Can I use a single +15V supply for SCC-AI06?

I only need to monitor/amplify positive voltages for my current test setup. Is it necessary to run a +/-15V supply, or can I simply supply +15V only and gnd the -15V? Also are there a range of supply voltages that will work, or does it have to be exactly 15V?

Hello,
What +15V, -15V are you talking about?
You should not be supplying any power to the SCC-AI06.
Whether or not you need to supply external power to your SC Carrier depends on what power module you have, what DAQ device you are cabling to, and what SCC modules you are using. If you are only doing analog inputs, then you might not need to supply any power to the SC Carrier at all. In this case you should be using SCC-PWR01.
To find out whether you will need an external power supply (Using SCC-PWR02 or SCC-PWR03), check out the power requirements sections of the users manual:
SC-2345/2350 Carrier User Manual
http://www.ni.com/pdf/manuals/371064c.pdf
-Alan A.

Similar Messages

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • Can I use the same Apple ID for multiple devices

    Can I use the same Apple ID for multiple devices?

    Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
    How to use multiple iPhone, iPad, or iPod devices with one computer
    Using More than One iDevice on the Same Computer
    This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
    On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
    Start by transferring the new device(s) to a new account along with all your data.  Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
    If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
    Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted.  Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
    Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
    Note: The essence of the above was created by user, randers4. I
    have made substantial changes to improve readability and syntax.

  • How can I use my external hard drive for my iphoto instead of my mac book pro memory?

    i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?

    Where can I buy a replacement power supply for Optiplex 9020 Mini Tower?
    I don't see anywhere on Dell's website to purchase this.

    So far there is no replacement/upgrade PSU for Dell Optiplex 9020 MT from Dell.
    Will a dedicated power supply work for playing games? i bought this system as used (excellent condition) just for Gaming Purpose (GTA V), now i am stuck with the PSU issue. I can alter the case to fit the big size GPUs, but the issue is of PSU.
    Will ePower EP-450CD can help me in any way. 
    My main reason for changing PSU is to play my favorite game.
    Link to ePower ()
    or

  • Can I use one Business Partner repository for Vendor and Customer?

    Can I use one Business Partner repository for Vendor and Customer? or do we have to use Vendor and Customer Repository separately. How can we do that? What are the pros and cons? can any one provide some examples:

    Hi Deepak
    The key purpose of SAP "enabling" the facility of multiple main tables in a repository is to primarily "manage" those master data objects that are related to each other. Typical examples will be a) Customer - Material, b) Supplier - Material, etc.
    While, it is pretty easy to add multiple main tables in a repository, it is also important to understand the purpose of doing so based on the business requirements.
    Besides, you got to be aware that in case you are "fixing" any issues with one main table (master data object) for which you have to unload the repository, the users will not be able to use the repository that has a main table defined for other master data object. Hence, there are pros and cons of using this capability of multiple main tables.
    So, it is really important to understand the "W's" - What, Why, When, Where, Who of Data modeling before actually working on the "H" - How to in the SAP MDM tool.
    Hope this helps.
    Regards
    Neelesh

  • SAP ME - Can you use a single MSSQL instance on a single server?

    Hi,
    We need to build a demo system with the minimum of hardware so would like to use just one server.
    The build would be Netweaver 7.4, ME 15 & MII 15 Using SQL 2012 as the database.
    The question is, can I use a single instance of SQL or do I need to install two ? One for netweaver and one for ME ?
    The ME database install guide states the following warning:
    CAUTION
    SAP ME does not use the same collation as the SAP NetWeaver database and server. Do
    not use the SQL4SAP.vbs provided with MSSQL software to install the SQL Server database
    software.
    Does this mean I would install one instance for Netweaver using SQL4SAP.vbs and a second one (using a different port number) for ME using the standard installer ?
    Or can I install just one database engine instance and configure the collation for each database individually ?
    Also what about any of the other settings, eg Filestream and the XA install ?
    Thanks for any guide that you can give.
    Kevin

    Hi Kevin,
    We have this exact scenario on one of our internal sandboxes. Install a single SQLServer 2012 (we installed Enterprise version) instance and create the NW, ME WIP, ME ODS, and ME GODS databases separately, with different collations. We also have XA configured on the server, don't know about Filestream.
    We are running a 2 CPU 8GB VM instance, I would recommend at least 12GB as 8 is minimal.
    Regards, Steve

  • Can I use Creative Cloud Photography Plan for commercial purpose?

    I own small company and we have some basic use of Photoshop. I am planning to buy creative cloud photography plan. Can I use creative cloud photography plan for commercial purpose?

    By using it for your own profession to be used only by you, you can choose between any option but to get the CC used by your staff or other member of the organisation, Team needs to be used.
    If you are using the retail for your own profession then you get 20GB or 2gb as per the individual plan purchased where as CCT with single seat with provide you access with 100GB of storage space.
    Regards
    Rajshree

  • TS3367 can i use a single apple id and facetime between imac and ipad

    can i use a single apple id and facetime between imac and ipad?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Can i use a single ended encoder with a 7344 controller?

    Can i use a single ended encoder with a 7344 controller?

    The encoder inputs of the 7344 are ground referenced. So the answer is yes, you can use a single ended encoder with a 7344 controller. Signal connection should be straight forward.
    If you are using a UMI-7764 for signal connections please refer to the "Encoder Terminal Block" section (page 15) of the UMI User Guide. There are drawings for the signal connections for single ended and differential encoders.
    For the case that you don't have the user guide of the UMI-7764 please download it from this link:
    http://digital.ni.com/manuals.nsf/websearch/AC6FAA69218C9624862567BD0061DDAC?OpenDocument&node=132100_US
    Best regards,
    Jochen Klier
    Applications Engineering Group Leader
    National Instruments Germany GmbH

  • Can I use the old power supply with the new unit?

    I have a second generation Apple TV. When I install the new unit next week can I use the old power supply with the new one and the new power supply with the old one? This would save some messing with cords behind the units.

    Hello:
    I would definitely not try that.....  The power supplies may be compatible - or may not be compatible.  I think messing with cables is a small price to pay for not potentially frying a new device.
    Barry

  • Can i use the one apple id for my iphone

    Can i use the one apple id for my iphone & ipad...is there any demerrits to this

    what if i dont wanna use the same id.....
    sorry to be direct & asking you my ?
    Whenever i downlaod an app OR game ...it will NOT be shared on my wifes iphone4s..correct
    but when ever i take a pic from my ipad...will it be shared thru icloud....i want it to be shared (only pics)

  • I have a Verizon and At&t Iphone 4 can I use the same Itunes account for both phones?

    I have a Verizon Iphone 4 though my job.  I also have a At&t Iphone 4 for my personal phone.  Can I use the same Itunes account for both phone or will I need a separate account for Verizon Iphone?

    I dont live in US, live in Japan.. but I do have 2 iPhones, one 3GS and one 4. I use same iTunes Account on both.
    You might have a little "problem" if your payment were by Credit Card, everytime you try to buy something (I mean, try to download something on your iphone, not from your computer) , your going to need to verify your payment... but if u use iTunes Gift Card, you wont have any problem with that
    sry about my english... I hope I helped you

  • Can I use the same iTunes account for 2 iPads without having the same apps on both?

    Can I use the same iTunes account for 2 iPads without having the same apps on both? Everytime I try to sync my new iPad, it syncs all the apps that are on my account. If I can do this, can someone tell me how please???

    Yes you can, easily.  When you plug the first pad in to sync, note the name of the pad on the last pane.  Set up for that device whatever you want to sync.  When you are done, plug the second pad in.  Make sure it has a different name on the left pane.   Then sync to that pad whatever you want.  I tunes will remember what you did on each pad, and will start from there the next time you plug in.

  • HT204053 Can you use the same Apple ID for two devices ?

    I have an MacPro and I am buying an iPad.  Can you use the same Apple ID for two devices or should I create an new AppleID for the ipad?

    Welcome to Apple Support Communities
    The Apple ID purpose is to have the same data in all your devices and share your purchases among all your devices, so you can use your Apple ID in both devices

Maybe you are looking for

  • Library Is Gone!

    I've seen this question asked before, and nobody has come up with an answer. My iTunes updated and now all my music, movies, and tv shows are gone. I've changed the source folder in my "preferences" option and nothing has come up. I have over 12,000

  • ALE Error For GLMAST

    While processing inbound IDoc's for GLMAST, we get the following error: Message No. FH 511 - The data contains error, you cannot save. It has error ststus 51 - Application document not posted. We are on my SAP ERP 2004 Any help !!

  • Beasvc fails to start, a solution

    I had a problem in starting WebLogic Server as a Windows service. The service didn't start and reported the message "The service did not report an error". All the parameters of WebLogic Server were correct, so the problem was elsewhere. The problem w

  • Want to set up gmail in "Mail Applicaton"

    I had gmail set up as an additional account in Apple mail but somehow it will not work now. I get the following message. "Connection Failed There may be a problem with the mail server or network. Check the settings for account "Gmail" or try again. T

  • Dragged Regions in Main Window Yank Leftward

    I"m finding that when I drag a region down or up from track to track in the Main window of Logic Pro , the region yanks off to the left of its grid line slightly instead of going straight down. I have both Limit Dragging preference checkboxes checked