Can i use a monitor as a picture display

can i use a monitor as a picture display without any PC?

have you already tried a another adapter?
perhaps is just the pin for the green informations destroyed?
regards, stefan

Similar Messages

Remote Desktop windows 7 ultimate can't use two monitors

i have two computers in another office that remote into two other computers here at my site, all 4 computers run windows 7 ultimate, about a week to 10 days ago the two remote computers can still connect to the computers at my site but can only use one monitor
not dual monitors as before the 10 days or so. The use all displays box is checked in the remote desktop client, i have two sonicwall firewalls with a site to site vpn connection between the offices that they use to remote
can't get the dual monitors to work, any help would be appreciated

Hi,
Here is a good blog talking about using multiple monitors in Windows 7 ultimate and Windows Server 2008 R2, please take a look if there are any restrict policy settings regarding the monitor numbers like: "Limit maximum number of monitors per session"
Using Multiple Monitors in Remote Desktop Session
Best regards
Michael Shao
TechNet Community Support

Can i use any monitor with my g5

I have an Apple G5 computer with a DVi-I output for a monitor> can I use any monitor and purchase an adapter to to fit the DVI output?

It depends on what the monitor actually supports, the size of the monitor, & the Graphic card capabilities.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Power Mac G5: Display Compatibility
http://support.apple.com/kb/HT2707?viewlocale=en_US
http://support.apple.com/kb/sp96

Can I use another monitor with my iMac desk top?

Can I use another monitor with my iMac desk top? Our monitor screen is going out and would like to have another option then replacing the whole thing! I think A LCD TV would be less expensive than the repairs to our iMac.( OS 10.6.8 )

Yes, but we need to know exactly which year model you have? So that we can advise you on exactly which adapter you need for you iMac.
see > How to identify iMac models
Plus, adding that Computer Monitors make better displays than TVs and comparatively cost a little less than TVs.
For examples of monitors that have both DVI and VGA inputs:
see > LG 21.5" Widescreen FlatPanel LED HD Monitor E2242T - Best Buy
or > HP 20" Widescreen FlatPanel LED Monitor W2071D - Best Buy

I can't use dual monitors since upgrading to Lion

I use my HD TV as a second monitor for streaming movies etc. Since upgrading to Lion, I can only use one monitor at a time. Is anyone else having this problem?
Thanks

Yes, the blanking of secondary monitors is an issue.
In fact, it is the reason why I went back to Snow Leopard on my 3-screen iMac
I encourage you to contact Apple with feedback
I have taken the following actions:-
Provided feedback to Apple viahttp://www.apple.com/feedback/aperture.html
Provided feedback to Apple viahttp://www.apple.com/feedback/macosx.html
Submitted a bug/enhancement request via my free Apple Developer account
Written to pretty much every mainstream Mac publication
Encouraged every poster, like yourself, to raise this with Apple in your own words
Next week, I will call Apple Support under the AppleCare agreement for my iMac
Please give them feedback, and we might get this silly design decision changed.

Can I use any monitor, Can I use any monitor

Can I use any monitor with the new Mac mini?

Most all monitors should work. You may need a cable adaptor if the monitor doesn't have mini-DisplayPorts but you can purchase those from Apple Store Online.

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

Apple care Model MD012LL/A can be used with MacBook Pro 15" Retina display model MC975TH/A (Model selling in Thailand)?

Why not?

Can I Use Dual Apple LED 24 Cinema Displays?

I have a macpro(2008) and want to use two Apple LED 24 Cinema Displays.
How can I connect my macpro and two cinema displays.
GT120has one miniport. It's it better to buy two GT120?
or Should I buy DVI to miniport converter?
Message was edited by: mosquito7979

Hi-
Can I Use Dual Apple LED 24 Cinema Displays?
Yes.
Either another graphics card or an Atlona box;
http://www.atlona.com/Atlona-DVI-to-Mini-DisplayPort-Converter-p-17859.html
Either way will get your 24" LED displays connected.
If you use FCP, the box would be better......

How can i use two monitors in my application?

Hello,
Background
I have a dual monitor card and two monitors which I want to use in my LabView application. The application gathers data from a complex sensor and calculates a number of results which need to be displayed graphically, this happens every 10 seconds or so. There is an awful lot of graphs which may be needed to be seen at some time but not routinely. The idea is that one monitor will display all the standard routinely displayed things and will not have any user input whilst the second monitor will display a tab control which has all the other graphs pickable.
Question
What I want to know is how I can programmatically tell labVIEW to put one vi up in one monitor and another vi in the other. I would then have them both maximised (which I know how to do). I would rather have the monitors set up as individual and that way I could keep the windows control bar on one monitor only. Thus one monitor would be a true user interface and the other simply a display.
Basically how do I tell LabVIEW to use one monitor for a specific vi and not the other.
The card I have is a matrox p650. Any comments would be appreciated.
Regards
Kevin

Hallo,
with new version of LV its more easy, but it also hasn't any troubles with LabVIEW 6.x or 7.x.
Especially with Matrox P650 you will get no any problems (we using
exactly this card together with G550 and our application supported
three monitors at the same time.).
I recommend to you following sequence:
- After installing driver turn on option for supporting different
resoluton on different monitors. As result you will get two absolutely
separate monitors.
- In Windows define which one is primary and which one is secondary.
(On primary monitor located taskbar and all messages dialog boxes will
appear.).
- Arrange secondary monitor in display properties - where he located (left from primary, or right)
- In your VI (which must appear on second monitor) use
FrontPanel.PanelBounds Property Node for positioning. You must set four
values for two corners. Easiest way to found right values is following:
read this property node in while loop and put indicator on front panel.
Then run VI, drag front panel onto second monitor and resize if
necessary, and then you will see right values for PanelBounds. You can
write this property node programmatically in run-time too.
hope it help,
good luck.

Can I use my monitor with a Mac Mini?

I have this monitor from Dell, 19".
http://accessories.euro.dell.com/sna/productdetail.aspx?c=it&l=it&s=dhs&cs=itdhs 1&sku=53808
Can I use MacMini with this monitor without problems?
Problems like slow refresh or other problems..
I answer this because MacMini has only 64mb video shared memory...

Yes, you can use a switch. I do. I had to experiment to find one I liked. So I recommend that you buy from a store with an easy return policy.
RE RAM: "What have I done to cause this poor performance":
http://discussions.apple.com/message.jspa?messageID=3463183
"SLOW, beach-balling Mini":
http://discussions.apple.com/message.jspa?messageID=3528181
I'd also recommend the 1.66GHz with 2 Gig and combo-drive and an external burner for best value and performance:
http://discussions.apple.com/thread.jspa?threadID=822216

Cs5 or cs6 , can i use 2 monitors?

Hi
i'm under windows 7 and sometime xp
i have 2 monitors
can i use them with photoshop cs5 or cs6?
for example have the image in the bigger monitor or camera raw in the bigger monitor
and the tools in the smaller?
or viveversa?
thanks
cheers

Speaking of viewing a 'Vast expanse of horizon', reminds me of some of the Gamer's monitor setups I've seen on sites Tom's hardware. Six 30 inch Ultrasharps lined up side by side in portrait orientation.
In fact I have just had a quick look round, and there some insane monitor ‘solutions’ out there!
48 inch 2880 x 900 pixels from Alienware.
Flight sim anyone?
What amazes me is that software companies are actually investing serious money into coding games that make full use of OTT screen realestate, which suggests that there are enough people using such setups to make it worth their while.

ILuv portable DVD player, can I use as monitor from my Z1?...

Sorry, didn't know where to put this question
So I have one of these...
http://www.geeks.com/details.asp?inv..._-I1055BLKmain
First of all, can I use it as a monitor if I was to hook it up with my Z1? I'm guessing yes but on the item description it seems to suggest it only has outputs but on the player itself I have an option of 'OUT IN and IPOD'.
Secondly, the reason I'm asking this without testing it myself, is because the LCD screen on the iLuv player is cracked, so I'd like to know if it's worth getting it fixed or not for this use.
Hope you're all cool, Abi Titmuss!!! (Happy Christmas)
Alex

Sorry, that's weird...try this...
http://www.lambda-tek.com/componentshop/index.pl?origin=gbase3.2&prodID=B175589

Can i use a monitor as a picture display

Similar Messages

Maybe you are looking for