Can I use a VS-700C control surface with Logic Pro?

Hi,
Does anybody know if I can use a Roland VS-700C control surface and/or VS-700R audio interface with Logic Pro?
Cheers,
Craig

If it supports the Makie protocol, it might work... but I wouldn't purchase one on that basis without trying it first.

Similar Messages

  • Using Yamaha AW2400 as control surface for Logic Pro 9

    I am a freelance pro sound engineer currently working as tech support for a local school. They have a Yamaha AW2400 in their studio, something which I have never come across before despite using numerous Yammy desks. They also have a Mac running Lion and Logic Pro 9.
    What I want to do is use the desk as a control surface for Logic and record direct to the Mac if possible. I have installed the Yamaha USB-MIDI drivers on the Mac and had the desk running as a device for file transfer (via the USB connection) but everything else is beyond my knowledge of the desk and Logic.
    I am a Pro Tools guy so Logic is a bit new to me but I know how to setup a new control surface. and the basic operations.
    What I need help with is...
    - what control surface to use as there is no preset on the desk for a AW2400
    - what port settings to use on Logic
    - what TX and RX settings to use on the AW2400
    - what Remote Out settings to use on the AW2400
    - any other info I may need
    Thanks in advance, hope some can help.

    See page 204 of the AW2400 User Guide...
    http://www2.yamaha.co.jp/manual/pdf/pa/english/recorders/aw2400_en_om_b0.pdf
    Note: the User Guide says that only LP7 is supported but you never know.. it may work with LP9... Test and see..

  • Can I use my old Garageband Jam Packs with Logic Pro X?

    I'm in the process of moving all of my Logic X Library content to an external hard drive and it occurred to me that I still have 4 GarageBand Jam Packs that I might be able to use in Logic X. Does anyone know if there is any real difference in the loop content of the Jam Packs and the loops that are on Logic X ? Has anyone tried this and made any kind of comparison? Just wondering. Thanks.

    When you download all the additional content from within Logic Pro X.. any jam packs you are missing are then installed during that process... but if you already have them all installed the LPX additional content installer will find them and set them up for use in LPX.
    The content of the Jam packs are identical....

  • Digidesign Command 8 control surface with Logic?

    Does anyone have any experience getting a Command 8 to function as a control surface for Logic Pro 7? I'm really having trouble finding any information on it and I could really use some help. I'd appreciate any input or suggestions. Thanks,
    -Jeff

    Although it may have a standalone mode, it's not emulating any particular controller, such as the Logic Control or Mackie HUI protocols. It may send MIDI control messages that Logic can pick up (my Trigger Finger can do that as well). However, unless Logic sees the right ID from the Command 8 (whether in native or emulation mode), it won't recognize it as a control surface and send messages back and forth with it, thus not being able to take advantage of things like the display and motorized faders.
    It looks like the Command 8 and the ProjectMix I/O look rather similar (yes, I know that Digidesign and M-Audio are owned by the same parent company).
    jord

  • Control Surface for Logic Pro 7.2

    Hi Everybody !
    I'm a newbie in Mac and Logic Pro. I want to buy a control surface for Logic Pro.
    I found that Behringer B-CONTROL FADER BCF2000 Controller is compatible with Mac and Reason 3.0 but I'm not sure that it is compatible with Logic Pro. And it is within my budget !
    Can anybody give some comments on this model ? Any suggestion other than this model ??
    Cheers,
    edtayin

    Hi Everybody !
    I'm a newbie in Mac and Logic Pro. I want to buy a
    control surface for Logic Pro.
    I found that Behringer B-CONTROL FADER BCF2000
    Controller is compatible with Mac and Reason 3.0 but
    I'm not sure that it is compatible with Logic Pro.
    And it is within my budget !
    Can anybody give some comments on this model ? Any
    suggestion other than this model ??
    Cheers,
    edtayin
    Just in case you buy one (and you should), I put a tutorial
    on how to set it up with Logic. The manual is not really
    clear on everything. Just go here
    http://www.logicprohelp.com/viewtopic.php?p=16210#16210
    It should get you up and running.
    P.S. the BCF also does let you control Plugin
    parameters along with 32 presets you can customize
    it to your workflow.
    Duel Processor 1.8 G5, Duel Raptors drives, 2GB Ram   Mac OS X (10.4.6)   LP72,Reason,StylusRMX,Digitech,TCHelicon,BBE Sound Processors, JBL 4311 Monitors

  • Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?

    Can I use the Sony XVAC-I Codec with Premiere Pro V6.0.5?

    No. You need to convert to another format first or use a third party plug-in.

  • Control surface for Logic Pro

    Hi There
    Any ideas- what is the best control surface to use with Logic Pro?I would like a controller with at least 16 or 24 individaul faders.
    Does the Mackie X Bus emulate a controller for Logic Pro?
    thank you
    G4 1.25 gig   Mac OS X (10.3.8)   G4,

    I'm using a Mackie Control Universal and absolutely love it. The integration with Logic is top-notch. It would be nice to add an Extender and have 16 faders, but I'm finding that for what I do 8 faders at a time is plenty.
    The X Bus has a Mackie Control layer that gives you the same amount of control. I believe the MCU's buttons are all displayed up on the X Bus screens. I'm sure you can find out more in the owners manual: http://www.mackie.com/products/digitalxbus/pdfs/X200OM_Ver1_04.pdf
    Good luck!

  • Setting Up Roland A-Pro Control surfaces with Logic

    I have struggled with Logic Pro 8.0.3 and a new Roland A-500Pro midi keyboard which was reputed to be "easy to configure with a Mac".
    Despite many discussions with a Roland help person (he tried very hard), The A-Pro control maps provided just don't work at all. Buttons to select tracks actually play sounds. I have both set up according to the Roland instructions (no good) and according to this forum post (https://discussions.apple.com/message/17034355#17034355) which suggest you don't even need to use the Roland interface.
    Anybody have an envrionment that works?? or can suggest ways to configure.
    Desperate for help.

    The Yamaha O1v had a fader mapping setup that worked really really well with Cubase. You simply selected the O1v from a drop down menu in Cubase and all the faders and EQ settings automatically mapped to the board. Only a few boards were listed in the Cubase menu.
    Curious if there are certain boards might be listed in a similar feature in Logic.
    (Planning on jumping on the Logic train at the same time as picking up a board...)

  • Using Eventide Eclipse as outboard gear with Logic Pro 8/9

    Hi, people,
    Anyone using Eventide's Eclipse as outboard FX box with Logic Pro? I'm thinking of getting one and running it via digital I/O into my RME Fireface 800. Any info appreciated.
    Thanks, Scorpii.

    Yes it is possible, first connect your outboard to the soundcard.....then load the I/O (inserts) plug in on the track you want to process....you can find it in the utility menu....then set the routing of the signal in the I/O window....if you want to record the processed track create a new track with the right routing and the work is done.hope this replay help you . Regards

  • Control surfaces with Logic Express

    hello all
    Im new to MAc , completely new having been PC since the year dot...Having used Cubase since atari days I have a Steinberg Houston Controller surface. Anyone know if it is possible to use it with Logic Express before I spend £150 on the programe please??

    Hi,
    nope, the surface wouldn't work natively on a Mac. You can only use it's MIDI features and remap the controls to functions in Logic. As long as the interface sends MIDI, this will work, but there won't be any access to the special features i guess. Guess why? Steinberg wouldn't want to provide a driver for another DAW than Cubase. Sneaky little ones they are...
    But you can try to sell it through ebay.
    Fox

  • Can I use Front Row on external monitor with MacBook Pro's cover closed?

    I've seen that you can use the remote to control Front Row even when the lapatop's cover is closed (on a MacBook Air). Is it possible with a first generation MB Pro? Are there special settings?
    Thx

    You can use a MacBook Pro in "clamshell" mode if you have the AC adapter plugged in for power, an external display attached and an external keyboard and mouse (USB or Bluetooth) to wake the computer after it's been closed. This is the official word from Apple:
    http://support.apple.com/kb/HT3131
    However, even if you don't have a keyboard and mouse, you should still be able to wake the MacBook Pro using the Apple remote by pressing the "menu" button. (You do still need to have the power plugged in and the display plugged in.)
    -Doug

  • Control surfaces with Logic?

    Have a Macbook pro & looking to get Logic. Previously was running Cubase with a Yamaha O1v deck & it worked great with Cubase. Sold all that & looking to get a more compact project studio going ... what control surfaces integrate well with Logic?

    The Yamaha O1v had a fader mapping setup that worked really really well with Cubase. You simply selected the O1v from a drop down menu in Cubase and all the faders and EQ settings automatically mapped to the board. Only a few boards were listed in the Cubase menu.
    Curious if there are certain boards might be listed in a similar feature in Logic.
    (Planning on jumping on the Logic train at the same time as picking up a board...)

  • How to use my TS 12 Ensoniq keyboard with Logic Pro X

    I just got Logic Pro X but I have no idea how to use my midi keyboard. I have a midi to usb cable running between my TS-12 Ensoniq keyboard. How do I set up the drivers or really just get it all to work. I'm a noob to the hardware stuff though I'm quiet fimilar with Logic 9. Help would be great asap!

    AidansMarbles wrote:
    I have a midi to usb cable running between my TS-12 Ensoniq keyboard.
    So I guess it can make the sound of one hand clapping?
    Anyway...
    Does the USB-MIDI cable need drivers? What brand is it? There are some cheap ones floating around ebay that don't work properly with all hardware. Assuming you've got a working one that needs no drivers, all you need to do is plug it in, the OS and Logic should detect it automatically. In Audio MIDI Setup (MIDI page) you can check if your Mac indeed recognizes the MIDI interface. It will not show the TS12 itself, just the MIDI interface.
    You can find Audio MIDI Setup in Applications>Utilities.

  • Using 2 or more USB instruments with Logic Pro

    I recently purchased a Korg M3 (which is great). I'm considering adding a Motif XS rack.. My question, are any Logic Users out there using Logic Pro with two or more USB instruments connected?
    Are there any issues with that (other than assigning to different MIDI channels)? Does USB bog down when there is too much data?

    I'm only using these three lines of code. If they don't work, neither will any more lines.
    I discovered the issue thought. If I read two different fields from the same user-defined table then it works. If I read from two different user-defined tables I get the error. Apparently B1 can't handle parameters being set from two different ud tables.
    This works:
    DECLARE @S2 nvarchar(30), @S3 nvarchar(30)
    SELECT @S2 = (SELECT T0.U_Country FROM [dbo].[@COUNTRIES] T0 WHERE T0.U_Country = '[%2]')
    SELECT @S3 = (SELECT T0.U_CCode FROM [dbo].[@COUNTRIES] T0 WHERE T0.U_CCode = '[%3]')
    While this does not:
    DECLARE @S2 nvarchar(30), @S3 nvarchar(30)
    SELECT @S2 = (SELECT T0.U_Country FROM [dbo].[@COUNTRIES] T0 WHERE T0.U_Country = '[%2]')
    SELECT @S3 = (SELECT T0.U_AdCode FROM [dbo].[@BPGROUPS] T0 WHERE T0.U_AdCode = '[%3]')
    Alan

  • I can't get my Fantom X6 to connect with Logic Pro X since I updated to Mavericks iOS 10.9.2. Any Suggestions please?

    Hello Guys, I hope someone has experienced this issue or just know a fix or work around for it. Roland will not be developing new patches or what have you for the fantom x series and I figured thats the reason my keyboard is not working with this new OS. If you guys know a work around I would greatly appreciate it or tell what kind of keyboard or midi controller you are using so I could purchase one. Thanks

    X6 (via midi cable) plus good quality Audio/Midi interface (such as a Motu)  = No issues with LPX or Mavericks....
    In other words.. stop using USB to connect to Mac.... and you should be fine.

Maybe you are looking for