Can I use a SCXI system with 1102Cs and 1120D AND control a GPIO on RTSI0?

I have a complex system with multiple DAQ cards and a SCXI chasis on a 6341.
I need to place a GPIO software controlled digital signal on RTSI0 (preferably).
Can I run the SCXI chassis AND use the 6341 card to control a TTL line on RTSI0?  Getting to the HW is difficult, so I would like to know this before I set out.  NI tech support has not been helpful getting this resolved.
Thanks

Hey Jed,
I just wanted to let you know that our support team is working on the issue, but if anyone else has other options we are welcome to any suggestions.  
We should get back with you soon,
Regards
J Newk
Systems Engineer
National Instruments

Similar Messages

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • HT4111 Can I use my magic mouse with my wireless keyboard and iPad2

    Can I use my magic mouse with my wireless keyboard and iPad2

    Sorry, but no. Because the iPad does not have a cursor for you to use the mouse with.

  • Can I use windows Me/98 with my ipod nano and I need itunes help??!!

    Hey!!,
    Ok so I just recieved my Ipod nano today from the post man! and I want to use it with windows Me/98 is that possible?
    I also downloaded the newest version of itunes and it said that "itunes requires that your computer is running windows
    2000 or windows XP".Can I use a later version of itunes with me ipod nano and where can I download it from ?!
    someone please help me Im dying to use my ipod nano!!

    You cannot use iTunes under Windows 98/ME. For just synchronizing tracks with your iPod, you could get a third-party utility such as Anapod, Ephpod, or Xplay for handling the transfer. I haven't used any of these and I don't know if any support the new iPod nanos, so I can't make any recommendations. These applications cannot connect to the iTunes Music Store, so unless you upgrade, you won't be fully supported and will not be able to purchase tracks from the iTMS.
    I strongly suggest you consider upgrading your version of Windows, though. Windows ME is no longer supported by Microsoft and it's going to get harder and harder to find applications that will work under 95/98/ME.
    Hope this helps.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Can I use ODT 10.2 with Visual Studio 2005 and 10g Express?

    If so could anyone provide a pointer to some installation instructions? The one time I tried to install it I didn't seem to be able to connect to the database from within VS. I had to resort back to the previous version of ODT running under VS 2003.
    Thanks in advance,
    Stewart

    The special version of ODT for Express only works with VS 2003 and it is an older version of the software that does not include the PL/SQL debugger.
    That being said, you can install the latest ODAC and use it with Express with no problem.
    Go here:
    http://www.oracle.com/technology/software/tech/windows/odpnet/index.html
    ..and download the first link you see. Install it in the default Oracle home it chooses. Then you'll need to configure the tnsnames.ora file in the \NETWORK\ADMIN directory such that there is an alias for your Express database... you could probably just copy the tnsnames.ora file from the Express home to the new oracle home to achieve this.

  • I can't use my password manager with firefox 5.0 and I want to go back to a previous verions but I can't work out how to do that

    Roboform doesn't work with firefox 5.0, but it worked with my previous version of firefox. Moreover my internet banking site does not recognise firefox 5.0 either. I want to go back to the version I had (version 3.x.x I think), but I can't see how to do it.

    @the-edmeister got me on the right track. I did have the working version of evernote, BUT I had to find the shortcut elephant button by choosing to customize the toolbar. It was at the bottom of that scroll down list. A bit tricky... And I really do need the little elephant!
    Unfortunately the Evernote site has left up information inferring that they aren't compatible with Firefox 5.
    All is good, except for my loss of work time.
    Thanks.

  • Can't use comcast email account with Firefox. Why and how to fix it?

    I cannot open my comcast.net email accounts. I can see the Inbox Preview page but I can open, send a new email, etc.. It started Monday evening November 11, 2011. It happened a couple of times a few weeks ago then resolved.

    Download and install the 10.6.8 Combo Update over your current installation of 10.6.8.It should repair whatever is corrupted. The Mac App Store does not belong in the Utilities folder, Mac OS X expects it to be in the Apps folder where it is installed..
    Mac OS X v10.6.8 Update Combo v1.1
    http://support.apple.com/kb/DL1399

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • Can I use the pdf fax with a DSL line

    Can I use the pdf fax with a DSL line and, if so, how do I get the pdf fax modem to appear in my printer options? No Modems appear in my Modem pop-up menu.
    Thanks,

    Should I be able to fax using the internal fax software if I set it up with the proper settings?
    Yes, if it's not a purely Digital line, dial that FAX number on your Phone, does it answer with a screech?
    Must I disconnect all my other lines in order to use this?
    No, you shouldn't need to... do you have DSL Filters on all lines except the DSL connection, like these...
    http://www.twacomm.com/info/DSL_Filters.htm
    Oh, it's not clear, do you have 2 actual Lines/Phone numbers, or do they share the same line?

  • Can I use thermocouple type L with NI4351

    Can I use thermocouple type L with high resolution temperature and voltage loggers NI4351
    if yes, then where I can find accuracy data

    Hello,
    I could not find the milliVolt input ranges for that specific type of thermocouple. What I did find was that it has a temperature range between -200 and 900 deg C. Since the temperature ranges seem similar to other types of thermocouples, you can compare these to the ones mentioned in Appendix A of the NI-4351 User's Manual (www.ni.com/manuals, and make a search for "4351") in order to get an idea of the accuracy that you can expect.
    Regarding the software, there's two options:
    1. To use NI-DAQ: with this, you can create a Temperature Custom Scale and use it with a Virtual Channel so that the Voltage readings will be translated into Temperature readings.
    2. You can use the NI-4351 own drivers for reading the voltages, and then you can
    add software tables to your program so that those voltages will be translated into temperature values.
    Good luck with your application!

  • Can i use someone else iPad with my apple id

    Can i use someone elses ipad with my apple id and download items?

    That should not be a problem if you wish to use other's apple id for your IOS device.
    However, if in the future you need to update the apps, which is needed to be done from time to time, you need to have the password of that person's apple id as well.
    It is better to have your own apple id for convenience.

  • Can i use the magick trackpad with the ipad?

    can i use the magick trackpad with the ipad? and the iphone?

    I'm looking for this same answer, I wonder if any new info. I've gone from posts saying why would anyone want to, and I now see that this is in the ATV section, which actually suits me because the setup I'm using it for is when I don't want to be up in my office on my iMac, but rather in the lounge in front of the big screen with my iPad mirrored to the Apple TV and bt keyboard connected. I wouldn't actually suggest anyone go out and buy a Magic Mouse or trackpad, but since I already have them would like to use it to make things easier when using my iPad as a mini computer with my TV as the screen. I can currently use the iPad to scroll no problem, but if I have to click somewhere specific then I must look at the iPad screen vice just moving a mouse or trackpad and having a pointer show up on my screen.  Obviously if my iMac was much closer,  I could mirror that screen and my keyboard and mouse would work just fine. (That is if my iMac was newer, but it's not, its a late 2009 model and that apparently is not new enough to be compatible with airplay mirroring.)

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Solution manager can be used as repository DB with out-of-box integration?

    Solution manager can be used as repository DB with out-of-box integration?
    Hi ,
    In Our Global SAP Environment, We are looking to use solution manager as a CMDB ( Config management DB) , which is kind of repository DB where it needs to keep track of infrastructure components .    
    A CMDB about Host consists of elements like
    No. of CPUs,
    RAM  size,
    ...etc
    For example in solman SMSY , you get some  information about the SAP Host . 
    we have multiple CMDB systems , each one for our supplier .
    For example Host hardware () CMDB is managed by Vendor1,
    Storage CMDB by  vendor 2  , and we need to join the both information , in order to get the Full elements of the Host .
    A host information spread across the Multiple Vendor CMDBs.
    Now we want to use solman as single CMDB, where Solman keeps track of some data , and needs to get some additional data  from vendor1 by connecting  into
    their DB using  the  username/password ..etc
    Does the solman has this Out-of-box functionality?
    Thanks
    Vasu .

    Hi - smilar question
    If we setup the system monitoring using solution manager , can we able see the TCodes & their screens from solman .
    For example Can I able to control my ECC screens (SCC4, RZ10,SMLG,SALE,SPAD,SM59,.... ) from Solution manager ?
    waiting for the reply .
    Thanks
    Vasu

Maybe you are looking for