Can I use a SH6868 cable with NI6034E or NI6024E cards and my BNC2090

I have got a BNC2090 and a SH6868 cable, I want to buy NI6034E or NI6024E cards. Can I use the SH6868 cable with NI6034E or NI6024E cards and my BNC2090?
NI Software : LabVIEW version 6.0
NI Hardware : Multifunction DAQ device PCI-6034E or NI6024E
Driver Version : NI-DAQ 6.8
OS : Windows 98

Greetings,
The SH68-68-EP cable has been optimized for use with E Series devices. This optimization revolves around the configurations of the twisted pairs. Thus, the SH68-68-EP is the recommended cable for your setup. However, the SH6868 will function correctly. This cable is intended to be used with NI 435x devices.
SH68-68-EP Product Page
Good luck with your application.
Spencer S.

Similar Messages

  • Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

    Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

    If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

  • I am planning to buy an iphone 4s in saudi arabia. can i use it in India with a different sim card?

    I am planning to buy an iphone 4 or 4s in saudi arabia. can i use it in India with a different sim card? plz reply

    Yep, but you won't have any warranty or support for this phone in India, nor will you have FaceTime. FaceTime has been permanently removed from all iPhones purchased from official sources in Saudi Arabia.

  • I have an iPhone 4 (CDMA) that is unlocked, can I use this in Europe with a European SIM card?

    I have an iPhone 4 (CDMA) that is unlocked, can I use this in Europe with a European SIM card?

    An iPhone 4 CDMA is CDMA only. It doesn't have any GSM circuitry and doesn't have a SIM slot. You can only use it on the network it was originally sold for.

  • Can I use my iPod cable with my Iphone 4s?

    Does anyone know if it is ok to use an iPod cable with and iPhone 4s?

    Yes. Their USB cables are identical.

  • Can i use my android phone with app store gift card

    can i use my android phone with app store gift card

    Not with a gift card for the iTunes Store, anyway. Apps from the iTunes Store are for Apple's devices only. If you have a gift card for Google's app store, that would be a different matter.
    Regards.

  • Can I use SH68-68S cable with PXI-4351?

    I'm trying to figure out which cables are actually compatible with PXI-4351 and TC-2190
    Will a SH68-68S work?
    thanks!

    Hey Grocket,
    I apologize for the delay in any response.
    It appears that the TC 2190 is only compatible with the SH68-68 cable. The product manual only suggests using that cable.
    The SH68-68-S is only compatible with TBX-68S, CB-68LP, and NI 2501/NI 2503.
    Let us know if there is anything else we can clarify for you!
    Happy Holidays! 
    J Newk
    Systems Engineer
    National Instruments

  • If i buy a sim-free iphone 5s in America, can i use it in China with a Chinese sim card?

    i've bought a sim-free iphone 5s  in apple store in America but i am worried that i cannot use it with a Chinese sim card. Can someone help me?
    Thank you very much!

    The iPhone is sold as "unlocked and contract-free" when purchasing that option from the Apple Store, though Apple's verbiage is using "unlocked" and "SIM-free" rather interchangeably:
    The unlocked iPhone includes all the features of iPhone but without a wireless contract commitment. You can activate and use the unlocked iPhone on the supported GSM wireless network of your choice, such as AT&T or T-Mobile in the United States. The unlocked iPhone will not work with CDMA-based carriers, including Sprint and Verizon Wireless.
    If you don’t want a multiyear service contract, or if you prefer to use a local carrier when traveling abroad, the unlocked iPhone is the best choice. If you choose T-Mobile, your iPhone comes with a T-Mobile SIM card already installed. You will need to contact T-Mobile or visit an Apple Retail Store to activate your iPhone.
    Otherwise, the unlocked iPhone does not come with a micro-SIM card for iPhone 4s, or a nano-SIM card for iPhone 5c or iPhone 5s so you’ll need to get one from any supported GSM carrier worldwide. To start using your iPhone, simply insert the SIM card into the slot and turn on iPhone by pressing and holding the On/Off button for a few seconds. Then follow the onscreen instructions to set up your iPhone.
    Purchasing an unlocked iPhone means you will not qualify for the lower iPhone price associated with a contract. The unlocked iPhone 5c model is A1532 (GSM). The unlocked iPhone 5s model is A1533 (GSM).
    To help decide whether the locked or unlocked option is right for you, compare wireless service plans. Or call our iPhone Specialists at 1-800-MY-APPLE.
    Be aware that if you purchase an iPhone in the US, that will be the only place you will get support from Apple should you need it. You will not get any support for a US-sold iPhone in China.
    Regards.

  • I brought my iphone in Thainland. Can I use it in Paris with a Paris sim card company?

    I brought my iphone in Thainland. I"ll be going to Paris, France, next week and I would love have a phone with internet capablility.
    Can I use my Iphone from Thialand in Paris with a Paris sim card company?

    See above From what I can see the Thai carriers lock their iPhones and do not unlock
    If it came from direct from Apple in Thailand  then it should be unlocked
    Borrow a sim from a different carrier to yours and see if it gives service

  • Can I use Dell printer cable with a HP printer?

    Hi all I'm a newbie here. I'm thinking of getting a HP Photosmart C4680 All-in-One Printer and I know that it doesn't come with a printer cable, does anyone know if I can use my Dell printer cable? It's not a permanent cable. Thanks for any help.
    This question was solved.
    View Solution.

    AS long as it is a USB cable then it will be ok!!!!!!!!1

  • Can I use a PCI-1424 with a non-standard camera and build my own camera file?

    I want to test a certain CCD which in non-standard and I want to setup the direct interface with it. My idea is to use a 1424 board and build the camera file.

    Technically, you can build your own cable and ICD (configuration) file for your camera. It can be very difficult, though. If the CCD is fairly standard, NI might be willing to create a basic ICD file for you which you can modify to do what you want. The best way to figure out what can be done in an ICD file is to look at ICD files for other cameras.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • How can I use an external display with my MBP lid closed and disconnected to power?

    I know that I can use an external display when my MBP lid is closed and it is connected to power. I was wondering why it does not work when the power cable is removed.
    I only use an external display when I am at home so my MBP acts like a Mac Pro or Mac Mini in that way, but it is not good to leave the battery charging constantly on a MBP so I want to disconnect the power and use external display and have the lid closed. Is this possible or do I have to leave my lid open when running on battery power?

    I'm plugged into my wall socket at least 90% of the time - probably more. I always make sure that I take my MBP off mains about once every two weeks and let it run down to about 30-40% and then plug it back up. This keeps the ions flowing and the battery healthy. My MBP will be one year old on March 20, 2013, and my battery health is still at 99%. I run in clamshell mode most of the time now - since I bought a 27" Apple Thunderbolt Display. Only occasionally am I off mains - and then because I'm exercising my battery, usually.
    Don't worry about running of mains most of the time - just be sure and unplug about once every two weeks (or twice a month) and let your battery dip to the 30-40% mark and you'll be fine.
    Good luck,
    Clinton

  • How can I use hp smart print with win 7 64 bit and ie11

    Is there a way for HP Smart Print 2.7 to work with Windows 7 64-bit  IE 11?

    Hi,
    Unfortunately HP Smart Print software  is only supported for Internet Explorer versions 6 through 9. No more development after that.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I use the HP 4630 with both the USB Connection and Wireless at the same time?

    Setup the HP 4630 and the wireless connection from the laptop works fine, but the USB connection on the desktop won't print.
    The printer is recognized and says it is online. When I unplugged the USB the priner status went to off-line, plugged it back in and said it was ready. Tried to print the test page and nothing. Tried to print from Word and nothing. Rebooted and shut down the printer. After reboot gat the same issue. Any suggestions?

    Write to a local variable of the textbox.

  • Can I use my iPad charger with my iphone

    Can I use my iPad charger with my iPhone.

    Yes, charger and cable, if the cable is a lightning cable.

Maybe you are looking for

  • Seagate external USB harddrive

    i just purchased a Seagate external USB harddrive. in the manual, they say they do not recommend using the HD "to share data between windows and macintosh operating systems". they say i should initialize it for a Mac OS. i did see a post here that sa

  • Unable to see empty reporting role folders

    Hi all, I am facing an issue where the Reporting Roles containing the empty folders aren't visible in Bex.. I want to create a query and assign it to the newly created folder. But the folder is empty as  of now, and hence not visible when i try to sa

  • How to open Multiple session

    I am trying to OPEN multiple SESSION for same application and unable to do this using FIREFOX 7.01 R 12(Oracle E-Business Suite), we are using FIREFOX for several clients to open the applciation. But i cannot open different session of same applcaitio

  • Can't install Photoshop Elements 8

    When I'm trying to install it, I recieve a flag saying  "uninstall previus version". I don't have any to uninstall. Any clue?

  • Include third-party static html

    I need to include third-party html content in CQ component(throught url). The third-party html is updated regularly. What is the best practice to do this in CQ? Should I put down the html and cache it in CRX with a job and load the content in CQ comp