Can I use a TIme Machine drive of my Macbook to transfer data to a new IMac

Hi everyone
I currently have a 2.6GHz Intel Core 2 Duo Macbook Pro as my main machine, using System 10.6.4.
I'm keen add a second computer which will allow me to run both systems at the same time.
My day job is a music producer, so I have plenty of audio programmes and plug ins, that are all intel spec and up to date, so I'm aware of tranferring new password codes etc to a new hard drive however I wondered if there were any potential issues transferring the data from my Macbook Pro and or it's Time Machine Drive to a new iMac ? I'm guessing not as they are both Intel Machines and will be running the same operating system, but any guidance to re-assure me would be greatfully received.
Many thanks in advance to any replies.
Robert

I wouldn't use Migration Assistant for anything but to transfer your Home folder assuming you wanted to operate out of the same account on both machines. That's certainly the easiest approach. It's what i do between my Mac Pro and my MBP.
But Migration Assistant is not a tool for maintaining synchronization between two computers. For that you can either have the two computers on the same local network and sync them over the network with third-party software. Or you can maintain an external "common" backup that is used to keep the two computers up to date using third-party software.
My choice is the common backup on an external hard drive. I use a notebook sized drive because it's easy to take with me when I travel. I backup the most recently changed computer to the external drive. Then connect it to the other computer and do an incremental update. This keeps both computers in sync. You just need to remember which was the most recently changed computer.
If you have a local network, then when both computers are connected to the network you can enable File Sharing on one of the computers, then sync the two with third-party software.
Backup Software Recommendations
1. Retrospect Desktop (Commercial)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
9. SilverKeeper 2.0 (Freeware)
10. MimMac (Commercial)
11. Tri-Backup (Commercial)
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Similar Messages

Can i use my time machine backup of my macbook pro for my iMac?

its a new imac and i'm wondering if i can use time machine to get my imac where my macbook is...like mirror everything thats on my macbook.
hope that makes sense.
jon

Use Migration Assistant on your new iMac and select "Time machine or other backup disk" as the source.
Migration Assistant is in your Utilities folder.

I had to restore my 2006 MacBook Pro back to factory settings (Tiger 10.4). Can I use my Time Machine back up from Snow Leopard to put it back the way it was?

I cannot locate my Snow Leopard disks but I was able to use the Tiger disk that came with the computer to restore it. However, it completely erased it and set it back to Tiger. Can I use my Time Machine to put Snow Leopard and my data back on the computer?

You can't restore a Time Machine backup made with Snow Leopard onto a system with Tiger. You can, but you will damage Mac OS X.
In order to restore your Time Machine backup, you should have your Snow Leopard disc. Then, insert it and hold the C key while your MacBook Pro is starting. Finally, choose your language, go to Utilities menu (on the menu bar), choose the option to restore the backup and follow its steps, so you will recover Mac OS X Snow Leopard

Since I updated to iPhoto 9.5.1, my library is not listed or available. How can I find it? Can I use the time machine to restore it?

Since I updated to iPhoto 9.5.1, when I open the program, I am now asked what library i wish to use and none are listed. I can not find my photos. How can I find and restore my photos. Can I use the Time Machine to do this?

You may be launching an older version of iPhoto from your Dock. Try to launch iPhoto directly from the Applications folder. Does that find a library to open?
If not, search with Find Any File for traces of your iPhoto library, as described by Old Toad in this post:
Re: My iPhoto Library disappeared...how do I get it back?
Download and run Find Any File to search for a file with "ThumbJPGSegment" in the file name. These are files common to all versions of iPhoto libraries.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. If there's a library hiding somewhere on your hard drive FAF will find it.
If that does not work, try to restore from your backup:
The photos were stored on the iMac hard drive. I do have the Time machine with backup on my Airport WIFI.
To restore from Time Machine, you need to open the folder, where your iPhoto library should be, before you enter Time Machine. Then go back in time along the timeline to the right of the TimeTunnel window.

Can I use my time machine backup to migrate my files to macbook pro retina from my macbook pro 15 inch?

I'm using a macbook pro 15 inch mid 2011 running on mountain lion.
I have a complete backup of my files on time machine. If I get a macbook retina, whats the best way ti migrate?
Can I use my time machine to restore to the new retina mac?
Thanks

I'd just use the Time Machine restore function when setting up your new machine. If you don't have the TB>FW adapter, how do you plan to connect to your external drive with your TM backup? You may have to resort to Migration Assistant - but it would be helpful if you had the TB>Ethernet adapter so that you could hardwire both machines to your router - going wireless is going to take a long, long time. If your external has a USB port, you could use that for a TM restore...
Clinton

Can i use the time machine as storage?

how can i use my time machine as storage?

I assume you mean Time Capsule.. that is the physical box that is combined router and hard disk.
Yes, you can, but it is not designed for storage.. it is not a NAS.. it has no easy incremental backups of files stored on it.. and only has a slow usb backup of the whole drive which is painful. The TC is a backup device. Use as storage knowing one day it will die and what then happens to your files???

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

Can I use my Time Machine as an airport to print from my Ipad?

I want to use the airprint, but my printer does not have that utility. I read in another apple support, that I could use a computer as an airport.
Can I use my Time Machine as an airport for the airprint, between my Ipad and my printer?

No. Time Machine is just backup software. If you have a networkable printer that you can connect to the computer then you could possibly print to it wirelessly via your network if you enable printer sharing in your router.

HT201250 My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

My MacBook Pro (using OSX 10.7.5) suddenly can't find the Time Machine backup disk, which is on the harddrive of my desktop iMac. What to do?

Inherit a Backup
Inherit a Backup (2)

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Yes.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

(How) Can I use Existing Time Machine On New Mac Without Erasing Original TM Backups?

I just got through doing a clean install from Mavericks to Yosemite and now I'm trying to attach and recognize the original Time Machine Drive (TMD)
I chose to install as a new computer and did not choose a Time Machine backup option because the original TMD was not attached at the time of installation.
Upon arriving at the desktop and connecting my original TMD, I was able to see it in finder but Time Machine did not automatically accept it.
I am able to see the disk in Time Machine but it doesn't tell me that its got data on it .
HERE'S THE ANXIOUS MOMENT: If I select TMD, which is the original, will it overwrite all that orignal information, or will it continue adding to it?
I've read under different parts of the forum that if you go through this process during the original setup and the Time Machine drive is attached to the computer then you will be prompted to inherit the old Time Machine. Since I didn't have the drive attached, I didn't see that.
Now back to desktop and into the Time Machine utility: This option to inherit doesn't seem to exist or is obvious. The only option after selecting the drive in Time Machine is "Use Disk". If I click this, will it erase my original data or will it ask to inherit the drive? It's not very clear what will happen after I click "Use Disk".
Thanks so much to anyone who can help, Jeff

Thanks for the link. I went there but didn't find any information on how to inherit the backup history. The link says "If you’re replacing an old Mac and want the new Mac to use the backups from the old one, click Inherit Backup." At what point in the migration process does it ask "to specify whether you (I) want a new Mac to inherit a backup"? It seems like I got quite a few levels into Migration assistant and the last click that I did not click seemed like it was good to start the process without telling me anything about inheriting anything.
Any suggestions or did I not go far enough?
From Apple Website below
OS X Yosemite: If you want a new Mac to “inherit” your backup history
You can move the backup history from one Mac to another, but after the new Mac “inherits” the backup history, you can’t use the backup history on the original Mac.
You’re asked to specify whether you want a new Mac to inherit a backup if you do any of the following:
Use Migration Assistant to transfer your settings from an old Mac to a new one.
Use Migration Assistant to transfer your settings from a Time Machine backup of an old Mac to a new one.
Clone the disk you use to start your Mac, or physically move it from an old Mac to a new Mac.
Replace your computer’s main board.
If you’re replacing an old Mac and want the new Mac to use the backups from the old one, click Inherit Backup.
If you plan to continue to use your old Mac, click Create New Backup to preserve the backup history and start separate backups for the new Mac.
Connect a new backup disk to your Mac
Transfer your info from a PC
Last Modified: Nov 18, 2014

HT3275 "The external disk must be erased before it can be used for Time Machine backups because it has an incompatible filesystem." What if I don't want to erase the disk?

I'm trying to use Time Machine on my Macbook (which is a year old) to back up onto a 1Tb external hard drive. I have 860 Gb free on the hard drive. But for some reason Time machine presents me with the statement above. How can I back-up my laptop without clearing out the data I already have on the hard drive?

Time Machine must back up to a hard drive that has been formatted in Mac OS Extended (Journaled). Your drive is likely formatted in FAT 32.
If you want to use the drive for Time Machine backups, you will have to erase it and reformat using Disk Utility on your Mac.
First, move the files that you do not want to lose to another temporary location and test to make sure they are OK.
Second, erase the drive that you want to use for Time Machine backups and format it for Mac OS Extended (Journaled).
Third, move the files back to the hard drive. Test to make sure they are OK. When you are sure that the files are safe, you can erase them from their former "temporary" location. (Although I do wonder how you are backing up these files).
Time Machine will not touch the other files that you have on the hard drive.

Can I move the time machine drive from being a usb drive

Hello
I am not sure whether this fits best in the time capsule or in the time machine forum. I try here as this a issue thar arises only to time capsule users.
I have a new USB drive that I want to use for time machine backups. Eventually I want it to be attached to the time capsule and make the time machine back up via wifi. However the first backup is 261 Gb and this is too long for the wi-fi. I am doing it right now via the USB and take 12 hours (estimated).
After the USB backup will be finished, can I move the drive to the time capsule and let time machine make the backups via wifi? I mean, is time machine going to find the backup done via USB or once started with USB I am stuck with that?
Thanks for answering and for reading
Roberto
PS
maybe was better on the time machine forum, still don't know.

Backup strategy
Backing up a client computer to Time Capsule hardware with Time Machine software via the network provides ample time for contemplation, and rumination as to why the backup is taking so long. An initial 200Gb backup has an estimated time of "3 days" even on a wired network. Incremental backups following the initial backup are also beset with delays, with various message which can be viewed with the programmer's delight, the "Console" app. Otherwise the System Preference Time Machine interface is mute. The glacial pace of the Time Capsule backup process is exhaustively documented on the internet, but with no solutions - at least that I have found any after too many hours searching.
The System Preferences->Time Machine interface is always used to start a backup, monitor, or stop a backup, whether the backup drive is present on the network via Time Capsule, or if the backup drive is directly connected to the client computer.
On the positive side, Time Machine performs quickly and provides hourly backup to external drives directly attached to the client computer. The delay appears in network backups via Time Capsule.
Another positive is that network backups to Time Capsule are reliable when the client computer is stable, always on, and never detached from the network. In this case, the mute interface offered by system preferences->Time Machine is welcome. For example, my Apple Mac Mini web server (always on) is reliably backed up to a Time Capsule.
The negative experience is encountered when backing up a laptop when, as laptops do, the laptop wanders from the network. As stopping a backup can take 15 minutes, backups are necessarily interrupted when dashing off to work with your laptop. In the network where I have experience, there are 5 laptops and 1 stationary (Mac Mini) clients living on an all-Apple network. Failing to complete a backup via network for days on end gives no feeling of security.
Reading from Podini's excellent website
http://pondini.org/TM/Works.html
and extracting a summary, files copied from a client computer using Time Machine are stored on the backup drive in one of two formats: sparse bundle (special file type) when backing up to Time Capsule (or to a drive attached to a Time Capsule), or a folder with the client computer name when the backup drive is Firewire attached to the client. A closer examination of the sparse bundle file on the network with the Finder shows that the same folder appears with the computer name.
So, Time Machine backups always go to a folder with the client computer name, and this folder is either inside a sparse bundle or not depending upon if the backup drive is mounted on the network via TC or directly attached to the client.
An external drive mounted on the network via Time Capsule will create a sparse bundle file for the client or add to it if it already exists. Even if backups are present of the same machine, but not in a sparse bundle, Time Capsule will create a sparse bundle if it does not exist for the current backup client computer, and start a new backup.
An external drive directly connected to the client has a different experience. No Time Capsule is involved. Upon turning on backups via Time Machine, the backups will go to a sparse bundle file with the client computer name, if it exists. If the sparse bundle file does not exist, a folder is created with the computer name.
A strategy of backing up to an external drive moved between various computers and the Time Capsule might resolve some of the many delays. The strategy is simple, if delays are encountered, directly attach the backup drive to the client computer. If a backup is to be manually deleted in order to begin anew, directly attach the backup drive to the client computer before deleting the sparse bundle file.
To begin a new backup with this strategy of "drive+TC", initiate (via TM) the backup on the network (via TC), then stop after 10 minutes (with TM), noting that a sparse bundle of zero size is created. Continue the first backup by directly connecting the external backup drive to the client then pointing Time Machine to the newly connected drive. The backups by way of direct connect will go to the existing sparse bundle. Wait three hours rather than three days for a 200Gb backup to complete. Subsequent backups will go to the sparse bundle file on the backup drive, whether the backup drive is on the network (via TC) or directly connected.
But what of the internal drive on the TC? In this strategy, it is not used for backups unless the client computer is always attached to the network.
With so little documentation from Apple, we are left to speculate as to the cause of TC largo. Normally, slight documentation means little to know for the user, and the user is spared the complex machinations under the hood, but when the operation is flawed the user is left without resources.
A secure backup strategy stores a backup offsite, just in case the house burns down, or buglers make a clean sweep of computers and backup drives. Unfortunately, this means doubling the equipment, including two Time Capsules and two external drives attached to the TCs. The offsite copy is rarely mentioned in the same paragraph as the Time Capsule, likely because of the cost. It's an uncomfortable fact that a sole TC is vulnerable to local hazards, along with the local client computers.
This is the strategy I'm testing now. I'll send an update in a few days.

Can I use a Time Machine restore from an older OS to Mavericks?

I ask because I tried about 2 years ago and had no luck. Here's a little back-story so my situation isn't confusing...
My iMac (2010) has been having tons of issues lately. More specifically, when I attempted to upgrade to Mavericks last week, it came back with S.M.A.R.T. errors after a scan, so it wouldn't allow me to update. So, in preparation for the HDD to crap out on me, I did frequent back-ups using Time Machine. Well, the day finally came and my iMac won't "turn on" anymore. When I turn it on, it sits at the Mac loading screen for several minutes and then just goes to a blank white screen. (NOTE: This isn't part of my question but if anyone has any suggestions on fixing this, please let me know, thanks!)
So, back to my question. If I buy a new iMac or a new macbook or whatever, will it be possible to use my Time Machine back-ups to restore everything on it or will it not allow me to because the operating systems are different? As mentioned, I attempted to make a restore on my friend's macbook that I purchased as a spare but when I tried, it came back saying "Different operating systems, cannot restore" or something to that degree. Is there a way around this? Do I have to somehow downgrade the OS on my new machine?
Luckily, I use iTunes for all my movies/music & Adobe Creative cloud so I can easily restore those on any machine but my desktop personal data, photos, etc are on the Time Machine restore. Help me if you can, thanks in advance!

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. They can also give you an estimate.
Genius Bar Reservation US

Can I use a TIme Machine drive of my Macbook to transfer data to a new IMac

Similar Messages

Maybe you are looking for