Can I use a Linksys WRT300N as a range extender?

Currently I have a Linksys WRT300N V1 that I am not using.  I do not get wireless coverage in my kitchen and back yard.  I want to use the WRT300N as an extended.  Is this possible?
Currnetly I have a netgear WRT600 connected to my modem (verizon fios).  I would like to use the WRT300N as a repeater/extender if possible.
Thanks
Brian

Linksys routers doesn't support repeater mode, If you want you can use WRT300N as an Access Point by connecting it hard wired to the first router.

Similar Messages

  • Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

    can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

    Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

  • Can I use my extreme as a wifi range extender? my dsl is a westel madem/wifi combo.

    can I use my airport exteme as a wifi range extender? my dsl is a westel modem/wifi combo.

    You can use the AirPort Extreme to extend the wireless network if the network has been created by another Apple router.
    The AirPort Extreme would not be compatible for the purpose of extending the wireless from the Westell gateway using wireless only.
    If you could connect the AirPort Extreme to the Westell device using an Ethernet connection, you have some other options. Post back if you need more info on this type of setup.

  • Can I use an old AEBS as a range extender?

    All I want to do is get it working so that my TV and BR Player can have internet access for firmware updates (and in the case of the TV, program and other software updates) so it doesnt matter if its going to be a bit slower than the rest of the network.  I'm currently using the current model AEBS in another room in the house, and really dont particularly want to have ethernet cables draped down the corridors.  I did plug in the old one (2003 vintage IIRC, its the one with the built in dialup modem: A1034) but my MBP could not see it to set up... ?need older airport utility?
    Anyway, it may be its not worth bothering, maybe better to just get an aiport express... or something over powerline... its just that I already have the older AEBS, and hoped to put it to good use.
    All advice and recommendations gratefully received

    Unfortunately, that older AEBS will not do what you want....even if you manage to find it in AirPort Utility.
    A "new" Express could be configured to "extend" a wireless network to provide more wireless coverage and both Ethernet ports would be available for Ethernet devices.....since the Express is configured as a "bridge" in this type of setup. If you need more ports, you can add an Ethernet switch.
    But then, you might be up to the price of a new AEBS....which could also be configured to "extend" and you would have 4 Ethernet ports available.
    Powerline could work as well. Hard to say...since the performance of EOP devices varies tremendously. This is one of those times when you won't know if something will work until you try....so it would be wise to understand the store's return policies before you buy.

  • Can I use an old Airport Extreme as an extender with a new Airport Express

    Hi All,  I have Verizon Fios and the data line runs into my bedroom.  I purchased a new Airport Express today to replace the Airport Extreme (from 2006).  Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there).  I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible?  If so, how do I set it up?

    Can I use the old Airport Extreme as an extender
    Is this the "round" or "dome" shaped AirPort Extreme?
    If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
    However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
    In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
    f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

  • HT1515 Can I use Air Port express as a signal extender for SKY Broadband router in UK?

    Can I use Air Port express as a signal extender for SKY Broadband router in UK?

    You are going to have to turn OFF Wifi on the Sky router device so its just a modem.
    String an Ethernet cable off of the Sky router to an Apple Airport/Time Capsule device and have that create a stable WiFi network.
    Using WDS protocols you can now add additional Apple Airport expresses as needs be to extend the Wifi signal area.
    In theory you should able to extend an existing network however inter-operability between differing manufacturers is flaky at best.
    Caveat using extenders Will degrade the performance of your network.
    So its going to be more expensive - Need Two Airport devices and you my need support in creating the network (you may have to log in to the Sky provided routers advanced settings in the Java Control Panel and from a web browser to turn off features such as Wifi and IP addressing)
    You may be better contacting Sky as they may actually have a compatible network extender (BT certainly do for their Home Broadband routers) available.

  • Using a Linksys WRT300N as head end for 1130AG

    We currently have a seperate DSL line connected to a Linksys wireless router/switch for public use. We were given an 1130AG access point and would like to find a way to use a switch port off of the Linksys to connect to the FA port on the 1130AG and have the AP pass DHCP requests and all other traffic to the Linksys. This works if instaed of the 1130AG I use another Linksys router. I am able to assign the second router a static IP off of the first router and that second router uses a different IP range for it's DHCP clients. Because the 1130AG is restricted to handing out 10 DHCP client IPs I can't do the same thing and supply enough IP's to the public in my Jury room. I have been unable to get the AP to use the Linksys DHCP assignments. I orignially tried assigning a mgmt vlan and gues vlan on the AP where the mgmt vlan and ssid are the same as the ssid on the Linksys. Neither was succesful though I was able to connect to the AP when I forced my laptop to connect to that MAC. I then tried only have the mgmt vlan and opening that up for public use, that met with the same results. Then I tried setting up the AP to have no vlan but use the same ssid as the Linksys, still no luck. If I set the AP to receive it's address by DHCP it receives that address from the Linksys but other client traffic doesn't appear to work. So the two units are speaking to each other.
    Has anyone tried to do this before? I know I should have a controller for the AP but I don't currently have the budget for that unit and the AP was given to us.
    Thank you in advance.

    You can get it to work, but the 1130 management has to be configured for vlan 1 and the ssid has to be mapped to that vlan also. The Linksys router along with other soho routers don't have support for routing and having more than one subnet.

  • Can i use more than one airport express to extend the airport extreme?

    my house is too big, and i use one airport express to extend my network,but the other half of the house doesnt get access to the internet.The question is can i use another airport express, without any complications?

    Yes, up to 255 if I remember correctly. But before you do that take a look at the products offered by QuickerTek to amplify the output power of a router and/or add gain antennae to help increase the router's range without the need for adding access points.

  • Can I use a second generation Airport Extreme to extend my Time Capsule network?

    I have a second generation Airport Extreme (circa 2009?) and am thinking of buying a Time Capsule. Can I use the Extreme to extend my network?

    Yes. Note; however, you won't be able to extend the 802.11ac mode of the new Time Capsule. Also be aware that the 2nd generation Extreme did not provide for simultaneous dual-band operation. That would mean that you will only be able to extend either the 2.4 or 5 GHz band, not both at the same time.
    ... so it can work in a limited fashion.

  • Can I use the E2500 to extened my range to a wireless signal across the street ?

    What I have is a wireless internet signal that my neighbor has agreed to share with me, as I am currently not happy with the Hughsnet Sattelite ISP service I have.
    My connection right now is connected to the neighbors wireless 2.4Ghz wireless setup, but I am hoping to get a better signal/reception than the 3 bars I currently have. Current configeration consists of Windows 7 on a Pc, running wireless PCI network connection to the E2500 router, and I have added a Belkin N600 Dual Band Range extender to the other end of the house, hoping to get a better signal, reception to my Neighbors wireless signal.
    I am doing this backwards ? or do I need to add something, somewhere to improve my signal to that Wireless Network ?
    Thank you in advance,
    Manshoon

    Hi Manshoon,
    In establishing a good wireless coverage, make sure to put the router in a higher location or in a less interference area. The E2500 router doesn't have the capability to extend the wireless signal. What I can suggest is try changing wireless channels. You can use an application that will help you determine which channel is perfect for your network. Changing channels will avoid interference or conflict on any other devices that might cause getting a low signal. You can also update the router's firmware for better performance. 
    Help, learn and share

  • Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

    Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

    The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
    The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
    So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor.  That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster.  A better term than "extender" really might be "repeater".
    If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
    With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
    Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
    The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
    If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
    That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

  • Can I use an Airport Express Base Station to extend non-Apple router range?

    We have a Netgear 802.11n router in our house. I just bought a MacBook Pro and now am accessing out wifi from the other end of the house along with my iPod Touch 4g. Both seem to show at best about half strength signal strength. House is small and nearly all devices on same floor.
    Can I use the Apple Airport Express Base Station as a bridge to extend our wifi network giving me stronger signal for my Apple devices or will it only work with Apple routers? Netgear and others like Hawking make wifi range extenders and those are still under consideration.

    It would be extremely unlikely that an AirPort Express would "extend" the wireless network produced by the Netgear router using wireless only. Apple's "extend" feature appears to be proprietary among Apple "n" routers. As far as we know, it does not work with any other manufacturer's products for the purpose of wireless only extension.
    If you are planning to connect the AirPort Express to the Netgear using an ethernet connection, then it could be configured to extend that way.

  • Can I use my WRV200 (VPN Router with Range Booster) as a Repeater?

    Hello gurus
    I have a unsecured wireless signal coming to my apartment.  Can I use the above device to capture this signal and give me a wired port (to plug a network cable) for my VOIP phone?
    Thanks
    Fouwaaz

    The Device doesnt have the functionality to be repeater. The device that you need is WET200 it is a wireless bridge that has a 4 ports on the back. Below is the Link for the Device http://www.cisco.com/en/US/products/ps10053/index.html 

  • Using a wrt54gs v5 as a range extender/repeater

    I would like to use a wrt54gs v5 as a repeater/range extender for a wrt160n. I know the N band won't work. trying just G-band.

    This will not work, at least not with Linksys firmware.  Your WRT54GS is designed to generate a wireless network, not connect to an existing wireless network.
    You might be able to find third party firmware, such as dd-wrt, to convert your WRT54GS into a repeater.

  • Using AirPort Express as a WiFi Range Extender

    I have a Westell Versalink 327 W combination DSL Modem and Wireless Router downstairs hooked up to an iMac via ethernet cable. Can I use the AirPort Express as a WiFi Range Extender upstairs? Any issues I should be aware of?

    I suggest that you check with DLink on this as using the same manufacturer will always give you the best chance at compatibility.
    Maybe this would do it:
    http://www.dlink.com/products/?pid=357

Maybe you are looking for