Can I use a DAQ PCI-1200 with Labview 5.0.1?

I have a Labview 5.0.1 software, and I want to use PCI-1200 with it. Can I do that? My OS is Windows XP, but I can change it with Windows98/2000.

Hello jhylee,
The latest NI-DAQ driver for the PCI-1200 is 6.9.3, which is compatible with LabVIEW 5.0.1. LabVIEW 5.0.1 supports Windows 2000, but not Windows XP (although it may still run).
Have a nice day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

Similar Messages

  • How can I make DAQ VIs visible when using NI-DAQ 4.9 with LabVIEW 6.0?

    My operational system is Windows 98, I am using a AT-DSP2200 card and is configured. I have installed a NI-DAQ 4.9 (the last for this card) and I use Labview 6.0, but I can not find the DAQ VIs on the functions palette. How can I solve this?

    Hello;
    That version of the driver is too old to work with Labview 6i. The oldest version of NI-DAQ that one can combine with Labview 6i is version 6.1.
    You will need either to use another version of Labview, or to investigate a replacement hardware that you can use with newer versions of NI-DAQ.
    Regards
    Filipe A.
    Applications Engineer
    National Instruments

  • I want to use an old Daqcard 1200 with Labview 8.5. Where is the driver?

    I'm using Labview 8.5. I have an old Daqcard 1200 and there doesn't seem to be a driver for it. I downloaded an older version of NI-DAQ that claimed to have support for that card, but when I tried to install it wanted me to uninstall my newer version. Is there a way to use this card without going back to an ancient version of NI-DAQ?

    Unless there is some specific technical problem with interfacing to the old equipment, I don't think it is unreasonable at all to expect them to include drivers for legacy equipment. It would cost them very little to throw a few extra drivers into a package that encompasses their whole product line anyway, other than the missed opportunity costs associated with not selling new equipment in a few rare cases (which is probably what this is really about) .
    NI will probably explain better than i do. in general, they changed the way the DAQ driver operates, introducing also DAQmx. this is incompatible with the old way of functionning. for you, it forces you to choose the driver version to use.
    But anyway, it's not worth it for me to set up a machine just to run this thing. I'm just going to trash it. Thanks for the help.
    why dont you sell it over ebay? there are quite a bit that would love using it, for cheap enough. for example, this was one of the latest cards exhibiting 3 counters, operating differently than the modern version. it has its usefullness...Also, if this is the only one card installed in the computer, you wont miss anything with the new drivers
    ... And here's where I keep assorted lengths of wires...

  • How can I use my Keithley 2100 DMM with LabVIEW 7 Express?

    How can I communicate with Keithley 2100 digital multimeter using LabVIEW 7.0?

    Hi,
    There are a number of ways,
    1) Unfortunately the driver on the Keithley site is for labview version 8.0, so you could speak to keithley to see if they can provide a ver7.0 of the instrument driver
    2) You could use the version for the 2000 model from the NI website
    http://sine.ni.com/apps/utf8/niid_web_display.down​load_page?p_id_guid=E3B19B3E90B0659CE034080020E748​...
    There is a version 7.0 which you could modify to suit the 2100
    3) Use the VISA vi's and create your own driver using the user manual for the bus commands to driver the instrument.
    Hope this helps
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Is Ardence RTX required when I use PCI-7831R with labview real-time module for RTX target

    I am new in the labview real-time field. I want to use labview real-time module for RTX target on only one desktop. My card is PCI-78331R.  Is Ardence RTX necessary? Why I cannot find my card in the MAX after I configured the RTX?
    Thank you very much.

    Hi Ziaozhongda,
    You must have the RTX runtime engine installed before the LabVIEW Real-Time RTX module will install.  Additionally, you should follow the instructions in the "Using the NI PCI-7831R with the LabVIEW Real-Time Module for RTX" section of Getting Started with the NI 7831R (page 8).
    Please see Configuring Hardware for Use with RTX.
    Also useful is "How Can I Validate That My PC Will Run RTX?

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Can I use a sata3 hard drive with a late 2009 imac

    Looks liker the hard drive in my five year old iMac is about to go belly up. Was getting hardware errors, very slow startup and Carbon Copy Cloner reported bad blocks during the backup. I want to buy a new HD at a local store and have the Apple store install it. Will they do that and can I use a SATA 3 drive with my older iMac?

    YEs you can use a SATA III drive but the Apple Store will not install it for you. Find an AASP and see if they'll install a drive for you.

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • Can I use the Creative Cloud libraries with Illustrator CS5

    Can I use the Creative Cloud libraries with Illustrator CS5

    Hi Ilys Ravel,
    No, Creative Cloud Libraries feature is only available in CC 2014.1 release on-wards.
    Sanjay..

  • My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

    My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
    We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

    And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
    If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install.  Then copy that copy to any Mac you own where you want to install Lion.

  • Can I use my old apple speakers with my new I mac

    Can I use my old apple speakers with my new I mac

    If they are the old clear globe speakers that worked with old G4 models, then no.

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

  • Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

    can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • Can I use ICal 5.0.3 with Mountain Lion?

    Can I use ICal 5.0.3 with Mountain Lion? The new ICal dropped Reminders!

    Reminders App won't print and won't sort, etc with Calendar like it iused to. The old ICal is a better App.

  • Can i use a 3rd party superdrive with my Macbook Air?

    Hi,
    As my title says, Can i use a 3rd party superdrive with my Macbook Air rather than the Apple drive?
    Thanks.

    Mark Thornton wrote:
    Hi,
    As my title says, Can i use a 3rd party superdrive with my Macbook Air rather than the Apple drive?
    Thanks.
    This one works just awesome:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827136201&cmre=external_dvd_burner_usb-_-27-136-201--Product

Maybe you are looking for