Can I use a 4G/3G hotspot in the USB port on a Airport

I am using Hughesnet by the way of the Ethernet plugin on the Airport which is VERY SLOW.
Can I use my 4G/3G Mobile hotspot by pluging it in to the USB port on the Airport ?

Can I use my 4G/3G Mobile hotspot by pluging it in to the USB port on the Airport ?
Sorry, but no. The USB port on the AirPort Express will only work with a compatible printer.

Similar Messages

Why can I no longer use my exterior speakers connected to the USB port on my MacBook pro

QuestionWhy can I no longer use my exterior speakers connected to the USB port on my MacBook pro ?

Have you checked the Sound Preferences under the System Preferences and set it to USB speaker for the sound output? Sometimes it can change on its own or after and update of an App or the OS?

Can i use an old car charger with a usb port to charge my iPhone 5s?

Can I use an old car charger for a not smart phone to charge my iPhone 5s through the usb port?

Usually you can!
check if the specification of charger (USB output) is 5V (very important) and at least 500mA (more power like 1000mA --> 1A allow you to charge greater devices like iPad)
But personally is not good idea, because in short/long time can damage or reduce the life of battery of your iPhone/iPad etc.
Bye

I have a HP Laserjet P1102w printer hooked up to the USB port of my Airport Extreme. I'm able to print to the printer wirelessly from my MacBook Pro. My iPad (2nd gen) can't find the printer. What do I need to do?

My iPad is on the same network as the Airport Extreme. The HP printer is on the list of Airprint printers but I'm not using it as a wireless printer, per se, as it's hooked up to the USB port on the Airport Extreme.
I installed the HP ePrint app on my iPad. Unfortunately, the app could not find the printer either.
As mentioned earlier, I'm able to print wirelessly to the HP printer via my MacBook Pro.

ApplePearApple wrote:
Since I'm able to print to the HP printer from my MacBook Pro using this configuration, shouldn't I be able to print to the printer from my iPad, especially when all of the devices are on/using the same network?
Not necessarily. AirPrint uses a protocol separate from the communication protocol used for the Extreme's USB port. The HP printer may disable AirPrint when its USB port connected to a valid device, which is my reason for recommending you use it wirelessly.
From AirPrint Basics:
AirPrint printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported.
AirPrint printers connected by Ethernet are supported in OS X.
You may get more competent assistance from HP. See this HP support forum topic: iPhone & iPad can't Airprint to p1102w LaserJet
HP's Mac support has always been miserable though. I have been much happier since I abandoned HP and started buying Brother printers. They just work.

Apparently I cannot use this brand new 1TB G-DRIVE Mini in the USB port of my AirPort Extreme?

Even though an Apple "Genius" said I can. Seems to not be getting enough power, maybe. Why do they feature pictures of these G-Drives as examples for using this feature??? Or maybe I'm doing something wrong? When I connect it directly to my MacBook Pro it works fine, but when I plug it into the USB port on the AEBS it makes kind of a weak clicking noise and never shows up. I have a 500GB Western Digital PassBook that works fine for this purpose, so at least that one is getting enough power from the USB on the AEBS.

Thanks Bob, I actually found some of your advice for someone else with a similar issue during my research! I can see where a powered USB hub would probably help, considering it does seem like insufficient power (the weak clicking). And I do have it formatted as Mac OS Extended (Journaled). I guess I was just wishfully thinking the problem would be something else, because I know it supplies enough power for a lot of other external drives, including my WD.
But as a final rant...seriously, why do they have a nice picture of an airport extreme with a G-drive where they advertise this feature. That's just annoying and misleading. And the people at the Apple store need to be better informed and more knowledgeable on the products they recommend and sell to customers.

How can I play itunes music through one of the usb ports on my new MacBook Air?

Greetings Everyone.
I just purchased my first Mac product I want to be able to play music from the itunes app from one of my usb ports to the usb port on the front panel of my Yamaha CD changer. I want to utilize the buit-in DAC of the Yamaha. A friend was able to run his Ipad through it but I can't see a way to run my MacBook Air through it. When I go to System Preferences -> Hardware -> Sound the only item listed for Output is "Internal Speakers".
Any ideas? Thanks in advance.

Reset the SMC and PRAM
SMC Reset:
Shut down the MacBook Pro.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM:
Shut down the MacBook Pro.
Locate the following keys on the keyboard: Command, Option, P, and R.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Using iPAD 4G verizon hotspot via the USB cable to a windows pc

Has anyone ever done or knows anyone that has done a successful internet tethering via usb cable from a pc running windows vista to an ipad 4g running verizon cellular, (with a 3G or 4G LTE connection)?
I have tried many times but if nobody has ever successfully done this, I will stop trying or searching for a solution and assume that it cannot be done.
thanks,
dizzydoz

Attach the cable to your iPad and then to the USB, than go to settings chose the third option "personal hot spot" turn it on, a notification will pop up asking you if you want to use wifi or Bluetooth just select no and automatically work.

Can I use other mobile phonne other than the iphone to connect to airport extreme?

If so how can I configure my airport?

If your mobile phone is Wi-Fi capable (not just 3G or 4G), then it should be able to connect to the AirPort's wireless network just as it would to any Wi-Fi network. No additional configuration changes should be necessary on the AirPort router.

Can I buy an iPad which can be used as a Mobile Hotspot and used to make Phone Calls?

Can I use the new iPad as a phone and a mobile hotspot?

Yes, it can be used as a mobile hotspot if your carrier supports it. iPads can only make calls using Voice Over IP apps such as Skype or FaceTime.

Can I use my iPhone personal hotspot with my PC?

Can I use my iPhone personal hotspot with my PC?

Turn on Personal Hotspot on your iPhone, and then look for your iPhone's name in your computer's Wifi network list and connect to it.
It works essentially the same as a regular wifi network.

Can I use a wireless router to share a USB broadband connection

Hi - I have an emac or a mac minin which have a USb boradband modem. I use airport from the emac to allow me to connect from an airport enabled powerbook when it is at home.
Rather than getting an airport card for the mac mini, could I use that as the primary conection to the internet (via the USB modem) and then get a wirless router (eg netgear MR814) an I use a wireless router to share the USB broadband connection to the 2 airport enabled macs?
Or do I either:
1) need to get airport for the Mac Mini
or
2) Get a ethernet modem to plug into the wireless router
Any advice appreciated?
Tommy banana

Sorry my first post was a little unclear.
Hi - I now have an emac and a mac mini, both of which which have a USb boradband modem. I use airport from the emac to allow me to connect from an airport enabled powerbook when it is at home.
So that all can connect at the same time and rather than getting an airport card for the mac mini, could I use the mac mini as the primary conection to the internet (via the USB modem) and then get a wirless router (eg netgear MR814) an I use a wireless router to share the USB broadband connection to the 2 airport enabled macs?
Or do I either:
1) need to get airport for the Mac Mini
or
2) Get a ethernet modem to plug into the wireless router
Any advice appreciated?
Tommy banana

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

I am receiving a new ipad (3 i guess) from my mom who is in the U.S but i am currently in the philippines. I ofcourse, want to have apps,games,movies etc. can i use an itunes giftcard (also from the U.S) to buy my apps without any problems?

i am receiving a new ipad (3 i guess) from my mom who is in the U.S but i am currently in the philippines. I ofcourse, want to have apps,games,movies etc. on it. can i use an itunes giftcard (also from the U.S) to buy my apps without any problems?

No.
iTunes terms of service:
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance.

How can I use an IF ELSE statement and the xdoxslt: get_variable together?

First of all, I'm a big fan of this forum and I just want to thank the community for helping make the BI Publisher world a better place.
I'm trying to populate a table with a years worth of data with the column=PRODUCT and row=month of DATE. Here's the catch, not all of the months will have data. So here's where my problem is, I'm not able to use an IF ELSE statement along with a XDOXSLT:GET_VARIABLE expression so that if there's no data for that month the default value will be 0.
Can someone help me find a solution to either one of the attempts below or a completely new method? Thanks!
BP4 = numeric month value using DATE (more code to pull only month from DATE not included here)
JAN1 = PRICE if data exists, else 0
1) I tried this and it didn't work:
<?if: xdoxslt:get_variable($_XDOCTX,'BP4'),01 then xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE) else xdoxslt:set_variable($_XDOCTX, 'JAN1',0) end if?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
2) I tried this and it didn't work:
<?xdoxslt:ifelse(xdoxslt:get_variable($_XDOCTX,'BP4')='01',xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE),xdoxslt:set_variable($_XDOCTX, 'JAN1',0))?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
3) I tried this and it didn't work:
<?xdofx:if xdoxslt:get_variable($_XDOCTX,'BP4')='01' then xdoxslt:set_variable($_XDOCTX, 'JAN1',PRICE) else xdoxslt:set_variable($_XDOCTX, 'JAN1',0) end if?>
<?xdoxslt:get_variable($_XDOCTX,'JAN1')?>
<?end if?>
sample XML:
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-01-01T00:00:00.000+08:00</DATE>
<PRICE>31</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
-DrT
Edited by: 990965 on Feb 28, 2013 8:27 AM

let me clarify my logic, the template 1) searches for the relevant PRODUCT (in the case below, it searches for BPD which is the column in the table) 2) searches for the relevant month in DATE (which is the row in the table) 3) if data exists, get PRICE else default to 0
Variable definitions:
BP4 = numeric month value from DATE (more code to get this value not included here, but it works...)
JAN1 = set to PRICE if data exists for that month, else 0
the query is only pulling all of the existing data, so if there's no data for March then there wouldn't be a March entry in the xml. In the sample xml below, we only have data for the first two months (Jan, Feb) so that's the only data in the xml. I can't check if PRICE is null because the xml will not have any data for March.
I've read through other threads and it seems that BI Publisher can't use an IF THEN ELSE with the XDOXSLT:GET_VARIABLE. I sent the template and xml to you.
Sample XML:
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-01-01T00:00:00.000+08:00</DATE>
<PRICE>31</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
<ROW>
<Name>Craig Hernandez</NAME>
<DATE>2013-02-01T00:00:00.000+08:00</DATE>
<PRICE>30</PRICE>
<PRODUCT>BPD</PRODUCT>
</ROW>
Edited by: 990965 on Feb 28, 2013 8:30 AM

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

Can I use a 4G/3G hotspot in the USB port on a Airport

Similar Messages

Maybe you are looking for