Can i use a usb camera on a 64G 3G Wi-Fi Gen 1?  If so, can I run Facetime on it?

Can I use a USB external camera on a 64GB 3g wi-fi GEN 1 iPad ?  If so, can I then run Facetime on it?

martian95123 wrote:
Can I use a USB external camera on a 64GB 3g wi-fi GEN 1 iPad ?  If so, can I then run Facetime on it?
No and no.

Similar Messages

  • Can I use a USB camera to import directly live footage into imovie as opposed to firewire?

    Hi!
    I use iMovie to directly import live footage from my camcorder.
    I've been using old Mini DV cameras to do this but this technology is being outdated with camera manufacturers now all moving to USB.
    Can I use a USB camera to take live footage directly into iMovie just the same was as i've been doing with the firewire connection via the old Mini DV camcorders.
    Alternatively, are there any firewire camera's that any could reccomend?
    Any help or suggestions would be greatly appreciated.
    Chris.

    No, you cannot import in real time from USB. These USB camcorders will import faster than real time or slower than real time, depending on the speed of your computer.
    If you need to import in real time, there are some USB webcams out there that are used mainly for video chats and the like that might work. You may find an HD model.You can also do this with your built in iSight camera.
    With a real HD video camcorder, you will need to import it after you shoot.

  • How can I use a USB camera with cRIO 9022. Please see my strange problem.

    Hi,
            I would like to use a USB camera with NI cRIO 9022. I used the same USB camera with NI USB 6216 DAQ device and developed a VI(within a PROJECT and outside it). So, It is working fine with NI USB 6216 device when I use the Vision Assistant Express VI and gets detected in its Initialization Window.  Please see JPEG File 3 where I get NO ERROR.
            I am facing a problem when I want to use it with NI cRIO 9022. What exactly I am doing in this case is:
    1) Create a NEW PROJECT
    2) Add Targets and Devices(NI cRIO 9022)
    3) Use the Scan Interface mode
    4) Create a NEW VI under the cRIO 9022 device 
    5) Use a Timed Loop(Synchronized with Scan Engine) for continuous Data Acquisition and Sending from the Analog I/O modules.
    6) Use the Vision Assistant available through the NI Vision Acquisition 2010 Module(I get STUCK HERE! The Express VI opens the Initialization Window, but I don't see the USB camera like in JPEG File 3)
    I am facing difficulties with this HOST COMPUTER, cRIO implementation differences. On my host computer I have the software packages as shown in JPEG File 1, and on my cRIO 9022 as shown in JPEG File 2.
    Can someone guide me how to overcome this and get the USB camera detected when I am using NI cRIO 9022?
    NOTE: If this is a problem with software mismatches on HOST and NI cRIO 9022 device, please see JPEG Files 1 and 2 for available software and Host and cRIO 9022.
    Thanks.
    Amar.
    Attachments:
    NI Vision Acquisition Express Error for NI cRIO 9022.JPG ‏39 KB
    IMAQ and dx Modules Installed on my NI cRIO 9022 hardware(No NI Vision Acquisition 2010 SP1).JPG ‏82 KB
    NI Vision Acquisition Express NO Error for NI cRIO 9022.JPG ‏48 KB

    Only GigE comms are supported on the cRIO Real Time OS. Have a look at the following:
    Machine Vision on NI CompactRIO and Single-Board RIO
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • Can I use a USB camera with the 3rd party USB camera software and share screens?

    I want to do more than just use a USB camera w/iChat (or ichatusb).  I also need to be able to initiate screen sharing between two computers.  Specifically, I will use iChat with an insight built in camera on my end, and the other person will be using an iMac G5 PPC using a USB camera and the 3rd party USB software for USB ichat support.
    My question then is am I able to request screen sharing (taking over their screen) from my ichat/fw combo to their ichatusb/usb combo?
    thanks
    dc

    Hi,
    The Cameras don't come into this at all.  (But iChat and OS versions do)
    Each end needs iChat 4 or higher.
    Go to the Video menu and Enable Screen Sharing (Selecting toggles a tick On and Off (Tick Present is ON) )
    Highlight Buddy in list and use the Screen Sharing icon at the bottom of the list (interlinked rectangles).
    The G5 could be on Leopard (iChat 4) and be using a  USB 1.1 camera that would need iUSBCam (formerly iChatUSBCam) as well as the Camera manufacturers Software.
    iChat 3 (In Tiger OS 10.4.x) on the G5 with a USB 1.1 camera, Software and iUSBCam may well offer a Screen Sharing option (Or rather Desktop as Video Feed) in the iChat > Video Menu  and that will not work
    However if the G5 has USB 2.0 ports (not the Keyboard additional ports) then if it is up to OS 10.4.9 it can use a UVC Camera for Video Chats  (UVC = USB Video Class No need for Additional Drivers) but Screen Sharing will still be an issue due to the iChat version.
    IF the G5 is still on OS 10.4.x then you will have to use a third Party VNC app at both ends (And run a iChat Audio Chat along side)
    9:33 PM      Friday; September 2, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable?

    Can I use the USB cable that came with my digital camera to conect camera to iPad by connecying the camera cable to the USB end of the iPad cable? I have a double ended USB connector if necessary.

    No.
    You need to use this.
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a
    or this
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a

  • How can I capture/sa​ve video using a USB camera in labview?

    I'm using a USB camera and am able to get it working with the IMAQ USB Grab Example. I'm basically trying to capture the video stream displayed. How would I modify this example to do this? Thanks!

    Have you got "IMAQ AVI" sub-palette?
    Google search "site:ni.com imaq avi"
    found:
    Writing a Compressed AVI File with the IMAQ Vision Acquisition Software

  • Can I use a USB thumb drive with iPad

    Can I use a USB thumb drive with iPad2

    What do you want to do with the thumb drive?
    If for picture/movie files, You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • Connecting my ipad mini to my camera using the USB camera kit error message 'device is to powerful' keeps popping up.

    I am trying to connect my iPad mini to my Samsung camera using the USB camera kit, I keep getting the error message ' device to powerful'. Is there anyway to fix this or do I need to take it back?? The shop assistant in Currys assured me it should work and it wasn't cheap at £25 for a tiny wire! I have read other posts concerning this but they are dated quite a while ago so just wondered what the newest advice was concerning this. Thanks

    The camera is drawing too much power for your iPad. This can happen on cameras which charge their batteries using the USB connection. Make sure that you have the camera set to the correct settings for picture transfer - check the documentation that came with the camera.
    Note that you can return the USB kit and get the SD card adaptor or get a powered USB hub if you can't get the camera to work any other way.

  • I can't see my usb camera (Kodak CX7220)

    Hi,
    The package libgphoto2 (2.1.4-2) does not contain my camera. So, I had to compile the new version (2.1.5) myself. After installed it, I dont know if I have to do something else, but when I run gthumb or gtkam, I still can't see my camera on the list!
    Anyone knows what I have to do?
    Thanks!

    Hi murpheus40.
    First check out the following very recent article about cameras under LInux:
    "Use Your Digital Camera with Linux"
    http://www.linuxdevcenter.com/pub/a/lin … gicam.html
    Now for a few tips:
    1. Check that the USB camera is recognized after it's been plugged in. You can check the devices file:
    cat  /proc/bus/usb/devices
    or you can run usbview (an Arch Linux package).
    2. Even if you can't get gthumb or gtkam to work right now, you can download the files directly using gphot2. This is nicely described in the article referenced above.
    3. You might find that your camera is not well supported by ghoto2. For one of my cameras this meant that the USB connection was lost and it was necessary to replug the camera in to work with additional commands (e.g., doing a complete file list dropped the connection after the listing was complete).
    4. Your camera IS supported by gphoto2. See:
    http://www.gphoto.org/proj/libgphoto2/support.php
    5. The previous tips may not have gotten you to your goal. There's a lot of good information about setting up USB cameras under LInux using gphoto2 at:
    "Digital Camera Support for UNIX, Linux and BSD"
    http://www.teaser.fr/~hfiguiere/linux/digicam.html
    "Configuring a USB digital still camera on Debian"
    http://jace.seacrow.com/tech/linux/usbcam
    "How do I get my USB digital camera to work under Linux?"
    http://www.yak.net/fqa/279.html
    Good luck!
    Win

  • Can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    can I use an USB disc with my macbook pro bought in 2005.  What capacity will it take 2.00 or 3.00?

    The first MacBook Pro's were not released until the beginning of 2006, and they had USB 2 ports.
    Anything available new in 2005 would have been a PowerBook G4 and they also had USB 2 ports.
    A USB 3 disk will just transfer data slower then it could do, if you plug it into a USB 2 port though, so you can buy either.

  • Can I use a usb thumb drive for Time Machine?

    Can I use a usb thumb drive for Time Machine backups?

    Hello,
    Yes you can use a (large) thumb drive. The most common format for a Time Machine backup drive is Mac OS Extended (Journaled).
    Hope this will help.

  • Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    That's not possible, it was designed to handle one device at a time. 
    I don't work for Cisco. I'm just here to help.

  • Can I use a usb external hard drive larger than 2TB?  I have tried to use a 3TB but it shows up as 800GB.

    Can I use a usb external hard drive larger than 2TB?  I have tried to use a 3TB but it shows up as 800GB.  Even tred to reformat in disk utility but only shows as 800 gb as well.  It is a Seagate 3TB harddrive and enclosure.  Nothing on the Seagate site about it other than it says Mac os through 10.6 is supported  for larger than 2TB (might be old).

    You might have better luck in the Snow Leopard community. I'll ask the hosts to relocate your post.
    10.6 Snow Leopard

  • HT201300 I am very new to MacBook Pro.  Can I use a usb flash drive?

    I'm very new to Mac. Can I use a usb flash drive?

    Yes.
    USB Flash
    SD Card Flash.
    http://www.tuaw.com/2011/09/19/mac-101-format-choices-for-usb-flash-drives/
    http://support.apple.com/kb/ht3553
    MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.4

  • Can i use a usb like 3g usb on the airpot

    Can i use a usb internet to connect two laptops at once through a 3g usb or a usb system thats found in africa juz plug and use but can use it on airport exterme and then connect two laptops at once and even tke out the usb and crry it around when i wont : usb found in africa:http://www.mtl.mw/phonesandaccessories.html

    Sorry - I have no experience or knowledge to give you a direct answer.
    The specs for the EC506 show it has a maximum data rate comparable to what a basic DSL broadband connection provides in Europe or North America. If that spec is true under "real world" conditions in Africa, the connection would be pretty good.

Maybe you are looking for

  • Plz help me to find out tables and fields........based on SD,PM,FICO Module

    Hi plz help me to find out the table name and field names as i am unable to find .....In the spec am given requirements in the following pattern. Description          SAP-Term                                       Explaination 1.Salesman        Equip

  • Problem with ichat 3.1.9 and os 10.4.11 and aim logon for a/v chats

    Hello all. Please help. I have been trying to help a family member with their mac laptop, os tiger 10.4.11 and ichat 3.0. When trying to logon to start an a/v chat with anyone the program keeps defaulting to AIM. We have repeatedly deleted the "com.a

  • Connecting my PDA (WM6.1) to my laptop for activesync

    I am using HTC Touch Diamond2 and trying to connect to PC using Vista+ Windows Mobile Device Center I have try following the setting listed in the page below, but when I am trying to do "Now the remote PC will be queried whether ActiveSync is running

  • Problems installing ISE Design Suite 14.7

    I try to download ISE Design Suite - 14.7 Full Product Installation. After a couple of hours the file is downloaded. After that i unzip the file and start the installation from bin\xsetup.exe The installation wizard starts and after a couple of secon

  • Calling Standard Method of Object

    Dear All,      I had requirement to call standard method 'CANCEL' of Object(MOVEINDOC) in abap program.But the problem is that the method is not released.How can i call this method in abap program.