it is model a1084 100-240v~ 0.2a 50-60 hz.
    does that tell any knowledgeable people out there about the specs? can i search the apple website by serial number and find the specs?
    thank all of you potential responders ahead of time.

    Hi green jean
    Try this > http://www.apple.com/airportextreme/features/printing.html
    but also see > http://docs.info.apple.com/article.html?artnum=305293
    Dennis

  • Can I use my older airport express with an ext drive to backup time machine wireless, Can I use my older airport express with an ext drive to backup time machine wireless

    Can I use an older (flat) Airport Express to attach an ext hard drive and backup time machine wirelessly? and how?

    can I then connect a HD with itunes music and photos?
    Now we are drifting from the original question.
    Im alreadty using the HD attached to my Mac Pro...can I just connect it to the Extreme and access it wirelessly with any device on the wifi net?
    You may get another opinion on this from another user, but I do not recommend this either, based on a number of experimens over the years with this.
    Access to your data on the drive will be much slower. iTunes will tend to "lose" the library this way and you will have to re-point the iTunes application at the library on a regular basis.
    Things are even worse with the iPhoto library. The experts over in the iPhoto support area strongly advise that you do not do this, since any break in communication between the iPhoto application and iPhoto library can easily corrupt the entire library.  A wireless connection makes things even more dicey.
    My advice......Use a drive connected to the Extreme for storage or other backup copies of data.....not for "working" files or libraries.
    But, you may get some other opinions from users here.

  • HT4260 Can I use a new airport express to extend a network?

    If I am using an AirPort Extreme as my main wifi, but it is in bridge mode because I already have another router setup in dhcp on my network, can I use an airport express to extend my network, but use it hard wired?

    can I use an airport express to extend my network, but use it hard wired?
    Yes, assuming that you are asking about a new Express, or the 802.11n version. 
    This is very easy to do with the Mountain Lion operating system that you have.
    (The "roaming network" link above assumes that you are using the Leopard or Snow Leopard operating system...although the general information there is good).
    Connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the AirPort Express.
    Power up the AirPort Express and wait a full minute
    Click the fan shaped AirPort icon at the top of the Mac's screen and look for the heading of New AirPort Base Station. Just below that, click directly on AirPort Express there
    AirPort Setup will open automatically and take a minute to analyze your network and then announce that the Express will be setup to "extend" your AirPort Extreme network
    Enter a device name for the Express and click Next
    AirPort Setup will take another minute to configure the Express
    When you see the message of Setup Complete, click Done
    That's it.

  • Can I use an additional airport express to extend my wifi network

    Hi,
    I have an airport express running my wifi network but I have black areas in farthest away areas. If I buy a further express would that extend my network ? If so what would I need to do !
    Tnx

    Hi Matt
    Thanks for reply - my speed is already poor - what would be a better solution ?
    Tnx again

  • Anyone know how to use airport express to bring internet to a powermac G5 model power PC G5 using airport express?

    I bought an airport express and was told that I can configure it, and then move it to the G5 and connect it with the ethernet cable giving the G5 access to the network. But the laptop I first configure it to loses the connection once I remove the ethernet cable between the airport express and the modem. When I connect the G5 to the airport express nothing happens. Any ideas?

    Hello Ed,
    Is this how you set it up?
    http://www.apple.com/airport-express/
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • Airport Express and Popcorn Hour (or other wired only ethernet device)

    I have a popcorn hour media tank that has a wired only ethernet port. Can I connect this to an Airport Express base station, have the Airport Express connect to my existing wireless network, and have the popcorn hour or other wired only ethernet device get out to the internet?
    Once again for simplicity DSL>Wireless router>Airport Express>popcorn hour. The setup guide says that I can connect a modem to the Airport express, but it does not say anything about the Airport Express acting as a wired hub. Thanks.

    I recently purchased the Airport Express and plugged the SAME ethernet cable into it. Now my Laptop is no longer able to connect to the desktops or printers. The wirelss network works fine. I can get on the internet, just not connect to the other devices.
    Why??
    Effectively, you created a second network (subnet) when you introduced the AirPort Express Base Station (AX) in the mix. When computers are on separate subnets they have trouble "seeing" each other.
    To resolve this, you just need to reconfigure the AX as a bridge.
    To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
    Network tab
    - Distribute IP addresses (unchecked)
    - Apply the new setting.

Maybe you are looking for