Can I use a usb and wireless keyboard at the same time on a mac pro

I wish to use the Mac Pro USB keyboard for Logic shortcuts and the Mac Pro wireless keyboard for normal typing etc. Is this possible?

Just as Matt has said, the Mac uses "all devices active" philosophy with keyboards and pointing devices. It does not automatically Switch to a later-installed device, it uses them ALL at the same time by default.

Similar Messages

Problems with magic mouse and wireless keyboard at the same time

I have a Macbook pro 15" mid 2009, with lion 10.7.3, i bought a magic mouse and small wireless keyboard Apple, but when i'm working with both devices at the same time, the magic mouse begin to do something wrong, the left click work as left click, and i have to turn off the keyboard, wait for a while and then the mouse work good, the keyboard work good alone and mouse too, but at the same time no.
What do you think about rarely issue?
Thanks.

Hello:
Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
Barry

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both

Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both. Want to give one to wife.do I need to open a new iTunes account for her?

bashepard wrote:
Can I use an iPad and a ipad2 with the same iTunes in my computer? I want to use both.
Yes, No problem at all.
Want to give one to wife.do I need to open a new iTunes account for her?
No - you can share the same iTunes account (my wife and I share the same account). But when you sync the iPads, just remember to select the correct content for her iPad and the correct content for your iPad.

How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interruption.

I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi ‏37 KB

Hi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi ‏59 KB
Figure_Algorithm.doc ‏26 KB

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Connecting Micro USB and HDMI cables at the same time

I need to be able to use a Micro USB and HDMI cable at the same time to configure ATV to connect to WPA2-Enterprise secure WiFi network. I'm using Apple Configurator to do this. Because of the poor hardware design, it isn't possible to connect both the Micro USB and HDMI cables at the same time. Does anyone have a worrkaround to resolving this issue?
I saw a similar post about this problem in the forums dating back to April 2013 with no real solution. It's been over a year now and I'm hoping someone has found a workaround to this problem. I have a bunch of ATVs that I need to configure for our classrooms.
Thanks!
MG

For what reason do you believe this is necessary?
How to Install a Configuration Profile: http://support.apple.com/kb/ht5437

Can i run remote profiling and remote debugging at the same time

can i run remote profiling and remote debugging at the same time .
i am using jdev9.0.5 and oc4j9.0.4 standalone server.

i think i am wrong

Can oracle work in shared and dedicated mode at the same time?

Hi All,
can oracle work in shared and dedicated mode at the same time?
Thanks

A database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M-

Can I run a podcast and an app at the same time?

Can I run a podcast and an app at the same time?

Yes for most. You can run a regular app with an audio podcast. I do not know what could run with a video podcast.

On my wireless printer can i use both usb and wireless at the same time

i tried to print from coupons,com but it will not i have used coupons.com before with my other printer and weorked fine i have coupons.com looking into it
just wondering if anyone else out there have the same problem

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Airport express and wireless internet at the same time???

hello,
i recently replaced an airport express that broke. before i replaced it, my house was set-up with my macbook in one room, airport express in the living room and home-internet router in the office.
i dont remember how i did it, but i set it up so that i could be connected to the internet and airport express at the same time. right now, its one or the other. either connect to the airport and listen to music, or connect to the router and get internet...
now, i understand you can do this if u plug an ethernet into the airport express, but its in a different room than the router.
so somehow i need the router and airport to connect to each other wirelessly????????

Configure the AirPort Express (AX) using the instructions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

Using internal Speakers and optical Output at the same time ?

Hello,
is it now possible to use the internal Speakers and optical Output at the same time ?
Is this a software or hardware limitation ?
Every day im disconnecting the optical output. It can't be good for the contacts. I wont spend over 100 euros buying an external soundcard to solve this problem.
Any Ideas ?
Thanks ? best regards
mc
IMAC 24 Intel Mac OS X (10.4.8)

New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...

Can you use 2 sets of bluetooth headphones at the same time with the Ipad 4?

Hi, I was wondering if anyone could tell me if I can use 2 sets of bluetooth headphones at the same time with the Ipad?
It is so my children can watch a film or listen to music together.
Thanks

No

Can I use a usb and wireless keyboard at the same time on a mac pro

Similar Messages

Maybe you are looking for