Can i use a seagate external drive with my mac?

Hi, probably a dumb question but i want to make sure before i buy, can i use this drive-
http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=18283 84&Tab=5
with an imac g5? to me,it seems like a good price. i have fceHD and a 1.8 g5 with 512 ram. Thanks in advance. Ben
Imac G5 Mac OS X (10.4.4)

The hard drive itself is excellent. I have two external FireWire/USB 2.O drives, both of which contain Seagate drives similar in specification to the one you propose to buy, though both are 300GB in size. My question is whether the drive enclosure is a good buy (i.e. one that will work with your Mac). You want an enclosure with a good FireWire Bridge chip, such as the Oxford 911, which is known to work well with Macs. I looked at your link, but I could not tell which chip is found in the enclosure.
I would not buy this until you find out what kind of FireWire Bridge is in the enclosure.
You may wish to check out the selection at Other World Computing. This is a company that specializes in Mac products, so you know your product will work with your Mac. You'll pay a bit more for a similar hard drive at OWC than the one you are considering presently, but as they say, you get what you pay for. OWC backs it products with a great warranty, too.
iMac Intel Core Duo 20", 1.5 GB RAM, OWC 300 GB FW HD Mac OS X (10.4.5) eMac 1.42GHz, 1 GB RAM; iPod w/ video 30 GB

Similar Messages

Using a seagate external drive with multiple macs

i got a 1TB seagate external hard drive for backup and transfer purposes... it had a little program to help set it up and i set it up for use with mac and pc ( only onther option was stricty this computer.) it works on my computer and a pc but when i tried transfering files from another older mac i have it showed that i could only read on that computer...
how can i get it to work with multiple macs...?

I have the oldest macbook (1.83. 2 gigs ram, 60 gig internal hard drive)
I have all my logic content on my external maxtor firewire 400 drive (usb 2.0 is actually faster than firewire 400) and everything is fine. the good thing is if your external drive has 7200rpm, but the ones with 5600rpm should do as well.
Once you drag your apple loops to logic from your external drive, logic will remember for the next visit. And when you are opening a project which is on the external drive , just find it with logic finder and all should be fine.

Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
Would an external 2tb My Passport Drive by Western Digital work for the backup?
It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

How can I interchange a Toshiba external drive with my Mac and Windows? It only works read only with the Mac.

I bought a Toshiba external drive IT and I can copy files to it from my Macbook Pro 5,3. I would like to know how canI interchange files with Windows and the Mac.

If the disk is read only, it is formatted for Windows and the Mac can't write to it
Reformat to FAT32
This will of course wipe all data so move it first
Allan

Can I use a sata3 hard drive with a late 2009 imac

Looks liker the hard drive in my five year old iMac is about to go belly up. Was getting hardware errors, very slow startup and Carbon Copy Cloner reported bad blocks during the backup. I want to buy a new HD at a local store and have the Apple store install it. Will they do that and can I use a SATA 3 drive with my older iMac?

YEs you can use a SATA III drive but the Apple Store will not install it for you. Find an AASP and see if they'll install a drive for you.

Can I use a USB thumb drive with iPad

Can I use a USB thumb drive with iPad2

What do you want to do with the thumb drive?
If for picture/movie files, You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
 Cheers, Tom

HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

When you enable Internet Sharing in OS X, you are creating a separate sub-net.
There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

Can I use a Asus Nvidia gt640 with a mac pro 2006?

Just got my first intel mac! Not the newest thing but it will do. I just have a quick question, can I use the Nvidia gt640 2gb with a Mac pro 2006 with no flashing of the system or the card. Thank's. -Edward

First, you need to look at what OS version you have. Mnay people (myself included) running some of the newer OS version are using Nvidia cards not released for the Mac. OS X Mavericks for example will support these cards, but you lose some functionaility (boot screen, etc.) Once the machine is up and running they work fine.
With a 2006 model you are before the 3.1 machines and therefore limited in the OSX version you can run. I think you need at least 10.7 Lion.
So if you can run 10.7 the answer is probably, but then you will lose some basic functionality. For many this is not important.

Using the same external drive with Time Machine on new mac?

I recently got a new mac because my old one broke. Thankfully, I had a fresh backup on Time Machine ready to restore onto my new computer. But when I try to use Time Machine with my new computer, it keeps wanting to do a whole new backup. It won't recognize the latest backup to only add new or changed files.
Here's a breakdown of my events:
new computer
restore Time Machine on new computer at install
want to continue using the external drive with Time Machine from where I left off (only adding new files since the last backup) on my new computer
Time Machine wants to do a whole new backup
Question: How can I continue to use my existing external hard drive with Time Machine on my new computer, picking up where I left off (not a new, complete backup)?
My old computer was Snow Lepoard, my new one is Lion.

Bergers wrote:
new computer
restore Time Machine on new computer at install
That should have left a "trail" in your SystemMigration log, so Time Machine can figure out what happened and automatically "inherit" the old backups. But sometimes, obviously, that doesn't work.
Since it didn't, there's a chance you can do it manually. See #B6 in Time Machine - Troubleshooting.

Can I boot from an external drive with a "Virtual CD"

I just purchased a Hitachi LifeStudio external hard drive for use as my Time Machine backup. When I plugged it in to my MacBook running 10.6.4, I realized that it had one of those "Virtual CDs" that contained the manufacturers crapware, similar to Western Digital's MyWare or whatever its called. It shows up in disk utility as an actual separate disk and not just another partition that can be wiped.
I reformatted the drive using GUID and and created 3 HFS+ Journaled partitions. One was going to be for the 10.6 installer, one for the 10.6 boot, and one for my time machine backup. I restored a 10.6 install dvd disk image I created using disk utility to the 10.6 installer partition (with erase destination checked) then option booted my mac and the partitions did not show up. The only thing I could see was my internal hard drive.
I have done this many times before and it has always worked so Im trying to figure out what Im doing wrong. The only thing I can think of is that the "Virtual CD" that Hitachi put on this external drive is stopping the Mac from seeing the bootable partitions I created. I even went into system preferences>startup disk and blessed the 10.6 install partition. That didn't work either, the computer just booted to my internal drive.
So my questions are. Is it because of this "Virtual CD" that I can't boot from my external drive? If so, is there a way around it? I already searched their web site and emailed their tech support asking for a firmware update to remove the virtual cd.
Thanks in advance.

Yes, it's a known issue. You've already referred to the issue with WD systems. WD has a long list of products that are either not compatible with Macs or won't boot a Mac.
There are practically no problems with bare drives, but once installed in an enclosure there is no guarantee that the package will function as a bootable device. This is especially the case if the manufacturer uses some sort of "virtual" scheme intended for using the device as a sort of one button backup device.
External drives don't have to specifically say anything about being Mac bootable or compatible. It's up to the consumer to verify compatibility and usability.

How to use seagate external drive with Mac

i have just purchased a SEAGATE EXPANSION EXTERNAL DRIVE, USB 3.0...can i use it with my Mac OXS....10.7.4....

No trouble for a few minutes, then I have to go out.
Re 'Too much detail'   When you ask a question such as the one we are working on, suitable detail would be ...
I have an (Apple item, iMac,model etc) running on (OS X 10.7.4).   I have just purchased a Seagate (size, model etc) external drive and would like to use it for (list uses).   Then ask specific questions.
If I can make this observation.    You appear to have gone out and bought a Seagate drive from somewhere without knowing what it will be used for.   They are not cheap.
It may be worth while to go and talk to whoever sold it to you and ask how you can best use it to meet your needs ... or if they will advise you how to set it up.
Most decent shops will oblige.
But if it was an on-line purchase then my original suggestion of talking to Seagate is probably the best line to take.
Hope you find all this helpful.
Message was edited by: seventy one

Using a usb external drive with logic

I have a 500 GB Lacie usb hard drive which I'm currently using just to backup my system. (Still on Tiger by the way.) I'm in an older intel iMac (1.83. 2 gigs ram, 250 gig internal hard drive). After installing LP 8 and all the bells and whistles on the internal drive I now have less than half of my internal drive space available. My logic project files are there as well. Not a big problem but I'm trying to look further down the road... Usb drives are slower than firewire but my projects are relatively simple. I don't record more than 2 tracks simultaneously and rarely exceed 24 tracks total for a song. Two questions. First can I get by with my usb external drive? And second how do I move my projects onto and external drive and still have logic know where they are? Thanks

I have the oldest macbook (1.83. 2 gigs ram, 60 gig internal hard drive)
I have all my logic content on my external maxtor firewire 400 drive (usb 2.0 is actually faster than firewire 400) and everything is fine. the good thing is if your external drive has 7200rpm, but the ones with 5600rpm should do as well.
Once you drag your apple loops to logic from your external drive, logic will remember for the next visit. And when you are opening a project which is on the external drive , just find it with logic finder and all should be fine.

Can I install Tiger on external drive with OS9 on internal?

I bought and plan to install OS X 10.4.3, but will continue to use OS 9.2.2 about 95% of the time because I can't afford to update all 3rd-party software at this time, so I want to start up in 9.2.2 usually. Can I install 10.4.3 on a partition of my external HD with firewire and leave 9.2.2 on my internal HD, then pick a start-up OS by a key combination or such? How should I do it, and what problems might I encounter? To partition my external HD should I use OS 9.2.2, the original 9.0 CD, or the new 10.4.3 DVD?
I have a Power Mac G4 (AGB Graphics) with an internal 10 GB HD and an almost-empty external 120 GB firewire HD (Iomega). Thanks.

Welcome to Apple Discussions!
Yes you can do that, though I'm not too sure that Iomega's firmware is up to date to do it. Be sure that any data you have on the Iomega is backed up elsewhere before attempting it. Some Firewire drives without up to date firmware from the manufacturer may become invisible and unusable after a software update on Mac OS X 10.3 or later. Also an AGP PowerMac needs its firmware updated while booted from Mac OS 9 before installing Mac OS X 10.2 or later:
http://docs.info.apple.com/article.html?artnum=86117
That said, if after testing you find it does work, you can switch booting between both drives using the Option key booting as described in the Startup Manager article:
http://docs.info.apple.com/article.html?artnum=106178
Leave OS 9.2.2 on your internal, and 10.4 on your external. That will be a lot easier than partitioning. Some information I wrote for others which can help you on your migration to Mac OS X is provided in this link below:
http://www.macmaps.com/macosxnative.html
If you really want to partition, be aware that only third party software is available to partition without erasing the entire drive, and you'll want to make sure additional partitions that will boot Mac OS 9 have Mac OS 9 drivers installed as my link above states. Whatever you do, be sure you have at least two copies of your data at all times:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Can I use any SATA hard drive with an iMac?

Hi, I'm a PC user from birth, and want to purchase an iMac, but the 500gb-1tb isn't enough storage for what I currently have on my PC (I have 4x 250gb hard drives, plus I'd need more room for the Mac OS). My question is, can I use any HD in the iMac, or does it have to be a "mac" hard drive? Also, can I hook up any external hd's? If this is the case, I'll buy 5-10 external enclosures for my hd's and build a custom box for them all. (Or put it in a slower PC I have, and run as a server, as I have to sell my good PC to afford a iMac)

My iMac reports its internal HD as 'WD3200AAJS' (WesternDigital Caviar SE line),
so it appears to be a standard form-factor HD with a standard SATA interface.
http://www.wdc.com/en/products/products.asp?driveid=305&language=en
Google-around for photos of a disassembled Mid-2007 iMac. I ran across
some pics the other day, but unfortunately, didn't bookmark them. The link
below shows the insides of a slightly older model.
http://home.comcast.net/~woojo/DFFA53A0-F23D-4541-9015-481FD3B6532E/iMac_Disasse mbly.html

How can i access my lacie external drive with os mountain lion

I have just upgradet my macbook pro from snow leopard to mountain lion, and now i can't restore my backed up files from my Lacie external drive.
When i try to connect to it through time machine or migration assistant i get the message:
"the version of the server you are trying to connect to is not supported"
I have tried to enable all UAMs but i still can't connect.
I have browsed after other similar situations, but i can't seem to find any though i'm hardly the only one with this problem.

If the backup was made using time machine, you should be able to access any files you need or want manually using the finder. It may not be pretty, but it should work. I don't know why the migration assistant would be unable to access it though.
If you can't access the contents of the backup with the finder, then I would say your problem is a bit more serious.

Can i use a seagate external drive with my mac?

Similar Messages

Maybe you are looking for