Can i use a bluetooth headphone and a bluetooth cycle computer at the same time on a 4s?

I was wanting to get the wahoo bluetooth enabled cycle computer and heart rate monitor and use it at the same time as I use bluebird bluebuds bluetooth head phones. Does this many divices work at the same time?

No, you can connect only one bluetooth device at a time.

Similar Messages

  • Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7?

    Can I use iTunes 10.7 and iTunes 11.1.3 on the same computer running Windows 7 (64-bit)?

    Yes, but it needs to have at least two copies of Windows installed.
    (94491)

  • Can the airport express be used to stream music and act as network "extender" at the same time?

    I have a time capsule as my base station but need to improve network coverage in the other end of the house. Have a new airport express that I use for music streaming. Can this airport express be used for both music streaming and "network extension" at the same time, or do I need to buy another product?

    Yes, it can. You can either:
    Extend a wireless network. The Express needs to be positioned half way between the TC and the area without network coverage, and can be flakey. This is wireless only.
    Use Ethernet/Powerline. This is the preferred option (called a roaming network in Apple terminology). This allows for the Express to be placed wherever you want, as long as it reaches the other end of the house.

  • Can I have 2 Bluetooth connection active at the same time? Works with other phones...

    Is it possible to have one Bluetooth connection for "phone audio" and a 2nd connection for "A2DP" music streaming at the same time on my iPhone 5? My car-stereo has Bluetooth for phone calls but NOT for audio streaming. However, there's a 3.5mm aux in on the head unit. On my S5 I can create one Bluetooth connection to the car-stereo and select "phone audio" and a 2nd for my Bluetooth aux-in adapter. It works perfect since months but last week I changed back to an iPhone (5s) and it appears that I can only have ONE BT connection active at a time!?  Any ideas anyone?

    Hi SwedelostinAmerica,
    Welcome to the Apple Support Communities!
    The iPhone can maintain multiple pairing records, but it can only connect to one headset or hands-free device at a time. However, in your situation there may be a solution. You can connect the iPhone via Bluetooth for calls and use the 3.5mm jack on your iPhone and car radio to connect for music.
    The following article explains Bluetooth pairing and usage. Please use it as a reference.
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Have a great day,
    Joe

  • RD330 - using PCIe-based SSD and on-board RAID controller at the same time?

    I've got a RD330 (4304-E1U) with the on-motherboard RAID controller and an OCZ Z-Drive R4 PCIe-based SSD.  Basically the SSD looks to the system like a PCIe SATA controller with a single SATA disk attached.  If I leave the on-board RAID disabled in the BIOS (Setup -> Advanced -> Sata/SAS Configuration -> Disable SCU Devices=ENABLED), then the system sees the OCZ drive just fine and I can select it as my boot device.  Works like a champ, screaming fast.
    I *also* need access to the disks attached to the built-in SAS backplane on the server, but if the on-board RAID is turned off, then you can't access those disks.  When you go into the BIOS setup and turn on the on-board RAID (Setup -> Advanced -> SATA/SAS Configuration -> Disable SCU Devices=DISABLED), then the LSI RAID array configuration shows up during POST (as expected) but the OCZ messages do NOT appear during POST, and the OCZ no longer shows up in the BIOS as a boot device.  It's like the SSD isn't even there when the on-board RAID is turned on.
    I don't really need any RAID functionality on those disks, I just need access to them from the OS, but I need to boot from the SSD in the PCIe slot.  Is there a way for both the on-board RAID controller *AND* an additional PCIe disk controller to be active at the same time?

    I have had a 2.0 USB hub connected to the USP port on my AEBS for almost a year for a printer and a HD. Initially I had intermittent connectivity to the HD but never the printer. As Apple upgraded the software/firmware for the AEBS, the problems have stopped. Reliability has been 100% for several months. Go for it.
    Regards,
    Brian

  • SCXI 1112 and 1302 doesn't run at the same time

    Hi,
    I have SCXI 1112 thermocouple input module,  SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When  chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
    In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
    Could you please give me some advice to solve this problem?
    Thanks,
    Azra

    One piece of the puzzle you left out is the DAQ card being used in the host computer. 
    Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module.  Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ. 
    I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis.  Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
    Hope this might help. 
    RS

  • HT4111 can headset and bluetooth speaker work at the same time?

    On my iPad, can the headset option and a bluetooth speaker work at the same time? I am using the headset to listen to music, but I want my spouse to be able to hear the same music using a wireless bluetooth speaker in the other room.

    Sorry, of course I tried it and it did not work!
    To clarify, can it be MADE to work? The basic hook up does not seem to allow for both. I was hoping an intellengent, helpful person might be able to assist a novice.

  • I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

    Hi,
    Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
    The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
    cheers

  • Can you stream video and use the computer at the same time on a mac mini with hdmi

    Can you steam video and use the computer at the same time? I have a mac mini with hdmi.

    Shouldn't be a problem, unless you want to view it in Full Screen Mode at the same time with only one display.

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer?

    Can I have both Lightroom 3 and Lightroom 5 both installed on the same computer? I like the "fill light" feature in 3 and use it a lot. I would have not gotten 5 except that the images from my new Canon 5D Mk III are not re4cognized on 3. I have 5 on a laptop and 3 on my desktop but would like to have both on my desktop .

    Yes you can do this, but you can also get rid of Lightroom 3 and use the "Fill Light" command in Lightroom 5. You need to set the Process Version to 2010 (default is 2012 in Lightroom 5). Use the menu command  Settings > Process > 2010
    But honestly, you would be wise to stop using "Fill Light", as the new sliders in Lightroom 5 produce superior image quality than anything you can come up with using "Fill Light". Yes, the new sliders take a little time to get used to, but your patience and effort learning the new sliders will be rewarded. You can find some tutorials and videos on using Process Version 2012 on that Internet thing.

  • HT204368 How do I connect more than one Bluetooth enabled music device (subwoofer and Jambox) to my iPad at the same time?

    How do I connect more than one Bluetooth enabled music player (subwoofer and Jambox) to my iPad at the same time?

    You could start by posting onto an iPod forum instead of a "Using iPad" forum.  

  • Can I back up my old iPhone and transfer data to my new iPhone from the computer at the same time?

    Can I back up my old iPhone and transfer data to my new iPhone from the computer at the same time?

    iOS: Transferring information from your current iPhone, iPad, or iPod ...

  • Can i use one JSF component's value for other component in the same page.

    Can i use one JSF component's value for other component in the same page.
    For example
    I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like:
    <h:commandButton disabled="#{myChk.checked}" action="myAction" value="myValue" />
    ** "myChk.checked" >> I am just asuming "checked" property is available...

    Bind the checkbox to a UIInput myChk property. Then you can reference this property from the page, e.g.
    <h:selectBooleanCheckbox binding="#{myBean.myChk}" onchange="submit();" />
    <h:commandButton disabled="#{myBean.myChk.value}" action="myAction" value="myValue" />

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

Maybe you are looking for