Can I use a bluetooth usb interface to get wifi?

I have a 2001 G-4 Quicksilver. The Apple store told me they don't sell the old airport card anymore and I should hunt on-line--they now only sell the Airport extreme which I take is not compatible. The guy at the apple store said another option was to get a usb bluetooth adapter/ antenna. I talked to the Mac IT guy at work who said that should work in theory but might be slow b/c of usb. Should I stick with tracking down an airport card from an "antique" computer dealer? Am I misinformed? Pros and Cons? thank you -chris
2001 Quicksliver Mac OS X (10.3.8)

Welcome to Apple Discussions.
Bluetooth networks are inherently insecure, slow and difficult to build by comparison to WiFi networks. And, for what it's worth, adding Bluetooth via USB would not 'slow down' data transmission - USB is faster than Bluetooth.
Instead, take a look at a product like this for your Power Macintosh G4 Quicksilver model:
http://www.macwireless.com/html/products/11g11bcards/11gPCI.php

Similar Messages

Can I use a midi/usb cable to connect to garage band?

Can I use a midi/usb cable to connect to garage band? Or do I need to buy an interface such as M-Audio. I have the M-TRACK, but haven't connected it yet.

karbuckle10 wrote:
Do I need two cables back and forth between the M-TRACK or just one OUT from the piano and IN from the M-TRACK?
i must confess i haven't checked GBv10, but all previous versions (and i'm guessing GBv10 as well) have only supported MIDI-IN, so all you need is to run the keyboard's OUT to the interface's IN

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?

Can I use a Bluetooth headphone/microphone for capture sound instead of normal iPhone mic when shooting video?
The sound when I record video is not so good, so I'm trying to use the Bluetooth headphone/microphone to capture a person voice but not know which setting to use.

Hi Robert
Thanks for answering. I didn't know where to post other than the bluetooth forum which is relatively quiet and had no answers forthcoming.
Yes the voice isn't reaching the amp although it is registering on the input bar in the Sound System Prefs, just won't "play through" as it were. I can't see how it could be done I was just hoping someone might see something I am missing.
It seems a shame that you can't do it as iTunes on an old iBook makes a good juke box for DJ'ing and with everything becoming wireless these days it seems sensible that you could cut that one last wire.
Mike

How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

Can I use an external usb super drive on my iMac 10.6.8 ?

Can I use an external USB SuperDrive on my 10.6.8 iMac the internal drive is not working at all? Thank you.

DrGerega wrote:
Can I use an external USB SuperDrive on my 10.6.8 iMac the internal drive is not working at all? Thank you.
The answer is no unless you are willing to modify a system file. See this article. Read the entire thing and the comments before deciding if it is the route for you.
If it were me I'd go with Shootist's advice and get another brand--for the reasons he stated.
I have a SuperDrive that I use with my 2012 MBA but with my late-2012 27" iMac, which does not have an internal CD/DVD drive and therefore will work with the SuperDrive, I use a 3rd party that is both faster and cheaper than the SuperDrive.

Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB?

Can I use the ac/usb charger that came with my iPad 4 for my Classic iPod 80GB? I think I can, but I'm too chicken to try. Thank you ahead of time,
Mark

Thanks for the quick reply.

Can I use a standard usb PC keyboard with BOOT CAMP

Can i use a standard usb windows keyboard on my iMac running Windows 7 under BOOT CAMP?

No drivers needed? Keys are windows keys and not mac keys? Example, Insert key is not Fn key?

Can i use my snowball usb mic with Logic or Pro Tools???

Can i use my snowball usb mic with Logic or Pro Tools???

Hi there,
Did you find out anything more in regard to this?
I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
However the hardrive has just been replaced on the iMac which now has Snowleopard. I don't want to have to update to Lion and then fork out £500 for Pro Tools 10.
I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
Your advice would be appreciated
PXC

Can one use a samson USB condensor in a 1/4" plug in?

can i use my samson usb mic with some kind of USB to 1/4" connector so that i can use the mic as if it were a shure with 1/4
or is it just for computer use with usb in?

Probably not, since a condenser needs power to work, and a 1/4 inch plug is for a dynamic mic which does not.

In start disc mode can I use a external USB flash drive on MAC Book Pro

In start disc mode can I use a external USB flash drive on MAC Book Pro?

To do what? Yes you can connect a USB flash drive to the system and if it has the Recovery HD files on it you can boot from it. If it has the OS X install files on it you can boot from it. If it is large enough to contain a Time Machine backup on it you can restore your system from it.
So what do you want to do with the USB thumb drive?
Roy02649 wrote:
In start disc mode can I use a external USB flash drive on MAC Book Pro?

Can i use two bluetooth devices simultaneously with iphone 4s? Specifically,a bluetooth headset, as well as a new low energy bluetooth heart monitor?

Can I use two bluetooth devices simultaneously with iphone 4s? Specifically a bluetooth headset as well as a new low-energy smart bluetooth heart monitor?

I don't believe so.

HT4327 Dear Sir can i use Apple 10W USB Power Adapter for "iphone 4S"

Dears
1- Can I use Apple 10W USB Power Adapter to charge iphone 4S or it will affect battery performance ?
2- for how long i can use iphone 4s for internet access using 3G ? average ?
Thanks for fast reply

The apple charger is rated 100V to 240V, 50/60 Hz. You can use it in any country.

Can I use iphone 4s USB cable to recharge for the new ipad

Can I use iphone 4s USB cable to recharge for the new ipad

The iPod, iPad & iPhone cables are identical, however, the chargers are not.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

Can we use applets as user interfaces with sockets, RMI and J2EE

Dear Sir or Madam,
Since I am a TA for software architecture class, some one ask me the following question: I think the answer is "No" based on the document on http://java.sun.com/sfaq/
How I answer the quesions? Looking forward your help!!!
1.You may have 2 applets and 2 html files. One applet with one html file may stay at a client PC and run on this PC, and the other applet with the other html file may stay at a server PC and run on this PC. In this case, all the applets are run locally.
2.Could applets works with sockets, RMI and J2EE?
3.Can we use applets as user interfaces with sockets, RMI and J2EE?
Thank you very much!
Best regards,
Jing

The scenario you paint doesn't quite make sense. The "server PC" wouldn't be running an applet, normally, since applets are by definition in a web browser page, and most likely involve user interaction, and "server processes" generally are done without user interaction.
The security rules around applets are that -- by default -- applets can connect with sockets ONLY to the server from whence the applet was loaded. RMI uses sockets (J2EE is too broad a spec) and hence RMI calls would also be limited to the server from whence the applet was loaded. Within that limitation, an applet could open all the sockets it wants, so long as they are all on the server from whence the applet was loaded.
If you want two applets on two different systems to communicate with each other, the simplest way is to have them rendevous through a server process on the server(s) from whence each applet was loaded. Maybe it's PC-a <-> server-a <-> server-b <-> PC-b ...? Or maybe PC-a and PC-b both are talking to the same server.
The limitation is rooted in the security subsystem. You can specify a policy file and override anything in the security subsystem. That does mean signing the applet and then cajoling the user into agreeing to grant greater levels of security than the default. In such a case you can open sockets more broadly and then PC-a could talk directly to PC-b without going through any servers.
- David

Can I use the same USB cable for both the iPhone and the iPad?

Brnad new user of the iPad - can I use the same USB cable for both the iPhone and the iPad? The iPad does not charge when plugged into the computer or the wall (110V) adapter. I've been able to sync in iTunes using the same cable on both.

Actually, the iPad charger works just fine with iPhones and iPods. The iPod/iPhone charger will charge an iPad very slowly but no harm will be done.

Can I use a bluetooth usb interface to get wifi?

Similar Messages

Maybe you are looking for