Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

That's not possible, it was designed to handle one device at a time.
I don't work for Cisco. I'm just here to help.

Similar Messages

Can I use a USB hub to connect to multiple USB ports from one GPIB-USB-HS?

I have one instrument which has a GPIB-USB-HS connected and the USB cable is connected to a USB hub. Can I have multiple PCs to connect using USB hub at their respective USB ports? If so, how many PCs can I connect using the USB cable?
I have downloaded the latest NI-VISA from the website.
Solved!
Go to Solution.

You would first need a hub that allows you to switch between multiple pc's and then only one pc at a time would be connected and in control.
When you buy this special type of hub, one of the specs is how many pc connections it has.

Could I use a USB hub to connection both a printer and an external hard drive to the time capsule?

I am planning on purchasing a new router. The Time Capsule looks amazing. However, I have Macs and PC's in my how. So, I need to know if I can connect a printer (for all computers) and external hard drive (for the PC's) by way of a USB hub on the Time Capsule. I've read that you can do this with the Air-Extreme.

Couple of comments:
You will need to use a powered USB hub to connect multiple devices to the USB port on the Time Capsule
The hard drive for use with the PCs will not be compatible for use with the Time Capsule if it is currently formatted for Windows NTFS, which it likely may be if you have been using with the PCs.
Same info applies to the AirPort Extreme.
The following hard drive formats would be supported:
Mac OS Extended (Journaled)
MS DOS FAT32

Do i need a powered usb hub to connect my external hard drive and printer to my airport extreeme

I tried a usb hub from Belkin that is not powered. Is this why I cannot get my hard drive to work on my Airport Extreme?

I am assuming that you are using the newer "square" version of the AirPort Extreme, not the older "round" version.
The USB port on the AirPort Extreme is under powered. I have had to use a powered USB hub with any type of hard drive that I've ever used on the Extreme, even if the drive had its own power supply.
You might want to also check to make sure that the drive is formatted in Mac OS Extended (Journaled) or MS-DOS FAT32. The normal Windows format of NTFS will not work at the AirPort Extreme.

Can I use my iTunes Store account with more than one PC ?

Hi all,
Am I able to use my iTunes Store account with more than one PC ?
I use my account on my PC - but I would like to download the latest version of iTunes onto my Mum's laptop, log in to my own iTunes Store account and rent a movie for her to download onto the laptop.
Is this possible and would I still be able to use my account on my PC at the same time?
Many thanks,
Steve.

Good question.
I don't think you can--if I'm incorrect, someone will tell me--but it seems to me to be easier to simply open an iTunes account for your mom. Then get her a gift card, load it into iTunes for her, and rent a movie that way. Not elegant at all...but workable.
Doc

HT204368 How do I connect more than one Bluetooth enabled music device (subwoofer and Jambox) to my iPad at the same time?

How do I connect more than one Bluetooth enabled music player (subwoofer and Jambox) to my iPad at the same time?

You could start by posting onto an iPod forum instead of a "Using iPad" forum.

Can I use a USB Lead to connect PC with my Printer instead of the network connection?

I have recently moved my BT home Hub (wireless modem) from my study where it sat beside my printer, into the living room downstairs. So that it’s A, nearest to the BT access point (less loss) and B, it can connect directly to my TV, Blu-ray & BT Vision box. I have used a pair of Powerline adaptors to connect the home hub back to my HP PC and it’s all working very well with a faster broadband speed reaching my PC.
The only problem I now have is with my printer, which connects wirelessly to the home hub.
The printer is now right on the edge of the wireless range and really struggles to make a connection, sometimes failing altogether. The printer takes a long while to start up and sometimes fails to collect all of the data.
My real question is:
Can I simply connect my PC to the printer using a USB cable (USB A to USB B) and if I do, do I need to make any other changes to the way my PC connects with the printer?
Printer
HP Photosmart 6510e
PC
HP Pavilion HPE H8-1150UK
This question was solved.
View Solution.

No problem. Here's the link for the download for your operating system. Click Here When I sent my first post, I wasn't sure which operating system you were using.
Here's something you might try first before you do the download. You can leave the current drivers installed ( might come in handy if you decide to reconnect to the network ). Click on your Start button, and then select All Programs. Scroll down to the HP folder and open it. Then open the folder for the Photosmart 6510. Select Printer Setup and Software. You can go through the installation process as you did before, but this time you will choose usb connection.
Let me know what happens.
Good Luck !
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

Can't connect more than one PC to my network at the same time.

When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.

First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Can I use one purchase of Acrobat on more than one computer? I work on a desk top, lap top, and netbook. Do I have to purchase multiple copies or what? (PS -- If I start with a free trial download, how long can it be used for?)

How many times can I use Acrobat Pro on my three compters -- the desk top, lap top, the net book. Do I have to make multiple purchases?

Hi markala,
As per the End User License Agreement a single purchase of retail license for Acrobat is good for 2 computers.
If you want to install it on 3 machines you need to procure a volume license.
Regards,
Rave

Can I use my lightroom 5 CD on more than one computer? Toshiba to my new Mac Book Pro?

I have Lightroom 5 CD that I've used for 2 years in my Toshiba laptop. I have a new Mac Book Pro and was wondering if I purchase an external CD for it, can I use my software on my new computer. I wasn't sure if it can be used on more than one computer...It doesn't say on the software box.
Thank you so much!

There are normally three options: License, buy or try. See image below.
Did you double click on the package in downloads to start the installation?

Can I use my Tiger install disc on more than one computer

I have a Powermac G4 15" and an imac G4 17". The p-mac has Tiger and the Imac has Panther. Can I use the install disc that came with the p-mac to install Tiger on the imac?
Thanks for a great forum!
G4 Mac OS X (10.4.5)

Welcome to Apple Discussions!
PowerMac G4s never were 15". Don't you mean Powerbook G4 15"? If you mean Powerbook G4 15" and it came with Tiger, then the answer is no, as my FAQ explains:
http://www.macmaps.com/upgradefaq.html#SYSTEMSPECIFIC
If you mean a PowerMac G4 with a 15" Apple LCD, it may have come with an older operating system. Use the articles I link to on:
http://www.macmaps.com/macosxnative.html#IDENTIFY
to identify your Mac.
And use
http://docs.info.apple.com/article.html?artnum=25517
to determine which operating system came with that Mac.
If both machines came with pre-Mac OS X 10.4, they can use a Mac OS X 10.4 Family pack if they meet specs for the installation.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

I can't use my USB ports or connect to the Internet after downgrading from Windows 8 to 7

I downgraded my HP Pavilion p7-1534 desktop computer from Windows 8 to Windows 7 today with a Windows 7 Home Premium disk I purchased. I checked online first to see everything I'd need to do, including backing up all my personal files and information to an external hard drive and downloading all my drivers to a USB drive. I followed online instructions and went into the UEFI bios settings and disabled Fast Boot and Secure Boot and enabled Legacy mode. Windows 7 finally loaded and it comes up.   However, my PC now no longer recognizes that I have several USB drives so I can't load my drivers. Also, I can't connect to my MediaCom cable Internet. Does anyone know what I did wrong and what I can do to fix my PC?

Hi,
Please install chipset driver including USB:
    http://support.amd.com/en-us/download/chipset?os=Windows%207
Wireless driver:
    http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56617.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I configure my Bluetooth connections to use more than one wireless audio output device at the same time?

I am trying to get my Macbook Pro (OS X 10.8.5) Bluetooth system to recognize 2 different wireless speakers at the same time. both are currently paired with mu computer and can be chosen independently and work nicely.

Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
You can have as many Projects as you like. You don't need ot finish one before you begin another.
Post back if you have specific questions.
Matt

How can I use iweb 1.1.2 for more than one user account on my macbook?

I wonder if someone can guide me or point me to a previous answer on this, since I haven't found one. I'm simply trying to use iweb 1.1.2 on two user accounts (both labled as administrators) on our macbook. The program functions fine on one account, but when I switch over to another user account on the computer iweb will open, but does not let me start a new page, save, etc.
Thanks much for any response.

Welcome to the discussions. If iWeb's menus are greyed out, the following trick has worked for some:
In the user account which does not let you start a new page, save, etc. — Quit iWeb. Start iPhoto. Select a couple of photos, click on the iWeb icon at lower right and choose Photo Page. iWeb will open up and invite you to choose a template for your new Photos page. Choose any template so that the page is created and then delete that newly created page.
...Now perhaps things are no longer greyed out in iWeb.

Can I use Creative Cloud for students on more than one computer at the same time?

I get different info when I read about how I could use creative cloud.
Somewhere it say I can install and activate on two computers but only run the applications on one computer at the time.
On antother place I read that I can use the applications on two computers at the same time.
So what is correct?
Can I install and activa Creative Cloud for students on my PC and my Mac and also run the applications on both computers at the same time?

I already gave you the info you seek, but you don't seem to want to accept it. Here it is in writing from Adobe's EULA (find it at: General-terms)
"4.1 Subscription-Based Software License.
If we provide the Software to you as part of your subscription to use the Services, then subject to your compliance with these terms, we grant you a non-exclusive license to install and use the Software: (a) in the Territory, (b) so long as your subscription is valid, and (c) consistent with these terms and related documentation accompanying the Software. “Territory” means worldwide, but excludes any U.S. embargoed countries and countries where you are prohibited from using the Software or the Services. You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation. However, you may not use the Software on these devices simultaneously."
You appear to want to believe that because you think you have a way of getting around the agreement without being caught it would be okay to do. You are bound to the agreement if you purchase the subscription. Do you understand what intentionally (and with fore-knowledge) failing to honor a contract constitutes?

Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

Similar Messages

Maybe you are looking for