Can I use a VGA/DVI-D monitor to a new 2014 Mac Mini?

My wife's PC just died (it was a cheap 300 pc that lasted probably 5 years.
She basically emails, web surfs, looks at pictures and plays candy crush on Facebook so she doesn't need anything too high end.
I was thinking of getting her the basic 2014 mac mini but I have a VGA/DVI-D monitor (an older Dell) and it fits perfectly on her desk.
Can I somehow hook up a new mac mini to either the DVI-D or VGA input?
If not, what is the best monitor to get HDMI or should I look into a thunderbolt monitor?
Thanks,

Yes. You will have to purchase one of the following adopter:
- HDMI to DVI and use the Minis HDMI output
- Mini displayport to DVI adopter and use one of the Minis Thunderbolt ports
- Mini displayport to VGA adopter and use one of the Minis Thunderbolt ports
I would use the monitor's DVI input over the VGA input

Similar Messages

  • I plan to purchase a Mac mini and then a new iPad.  Can I use the iPad as a monitor and keyboard for the Mac mini, either through the USB connection or thru Wi-Fi?

    I plan to purchase a Mac mini and then a new iPad.  Can I use the iPad as a keyboard and screen for the Mac mini, using either the USB connector or Wi-Fi?

    I'm sorry, I should have said thru Bluetooth, not Wi-Fi.  I want to use the mini as a base station and the iPad like a laptop that I can sync when I'm home and carry with me when I travel.  Is is possible to hook these 2 up - iPad/mini, through Bluetooth?  I understand I need to use a regular monitor/keyboard/mouse on the initial install.

  • Can I use imac 2007 which have dead hard drive as a Mac mini display

    Can I use imac 2007 which have dead hard drive as a Mac mini display

    If just the hard drive is defective you could mke a bootable USB thumb drive or bootable Firewire HD. Not sure of the connecting cables for the monitor functions. This could provide the functions though.
    http://www.screenrecycler.com/ScreenRecycler.html

  • Can I use a airport express to get internet connection to a Mac Mini that doesn't have wireless by adding it to my existing wireless network?

    I bought a first gen Mac Mini for our daughter and it doesn't have internal airport adapter and was wondering if I got a airport express can I plug it in my daughters room and use it as a local router and just use the eithernet connect from it.  Or would a airport extreme work better for this job.  I have a wireless cable modem that we connect to.  I also have a second question I have a iMac G4 that picks up the wireless signal but will not connect to it does it have to be a Apple airport for it to work or should it be able to connect to any broadcasted signal.  Thanks for the help.

    I'm not sure I quite understand. Do you wish to use the AEX to provide a wireless connection for a device that has an Ethernet port but no wireless capability of its own? You wish to use it in place of a wireless card that isn't internally installed? If so, the answer is, "Yes." It will work as a wireless access point. But you must have an extant wireless network because the AEX won't have an Internet connection when used in this way.
    If you have an existing wireless network with a wireless router connected to your cable/DSL model or your modem is a wireless router as well, then the AEX may connect to it in bridge mode. Note that AEXs don't always play nice with non-Apple routers. Some work; others don't.

  • How can i use 3(or more) hdmi monitors with the new Mac Pro(2013)?

    I've been looking around, trying to find a solution to this problem.
    I saw at one place that an active thunderbold -> DVI will work with the older mac pro model.
    Will this work with the new one as well?
    Will i be able to connect 3 screens if i use 2 passive thunderbold->hdmi and one
    active thunderbold->dvi and then a dvi->hdmi?

    If you need to buy Apple's $99 Mini DisplayPort to Dual-Link DVI Adapters you may find you need to return and replace the adapter/s till you find one that works.
    Recently, after my nMP arrived I bought two adapters. It took 3 trips to the Apple store to find a second one that worked properly. This also happened a few months ago when I was buying those adapters.
    You should be aware that you'll also need the DVI cable that has the full set of pins, not the one with the row in the middle missing.
    If you check on the Apple customer reviews in the online store you'lll find the issues and possible solutions to this situation.
    Eventually I returned the second adapter when I found a way to get 2560 x 1600 through the HDMI port. I now have two 30" monitors that display 2560 x 1600.

  • Can I use laptop as an external drive to install software on Mac mini

    I am trying to figure out how to install ms office on Mac mini

    Yes
    You can do it over wifi/network by:
    DVD or CD sharing: Using Remote Disc
    Or boot the laptop, if it is a Mac,  in Target mode and connec the two with a FireWire cable.
    How to use and troubleshoot FireWire target disk mode

  • Can I use my old powerbook (2002) as the screen for a mac mini?

    Want to make use of my powerbook as its in it's otherwise good, just can't handle new os, etc.
    Any thoughts?

    ScreenRecycler can use the screen of another computer to extend the screen of your main computer.
    Give it a try.

  • I just bought the new 2014 Mac Mini 2.6 8Gig for $699 at the Apple Store Online. I want to use it for light editing in iMovie making video's for YouTube, I couldn't afford the higher priced models. Is this going to work for me? I hope so..

    Will this do basic video editing for YouTube Video's in iMovie, I hope so.  It's all I could afford.
    Just under $800 with tax and Applecare.
    It's stock 2.6 8gigs 1 terabyte hard drive.
    I have two monitors DVI that I plan to hook to it.
    I know it's weak but will it get me going without too much hardship.
    I want to grow into the more high priced computers and Final Cut Pro later on.
    I know I will need a bigger computer then.
    Thanks

    There are many people using the basic (i5) 2012 MacMini and even older ones to edit complex films in FCP X so you should have no problems.
    I have been using FCP 7 and FCP X since they came out on my 2008 iMac Core 2 Duo and am thinking of getting the same model as you rather than pay the astronomic price for a new 27" iMac.
    The performance won't be quite as fast but it will be at least 4 times faster at rendering than my old iMac.

  • How do I set up my 2013 AOC 27" monitor to my new 2014 Mac Pro 6 core?

    I've got the DVI to USB adapter that worked fine on my 2012 MacBook Pro, but this doesn't seem to be working.

    What video inputs does the monitor have?
    You can purchase a mini display port to DVI adopter. It plugs into a Thunderbolt port.

  • New 2012 Mac mini having screen resolution problem when I connect to either 27" LG or 22" Hannspree monitor. Tried mini display port to VGA/HDMI and HDMI to DVI-D cables... all same isse

    New 2012 Mac mini having issues in connecting to third party Monitors. Connected my mac mini to a 27" LG monitor. Text looks blurred. Tried connecting to the monitor using 3 options. 1) mini port to HDMI, then HDMI cable to LG monitor. 2) Mini port to VGA, then VGA cable to monitor 3) HDMI port on mini mac to DVI-D cable then DVI to DVI cable... In all cases text is not clear. Anyone has similar issues with latest mini mac. The monitor works fine when I connect to a windows 7 Samsung laptop. Any input is highly appreciated. Thanks in Advance

    Why do you use always 2 cables? There's a lot that can go wrong.
    1.) Hardware:
    - Use only one cable, best an HDMI->HDMI cable. It doesn't need to be an expensive one, they've proven to be no worse than those "esoteric", expensive ones.
    - Set the monitor to the HDMI input.
    - The modes you are listing are only "picture modes" changing color/brightness/contrast settings, not resolution or the likes, so pick the one you like best later, or enter your own settings under Custom.
    2.) OS X:
    - Usually the Mac detects the screen itself and chooses the best settings, so by default you need to do nothing than make a proper hardware connection to get a decent image.
    - However, there have been issues with new Mac Minis and particularly their HDMI ports. But reportedly they have been fixed with a software update. So, launch the App Store and check under Updates if there is one for you to install. If so, do it; otherwise you should be good to go.
    - If you require, go to System Preferences -> Displays. In the Dispaly tab, by default, "Best for display" should be selected, and that is typically true. If you want, select "Scaled" and 1920x1080, plus a frequency from the list (where higher is usually better, but just pick the one that works best for you). If you can't see a change to the better, you best go back to "Best for display".
    - If you are not happy with the colors on your screen, you'll find eventually more than one choice in the Color tab, though your particular screen should be in the list and its Display Profile should get you the best result. (Double-check picture modes on your display: if you're far off there, you won't make it much better with the Mac's settings).

  • Can I use apple TV with a monitor?

    Can I use apple TV with a monitor?

    if the monitor have an hdcp or displayport or dvi that support hdcp yeah
    but if it don't have  speakers  you have to connect some amp which have optical input to get sound
    and monitors with only subD or other analog sources or dvi which dont support hdcp would not work

  • I dropped my macbook pro and the screen is broken can i still use it with an external monitor? Or can I or how do I transfer hard drive files to my mac mini?

    I dropped my 17" macbook pro and the screen is broken. Can I still use it with an external monitor? When I plugged it into a monitor I had used it with before, I'm not able to see anything on the macbook screen to control it. It came on but I just got the blue screen with nothing else after typing in my password. (Didn't see the password form just assumed it was there somewhere and it did go from space to blue screen but no desktop icons, files, dock strip at top or anything else, just blank blue screen) so I can't access the system preferences.
    Or can I / or how do I, transfer hard drive files to my mac mini? If not salvageable as is can I pull out the hard drive and make it an external harddrive? In otherwords is anything salvageable? It seems it's coming on I just can't access anything. BTW I was told it would cost aprox $1000 to replace the screen! I paid almost $4000 for this thing and it was running great - makes me sick to lose it!

    I'd like to promise you that everything will be fine if you just get the monitor going - but it's hard to know what the hardware damage might be. It might be the monitor, or the damage might be greater.
    Your best solution would be visit your local Apple Store and let them know what your situation is. They have access to diagnostics you don't, and they might be able to the best way to save your data and keep you computing. It's still not covered, but they can tell you what your current options are.
    Um, you might consider investing in a backup drive.
    And there other repair options, too. Powerbook Medic http://www.powerbookmedic.com/xcart1/pages.php?pageid=67 offers reliable repairs, and quotes prices well under Apple's.

  • Can i use my imac as second monitor for my  pc / notebook

    Can i use my imac as second monitor for my  pc / notebook

    Without any knowledge of the year machines you have it's impossible to answer that question. iMacs adn MBA's have been around for many years now so we have no idea of the exact specs your machine have. Remember when posting you need to be complete and paint a picture for us as we aren't there to look for ourselves. Your question should be  posted something like:
    " I have a 2011 27" iMac and a 2009 MacBook Air, can I use the iMac as an external display for my MacBook Air?"
    BTW what you are referring to is called Target Display Mode. Apple does support that on some 2009-2011 iMacs. You can find additional information at:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/TS3775

  • Can I use my ipad2 as a monitor for flexible USB camera

    Can I use my ipad2 as a monitor for flexible USB camera. I have a flexible camera that connects via USB and has LEDs at the lens for illumination.

    Not unless it is wifi and has an app.

  • Can I use my Imac as a monitor for my Macbook Air?

    Can I use my iMac as a monitor for my Macbook Air?

    Without any knowledge of the year machines you have it's impossible to answer that question. iMacs adn MBA's have been around for many years now so we have no idea of the exact specs your machine have. Remember when posting you need to be complete and paint a picture for us as we aren't there to look for ourselves. Your question should be  posted something like:
    " I have a 2011 27" iMac and a 2009 MacBook Air, can I use the iMac as an external display for my MacBook Air?"
    BTW what you are referring to is called Target Display Mode. Apple does support that on some 2009-2011 iMacs. You can find additional information at:
    http://support.apple.com/kb/HT3924
    http://support.apple.com/kb/TS3775

Maybe you are looking for

  • How to re-enable Manually Manage Music and Videos without erasing all music and videos

    I have an iPhone 4S running iOS 8.1.1 and iTunes 12.0.1.  When I updated iTunes recently to the new version, 12.0.1 it unchecked the Manually Manage Music and Videos option on my iPhone's summary page.  I just want to re-enable this feature without h

  • [AwesomeWM] Applications locked to one screen in a dual monitor setup

    Perhaps the title should be "Multiple Screens with multiple video cards." I imagine  my confusion here is the reason I am unable to move clients from one screen to the other in awesome. Though the cursor moves fluidly between Screen1 and 2,  MOD4+dra

  • P45D3 Platinum and OCZ Memory problem

    Hi  recently i was set up my new PC with the following parts:  MAINBOARD:P45D3 Platinum  CPU:Intel Core2 Quad Q9400 2.66GHz  MEMORY: OCZ OCZ313332GK 2x1GB PC10600 DDR III RAM (DDR-1333) Recommended by MSI.  HDD: SEAGATE BARRACUDA ST3500320AS 500GB 72

  • Replace tcp_wrappers with what?

    I use a very simple home network system using sshd and scp. Basically I have sshd running on all 4 home computers and then I use /etc/hosts to list the IP addresses and hostnames of each computer. I then use /etc/hosts.allow to allow the sshd deamon

  • How do I get purchased actions to work on CS6?

    I am new to Photoshop. I purchased actions. I followed the directions to install it. The actions show up in my list, however, I can not get them to work. It doesnt allow me to click play on any of the new purcahased ones. I have Windows 8 operating s