Can I use a Time Capsule to extend my wireless network.

Hi, I have just bought a 3TB time capsule as my old (flat style) 500GB TC is reaching full capacity. The old style TC will then be surplus to requirements as a data storage unit, at least for myself, though it might be useful for my son to use as his Time Capsule.
Ideally, as we have a wireless 'blind spot' out in the rear extension of the house, it would be useful to use the unit to extend my wireless network (and also use it as a separate TC if possible). Is this possible? If it is how would I go about it?
Hope someone can help . . . .
Cheers
John

Is it possible for you to consider connecting the Time Capsules together using a wired Ethernet connection?
Here is what Apple has to say in their support document about extending:
Adding Wi-Fi base stations when it is unnecessary can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead. The network configuration also becomes more complex. In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device. The general rule is to keep the Wi-Fi network as simple as possible. You can accomplish this by using the minimum number of Wi-Fi base stations required to service the physical network area and by using Ethernet wherever possible.
Extending the range of your Wi-Fi network by connecting Wi-Fi base stations together using Ethernet is always the best option, and will provide the best throughput.
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

Similar Messages

Can I use my Time Capsule to extend a current network? If so, How?

Can I use my Time Capsule to extend a current network? If so, How?

I want to use it wirelessly to extend the range of the network. I currently have an xfinity router as the main.
You may not have understood what I was trying to say above.
If you want the Time Capsule to extend wirelessly, then you must have an Apple router as your "main" router.
You have an xfinity router. You cannot use the Time Capsule to extend the range of an xfinity router wirelessly.

Can I use my Time Capsule to set up multiple networks, or just one?

Can I use my Time Capsule to set up multiple networks, or just one? We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

Two big IFs here.
Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule. it's on the bottom of the device.....starts with an "A" followed by four numbers.
Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature.
Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers. If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
cheers
jadidev

Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
Yes, if you have an Apple router.
No, if you have a BT router.
IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router.
Neighbour's wireless Router = Time Capsule = My Macbook
If I can please tell me how to set this up in details please. thanks for your time.
Message was edited by: Thomas Pink

You are trying to set up the Time Capsule as a Wireless Router
and Repeater? - To share an existing wireless network, wireless?
The AirPort Extreme was capable of repeating (like a transceiver)
to and from an existing wireless network, to expand upon it; but
only did this with another AirPort product, such as an Express.
The Time Capsule and many of its features are outlined here, with more
information: AirPort + Time Capsule: http://www.apple.com/support/airport/
You may have to direct your question regarding expanding an existing
wireless network, to the Discussions section for the specific products.
Usually, the "extend a network" wireless feature in the software setup
only applies to the use of a second Apple AirPort-type base station;
such as the Extreme, Express, etc. The compatibility is between the
AirPort-like Apple products; but a bridge could be made if an Express
were attached to the other wireless network via Ethernet cable, then
the Time Capsule may be able to see it. This would require testing.
Apple - Support - Discussions - AirPort (+ Time Capsule)
http://discussions.apple.com/category.jspa?categoryID=140
Good luck & happy computing!

Using Time Capsule to extend a wireless network

I have an office in the top of my house (2nd floor roof conversion) and as a result the wireless signal from the ground floor is very weak. i would like to boost the signal using my Time Capsule, placing it on the 1st floor, shortening the distance the signal has to travel.
Is this possible? In the AirPort settings I can seen an option to 'extend a wireless network using an ethernet cable' but if that is the only option I may as well just move my wireless home hub to the 1st floor.
Can the network be extended wirelessly?
many thanks!

Thanks for the clarification.
Unfortunately, the "extend a wireless network" feature of the AirPort Express is only compatible with an Apple base station.
Therefore, you will not be able to use the TC to extend the wireless network that has been created by the BT Home Hub. You might check to see if BT offers an "extension device" or "remote" that would allow you to expand your wireless signal.
The TC will need to be configured to "Join" the wireless network that you have there.

Can I use my airport express to extend a wireless network with a non-apple router?

I have been trying to extend my wireless network in my house. Right now I have a dsl modem/router provided by Century Link and an older AirPort express (not sure how old but it uses AirPort utility v5.6). I want to be able to share my printer and use AirTunes. Currently I have the AirPort plugged into the router and setup to create a new wireless network. I would like to combine them so I don't have to switch between to print and play music. I am not really sure where to start or if it even possible. Any info would be great!

If you keep the Express connected using Ethernet and configure the Express to "Create a wireless network" using exactly the same wireless network name, exact same wireless security and same wireless password as the Century Link network.....everything will behave as one "big" network, and you will have additional wireless coverage near the Express.
If you do not need extra wireless coverage, you can turn off the wireless on the Express.
The Express must be in Bridge Mode.
Most users know the name of their wireless network and password, so the really tricky part of doing this is that you must know exactly what type of wireless security settings the Century Link router is using....and then match up the same settings on the AirPort Express.
If the settings do not match up exactly, then you wind up with two separate networks that will each require their own log on.
If you can check the setting for wireless security on the Century Link router and provide that information to us, we can tell you how to set things up the way that you would like.

When I change the setting on my third generation time capsule to "extend a wireless network", the update fails. Why?

I purchased a new router. Everything is working great except for a third-generation time capsule which will not accept a change from join a wireless network to extend a wireless network as it did before. Does anyone know how to fix that?

You cannot extend a non-apple router..
So what new router did you buy?? If it don't have an Apple Symbol on it.. it aint gonna work.

Using a Time Capsule to extend an airport network

I'm making plans to replace my aging (6-8 years old) Airport equipment with newer equivalents. My current setup consists of an Airport Express acting as the main router (wired into the ADSL modem and stereo), with an Airport Extreme extending the network in another room (with connected printer). I realise that one would normally use the Extreme as the main unit and extend it with the Express, but logistical reasons (the phone line is right next to the stereo) mean that I need to use the Express as the main unit or else lose the stereo from the network.
Anyway, I plan to replace the Airport Express with a newer Express and replace the Airport Extreme with a Time Capsule. Ideally the network setup would remain the same, with straight swap-outs of the units. However, I have been given conflicting information regarding whether a Time Capsule can or cannot be used to extend a network in this way (ie. whether or not it can be used to extend a network in which the main router is an Airport Express).
Can anyone provide me with a definitive answer to this? Many thanks.

My policy on answering questions is that I never answer one unless I've done it myself to verify.
In addition, you might want to refer to Apple's own Support Document linked below on extending....which anyone working at an Apple Store would have immediate access to with a few clicks at the computer:
Unfortunately, if someone at an Apple Store told you that the Time Capsule could not be used to "extend"......he was just wrong or too lazy to look up the answer, so he made one up. You might want to show him his own support document...and then talk to another sales guy there when you need product information.
Products Affected
AirPort Express 802.11n (1st Generation), AirPort Extreme 802.11n (1st Generation), AirPort Extreme 802.11n (3rd Generation), Time Capsule 802.11n (1st Generation), Time Capsule 802.11n (2nd Generation), Time Capsule 802.11n (3rd Generation)
http://support.apple.com/kb/HT4259
Good luck on your consensus building.

How can I use an airport extreme to extend my wireless network?

I have a Verizon FIOs router with both wireless and ethernet capability. I also have an airport extreme base station, which is currently connected to the Verizon router by Ethernet and provides wireless to a MacBook in a distant room upstairs. Practically, I have two wireless network now. I have two G4 Sawtooth, which do not have wireless PCI card and require ethernet connection for internet. One of them is in the upstairs study room and connected to the Verizon wireless router by Ethernet. The other is in an downstairs room has not wireless connection.
Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network? If so, how do I set up the airport station downstairst? If not, I know that I have get a PCI wifi for the Sawtooth downstairs.
Your advice is greatly appreciated.
Robert

Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

Can I use my Time Capsule as a External Hard Drive (through Ethernet) ONLY?

Here is my situation:
I am a college student and have been using my Time Capsule to create a wireless network (or extend a previous one) and also to store my iTunes library content (kind of like a wireless hard drive). I just moved into a new apartment and they already have a wireless network and it works just fine how it is. I know that I can extend the network through my Time Capsule (wirelessly because I don't have a long enough ethernet cord to connect into the existing modem), but I don't need/want to because it would just add another path of access for data to go through. I don't mind just having my computer connect wirelessly to the existing wireless router rather than sending it wirelessly through the Time Capsule which would then just need to send the data to the existing router. It just seems like it would make things slower and I don't want to even deal with it. I hope that makes sense.
This is what I want to do and I'm wondering if it is possible and if so how to do it. First, I want my computer to be connected to the current wireless network (as if I didn't even have a TIme Capsule extending the network) so I can access the internet BUT SECOND, I want to access the iTunes library content I have saved on the Time Capsule through a direct ethernet connection. I have too much content (i.e. movies, music...etc) to be able to save it all on my laptop and so that is why it is on the Time Capsule. So simply, if the Time Capsule is plugged into my laptop, can I have it so it ONLY acts like a normal ethernet connected external hard drive?

TC can be set a number of different ways.. Just run it as a router for now.. ie exactly at default.. The fact that you don't have WAN address or connection is irrelevant.. we can tell the TC to ignore the problem. At default the TC is 10.0.1.1
The only issue you can have is if the wireless network is also 10.0.x.x. if it is change the IP of the TC to 192.168.10.1 (or whatever you like.. as long as it isn't the same).
Use static IP settings for the network in the Mac.. you can use exactly the same IP and subnet the TC passed by dhcp. Just no router (gateway) or dns.. so as to not confuse the main network.
You seem to be worrying to much about getting everything right..
Start.. learn.. it is faster to do it and see what happens.. than keep asking questions.
If you run into a snag disconnect the TC.. or reset to default and ask the specific question.

How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
Thanks!

The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

Can I use 2 Time Capsules on the same network

Can I use 2 Time Capsules on the same network
Posted: Jul 23, 2009 1:49 PM Reply Email
Here is what I want to do. I currently have a time capsule used for one end of the house. Currently my 2 kids rooms are in an addition that I have run a cable from the time capsule to each of their rooms. If I want to give them wireless for that part of the house could I add another TC, for wireless and they can both backup their macbooks to that time capsule.
So Can I add a 2nd time capsule to extend by "N" network, or should I just go with an AP express or extreme and let them each have their own HD backup for each macbook?
Brett

Have bought many reconditioned (Refurb) product from Apple site and have always been happy with them. To date none have failed me and we have been Apple customers since 2006. With that said when you buy Refurbs make sure you know what model you are getting. The current TCs on the Apple site are last generation. The way to tell is to check the model number against the current one. Easy way to do this is to put both in the shopping cart and compare the model numbers. The Refurb model number is FB277LL/A and the new TC model is MB765LL/A. The first digits identify whether a Refurb or new, the rest should be the same if they are the same model number.
Before you buy, now which model number you want and then check other sites to compare prices. I recently purchased a new TC on Amazon for a better price then the Apple Store Site. For larger Refurb purchases like MBPs, we choose to buy directly from Apple; but for peripherals we often buy from OWC, Amazon, and other sites. Hope this helps.

Using a time capsule to extend a fios router?

I know this topic has been covered many times, but I seem to have trouble finding my answer to my exact questions. I have verizon fios wireless router that they provided with the service. We have a large house with the fios router at one end. At the opposite end, the signal is very weak. I want to use my time capsule to extend the network to the other end of the house. Is this possible without connecting a long ethernet cord and placing the TC at the other end of the house. My ideal situation would be to plug the TC into the wall at opposite end of the house of the Fios router and have it connect to the Fios router and extend the wireless connection...is this possible? If not, can someone please solve my problem?

I just turned the wifi setting of my fios router off and plugged it directly into the time capsule. If I had a large house like yours, I would look at something like this:
http://www.engadget.com/2011/06/08/netgears-universal-wifi-range-extender-now-av ailable-for-baldin/

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

Can I use a Time Capsule to extend my wireless network.

Similar Messages

Maybe you are looking for