Can i use a second express to increase my signal

can i add a second airport express to expand my internet signal?

Yes, if your "first" AirPort Express is the "n" version of the product.
Check on the side of the device for the Model No in the faint print. You need to see Model No A 1264 there.
If that is what you have, you can add another AirPort Express and use these instructions to configure both AirPorts:
http://support.apple.com/kb/HT4259
The illustrations picture an AirPort Extreme, but the setup for an AirPort Express is exactly the same.

Similar Messages

My wifi is not too strong in one room, can I use an Airport Express to boost the signal?

I have an Airport Base Station but the signal is only one or two bars at one end of my house. Can I use an Airport Express to boost the signal?
Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?

Also the AE I have is an older model and I can't get Mountain Lion to talk to it. How can I get around this?
You might want to look over this article:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Can you use another airport express to boost

I already own one airport express as my primary wi-fi, can I use a second one to boost the signal across the house?

Your friend has two AirPort Express devices, but the second that he bought is not configured to "extend a wireless network", despite what he might believe.
As I previously mentioned, the "extend" setting can only be used when the Express devices are 802.11"n" models. Your version of the Express is an older 802.11"b/g" model.
This Apple Support document will confirm that you must use 802.11"n" versions to "extend". Notice that the title of document reads Setting Up and Configuring an Extended Network 802.11n:
http://support.apple.com/kb/HT4259
Your friend's Express has likely "joined" the wireless network....a setting which can be used for AirTunes or attaching a remote printer....but his second Express is not providing any additional wireless signal for his network.
You need to purchase two new AirPort Express devices if you want to "extend" your network.

Using express to extend extrene signal, can I use a secont express to extend first express (extending extrene)signal even further

I'm extending the signal of Airport Extreme with an Airport Express. However, I still need to to extend signal even further.
Can I use another Airport Express to extend the signal of the firts Aiport Express even further which is already extending the signal of Airport Extreme?
In other words, Airport Extreme connected to Airport Express extending signal, then another Airport Express extending signal from first Airport Express.

Bob,
Thanks for answer this... I am trying to figure out how to do something in my home and thought you might be able to answer this for me. I have a house that has wired ethernet thruout. I have a dual t1 line coming into a wired router (that provides internet access) going into a switch. Plugged into the switch are all the ethernet lines running thruout the house and a wireless apple time capsule. I have 3 other apple extreme base stations that I want to plug into the wired ethernet connections thruout the house and have all of them use the same base network... Right now when I go thru the wizard it sets them up to connect via the wireless signal, which is great if they are within range of the time capsule, but the second I move one of them to another area of the house that is outside this range, they "appear" to be working (green light) but are actually not connecting to the time capsule, whether or not I plug them into the ethernet jack or not.... I can assign each one of them a separate static IP address that allows each of them to reach the internet but then I will have 4 wireless networks rather than just one... Hopefully, I explained this well... Any suggestions?
Thanks!
Jim

Can I use a second Airport Express unit to printe wirelessly?

I have an Airport Express unit connected to my amplifier and my modem in order to listen to music wirelessly. I would like to use my Cannon ip4300 printer the same way. Can I use a second Airport Express unit to connect the printer to my modem? If so, how is it done? I am concerned about a conflict between the two Airport Express units. Thank you.

I do just this with a ip4200 printer - you "extend" the Airport network with the second Airport then plug the printer into the USB port, (you could plug it into the USB port of the first Airport as well)
In the Airport utility (use 5.6 or 5.6.1) select the Printers tab and it should be there.
Regards,
Shawn

Can i use the airport express in my hotel with wired connection?

I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room. Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S? I'm new to Apple products so will certainly appreciate any info that may help. Thank you!

You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
App Store - AirPort Utility
Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
Power up the AirPort Express and wait 40-45 seconds
Tap Settings, then tap Wi-Fi on the iPad
Tap the AirPort Express under the heading of Set up an AirPort Base Station
AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

Can i use an airport express as an ethernet print server?

here's my situation: i have a belkin wireless g router connected to my cable modem and my G4 desktop connected to the belkin router. i need to access an epson 3000 printer with only an ethernet port in another room in the house. i was told my the tech guy in the local apple store that i could use an airport express to do this but for the life of me i can't make it happen using either airport setup assistant or airport admin utility. so is it possible? and if not, what would you suggest i do so i can access the printer?
thanks.

Can I use an Airport Express as a wired client to an Airport Extreme?
Sure, follow the instructions in this Apple Support document and simply substitute the AirPort Express where you see a second AirPort Extreme:
http://support.apple.com/kb/HT4260

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250?

Can I use Final Cut Express 4.0.1. to import movies from Panasonic VDR-D250 via USB 2.0? How? (page in handbook?)
Further specifications of this older camera:
USB 2.0
DVD-RAM (cannot be inserted in my MBP!)
50-PAL (signal)
MPEG2
Dolby Digital
I want to use FCE if possible but maybe could try to install the software of this camera on Windows virtual XP also on my MBP?

I forward an answer of Panasonic (written in German):
So Panasonic does not offer a software which is compatible with Apple!
Bezug nehmend auf Ihre Anfrage teilen wir Ihnen mit, dass der Camcorder
VDR-D250 die Videoaufnahmen nach dem DVD-Videostandard sowie nach dem
DVD-VR-Standard aufnehmen kann. Wir können jedoch nicht beurteilen ob Ihre
Software Final Cut Express 4.0.1 die Bearbeitung dieser Standards
unterstützt. Seitens Panasonic wird weder eine Apple kompatible software
noch Support für Apple Geräte angeboten. Wenden Sie sich diesbezüglich
bitte an Ihren Apple Händler oder Ihren Computeradministrator. Die
mitgelieferte Software des Camcorders ist ausschließlich für folgende
Betriebssysteme vorgesehen:
- Microsoft Windows 2000 Professional
- Microsoft Windows XP Home Edition
- Microsoft Windows XP Professional
Ob diese Software in einer virtuellen Umgebung genutzt werden kann ist uns
nicht bekannt. Um die mit dem Camcorder aufgenommenen DVDs an einem
Computer-Laufwerk auslesen zu können müssen diese vorab mit dem Camcorder
finalisiert werden. Ausnahme ist die Verwendung einer DVD-RAM.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

I can't seem to find any information anywhere. It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod. Not to mention the Apple "Genius" told him that it should work. However, they also told him that it came with an ethernet, USB and the stereo patch cables...

Can I use the Airport Express as a cable modem?

I am trying to set up wireless internet in my home, and I am planning to purchase an Airport Express. Can I use the Airport Express as a cable modem, or do I have to purchase a modem from the ISP and then connect the AE to the output of the cable modem?
Thanks,
Adrian

No, the AirPort base stations do not perform the functions of a DSL or cable modem, so you will still need to acquire one.

Can i use a second express to increase my signal

Similar Messages

Maybe you are looking for