Can I use a PCI-DIO-96 with HP Vee 5.0

I'm trying to move an HP Vee 5.0 automated test program to a newer-faster-better computer and in to LabVIEW. But for a short time I need to be able to run both programs, to keep up with production during development and to prove the LabVIEW work the same or better. Can I communicate with the PCI-DOI-96 card from HP Vee? If so how?
I have no manuals for the Vee 5.0 and was unsuccessful in searching both websites.

If VEE has the ability to call a dll, then you should be able to use either traditional DAQ or DAQmx and communicate to the card. You might want to try the VEE Users Group as I doubt if you'll find many VEE programmers here in the LabVIEW forum.

Similar Messages

  • Can I use the pci-6259 card with SCXI?

    I need to know if the new M style daq cards will still work with the SCXI devices. If so, is there any additional hardware ie. cable adapters that I need?

    Craig,
    M-Series devices should work just fine with SCXI. You will need a new cable, as the connectors on M-Series devices are different from those on E-Series devices. I believe the following cable should work just fine for your application: SHC68-68-EP.
    Dan

  • How to use a PCI-DIO-32HS board with macintosh C++

    How can I run the PCI-DIO-32HS board with code from CodeWarrior for a Macintosh G3? The current drivers (V4.8) with Mac C++ support don't support this board.

    Here is a list of supported compilers with NI-DAQ 4.9.4 or earlier found on the www.ni.com/support website search
    Apple MPW 3.3.x
    Mainstay VIP-C 2.0.x
    Metrowerks CodeWarrior Pro 1
    Staz Software FutureBASIC 2.x.x
    Symantec THINK Pascal 4.0.x
    Symantec THINK Project Manager 7.0.x Symantec Project Manager 8.0.x
    Zedcor FutureBASIC 1.0.x
    If are programming in a different programming environment you will have to use Register Level Programming (RLP). For more information on RLP you can visit www.ni.com/support/daqsupp.htm and look under the Resources for register level programming link.

  • I am using the PCI-6110E/​6111E with the NI-DAQ software version6.7​.Is there a way to record at the same time analog and digital channels?I​f,ye

    s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is there a way to record at the same time analog and digital channels?If,yes can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition
    stops by a trigger?.
    Thank you for your interest in advance

    s can I have timestamps for each sample?I mean,is there a notion of time information on this board?Finally,is there a way to know ,in the double buffer's case,the number of samples in the halfbuffer which is not full if the acquisition stops by a trigger?.PALE wrote:
    >
    > I am using the PCI-6110E/6111E with the NI-DAQ software version6.7.Is
    > there a way to record at the same time analog and digital
    > channels?If,yes can I have timestamps for each sample?I mean,is there
    > a notion of time information on this board?Finally,is there a way to
    > know ,in the double buffer's case,the number of samples in the
    > halfbuffer which is not full if the acquisition stops by a trigger?.
    Start by looking around the examples that ship with LabVIEW (if you are
    using LabVIEW).
    Also look around zone.ni.com for general data acquisition information &
    examples. A good site.
    Mark

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Can I use a sata3 hard drive with a late 2009 imac

    Looks liker the hard drive in my five year old iMac is about to go belly up. Was getting hardware errors, very slow startup and Carbon Copy Cloner reported bad blocks during the backup. I want to buy a new HD at a local store and have the Apple store install it. Will they do that and can I use a SATA 3 drive with my older iMac?

    YEs you can use a SATA III drive but the Apple Store will not install it for you. Find an AASP and see if they'll install a drive for you.

  • How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

    No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
    Look at this very informative video for the instructions.
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • Can I use the Creative Cloud libraries with Illustrator CS5

    Can I use the Creative Cloud libraries with Illustrator CS5

    Hi Ilys Ravel,
    No, Creative Cloud Libraries feature is only available in CC 2014.1 release on-wards.
    Sanjay..

  • My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?

    My wife and I each have an iPhone4 with separate Apple IDs. We are hopefully about to purchase the 4th gen iPad; can we use iCloud on the iPad with separate IDs on the iPhones?
    We would like to have all our music, photos, etc. on the iPad - is it best to create a new combined Apple ID for the iPad and simply upload our music, photos, etc. via our laptop instead? Does this not then render the iCloud useless to us?

    And just in case you were wondering, installing one purchased copy on all the Macs you own is specifically called out as allowed in the Mac OS X Lion license.
    If you do not want to download multiple times, just copy the Applications -> Install Lion app to a safe place BEFORE you do the first install.  Then copy that copy to any Mac you own where you want to install Lion.

  • Can I use my old apple speakers with my new I mac

    Can I use my old apple speakers with my new I mac

    If they are the old clear globe speakers that worked with old G4 models, then no.

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

  • Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

    can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • Can I use ICal 5.0.3 with Mountain Lion?

    Can I use ICal 5.0.3 with Mountain Lion? The new ICal dropped Reminders!

    Reminders App won't print and won't sort, etc with Calendar like it iused to. The old ICal is a better App.

  • Can i use a 3rd party superdrive with my Macbook Air?

    Hi,
    As my title says, Can i use a 3rd party superdrive with my Macbook Air rather than the Apple drive?
    Thanks.

    Mark Thornton wrote:
    Hi,
    As my title says, Can i use a 3rd party superdrive with my Macbook Air rather than the Apple drive?
    Thanks.
    This one works just awesome:
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827136201&cmre=external_dvd_burner_usb-_-27-136-201--Product

  • How can I use a Verizon iPhone 5 with US Cellular?

    How can I use a Verizon iPhone 5 with US Cellular?

    You can't. Doing so is not supported.

Maybe you are looking for

  • My Apple ID had been disabled what do I do

    Apple ID is disabled and I have changed my password and everything and now it won't let me make purchase or update things

  • Advanced Software Rendering Solution For Games

    I am actually looking to talk to someone at sun but figured someone in this forum might be interested in what I have done as well. A few years back I developed a feature rich 3D api for java that is 100% software based. I realize there are some other

  • Print in foreground for 4 alv using splitter

    hi All, I have created a program which displays 4 different alvs on a single screen . I have used one container and 4 splitters to display the alv. after the program is executed ,there is a button (print) through which all 4 alvs should be sent to a

  • ME41 - Language of the Ordering Address

    Hello Experts, I need a clarification when creating an RFC. I have a Vendor XXX whose language is DE. The Ordering address (OA) of the vendor is YYY whose language is EN. Now When I create a RFQ and gives the vendor XXX it is taking the ordering addr

  • Make JList Recalculate Component Widths and Heights

    I have created a subclass of JList in which every item in the list has an associated icon and the text for the item is displayed underneath the icon. The JList is given the HORIZONTAL_WRAP layout orientation by default. I have an option to show the i