Can i use a fibre media converter with verizon fios

I don't have wireless signal in my room because its too far away from the router, will getting this:
http://www.newegg.com/Product/Product.aspx?Item=N82E16833156005
solve the problem?

No you cannot. Even though they use the CDMA technology they are not actually the same.
Good Luck

Similar Messages

  • Can i use my sprint unlocked iphone with verizon

    i have a friend who gave me a iphone 5 from sprint and i was wondering is there anyway can i use it with verizon if the phone is factory unlocked ?

        That was very nice of your friend, skinny600. In many cases, you may be able to use a 4G LTE and CDMA capable device, like the iPhone 5, from another carrier on our service. We may not be able to guarantee the same quality signal on the device since it was meant for a different service, but you can visit http://vz.to/U2wgl6 to make sure the Device ID can be activated with a new Verizon Wireless SIM. If you already have a compatible Verizon Wireless SIM, you can easily activate the phone by inserting your SIM http://vz.to/1FKbLxs to the device. If you find you'll need a new SIM, you can pick one up from a local store http://bit.ly/3SdsA.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • How can i use a second router to replace verizon fios router?

    Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

    OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
    1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
    Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
    2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
    I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
    Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How do you burn videos taken with myIphone and stored on my computer to a DVD disc.  I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"?  I alos tried using Real Players file converter with no success!

    How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc.  I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"?  I also tried using Real Players file converter with no success!  Thanks in advance for any help you can give!

    Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion.  While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post.  A suggestion in that direction would help.
    Anyway, Apple is backing off from supporting optical media.  It also depends upon what you mean by "DVD".  A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV.  Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago.  I don't know if the old versions work under newer systems.  There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
    If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc.

  • How can I use pdf pack to convert cubase documents  (music scores)  into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

    How can I use pdf pack to convert cubase documents  (music scores)  into pdfs? I am looking for the former possibility to install acrobat like a printer but i don't have this option with "pdf pack". Can you help?

    Hi mariab,
    What format are those music scores (I'm not familiar with cubase documents). But, it may be that Adobe PDF Pack doesn't support that format. In that case, Acrobat is the way to go. You can then print your files to PDF as you'd like. You're welcome to try Acrobat for free for 30 days to see whether it's going to work for you. If you decide it is, and you'd like to use it going forward, you could convert your PDF Pack subscription into an Acrobat subscription.
    Best,
    Sara

  • Can I use an external hard drive with my ipad 2

    can I use an external hard drive with my ipad 2

    There are WiFi enabled portable hard drives available that can stream media, such as music or video, to your iPad, but no external hard drive in the sense of how you would use one with a computer.

  • What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

    Hi,
    What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
    Ushas Symon

    It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
    Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
    Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
    The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
    your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
    Good luck.

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Can I use a sata3 hard drive with a late 2009 imac

    Looks liker the hard drive in my five year old iMac is about to go belly up. Was getting hardware errors, very slow startup and Carbon Copy Cloner reported bad blocks during the backup. I want to buy a new HD at a local store and have the Apple store install it. Will they do that and can I use a SATA 3 drive with my older iMac?

    YEs you can use a SATA III drive but the Apple Store will not install it for you. Find an AASP and see if they'll install a drive for you.

  • Can I use Mac Dictate to convert voice memos to text?

    Can I use Mac Dictate to convert voice memos to text?

    If by "Mac Dictate", you mean the built in speech-to-text feature, no, you can't use that to convert a voice memo, at least not easily. Speech-to-text is designed to work on live speech, not recordings. But, there's no harm in trying.

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • Can I use the Creative Cloud libraries with Illustrator CS5

    Can I use the Creative Cloud libraries with Illustrator CS5

    Hi Ilys Ravel,
    No, Creative Cloud Libraries feature is only available in CC 2014.1 release on-wards.
    Sanjay..

  • My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

    My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
    We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

    And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
    If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install.  Then copy that copy to any Mac you own where you want to install Lion.

  • Can I use my old apple speakers with my new I mac

    Can I use my old apple speakers with my new I mac

    If they are the old clear globe speakers that worked with old G4 models, then no.

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

Maybe you are looking for