Can I use "accesshw.zip" to make the in port and out port VIs work (for NT) for Labview 6.0.2.

I am trying to write to the parallel port using labview 6.0.2 (vi attatched). It does not seem to be working with NT though it does with Win 98.
The information about the software (accesshw.zip)mentions versions 4.x and 5.x only.
Please refer to the link given below:
http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/49664743ded6f1da862564bc004e3a7f?OpenDocument
thanks.
Pari.

Hi Rob,
I cannot completely agree..... Please find attached a
accesshw_lv6.llb. Originally it was made for LV5; now in LV6-version) This .llb contains accesshw-files for use under NT & W2k. These files work, if you store them (!! including the sub.vi's !!) into: C:\Program Files\National Instruments\LabVIEW 6\vi.lib\platform\system.llb (this should be the typical path). The "old" In Port and Out Port vi's have to be substituted. Find in addition a simple test-program for use with scope in order to test
the execution speed / toggeling of bits.....see the scope-picture copied into diagram. In addition I strictly recommend the use of buffer-circuits in order not to destroy the mainboard-IC's by accident. If somebody needs schematics or programs rela
ted to parallel port - example see jpeg-file please mail to: [email protected]
regards
wha
Attachments:
accesshw_lv6.llb ‏171 KB
printer_port_test.llb ‏135 KB
8255_diagram.jpg ‏186 KB

Similar Messages

I wish to purchase creative cloud for students, now i have two computers that i use actively, can i use cloud on both at the same price and download?

I wish to purchase creative cloud for students, now i have two computers that i use actively, can i use cloud on both at the same price and download?

Your subscription allows for you to install on two machines. One condition is that only one of the installations can be in use at any given time.

"in port" and "out port" VIs are not in the functions palette!

Hi,
I am using LabVIEW 2012 on a Win 7 64 bit. I want to read a digital input (3.5V) using PC parallel port. I also read this white paper:
http://digital.ni.com/public.nsf/allkb/B937AC4D8664E37886257206000551CB
I searched all the functions palette for “in port” and “out port” VIs but I could not find them. Apparently they are not supported in 64bit OS. What are my alternatives for reading digital input via PC parallel port?
Thanks.

They have not been supported for quite some time. What happens when you use the recommended VISA api?

Can I use Hot Corners to make the display sleep immediately?

I have Hot Corners set up so that the screen-saver kicks in as soon as I move the mouse to the top-right corner. However, I'd really like to be able to make the display sleep immediately, rather than show the screen-saver first... can I do that? There doesn't seem to be a Hot Corners option for "Display sleep".

Hi Garth
That can be set using expose.
Open up preferences /dashboard & expose.
Click on one of the buttons to set your option to start screen saver by choosing the corner you wish to use.
Message was edited by: Glenn Leblanc
Sorry, misread your message the first time. Can't be done with hot corners.

Why is it that no sooner do I update my iTouch 3G 32GB to iOS 4.3.5 that suddenly I can't use Wi-Fi anymore? The bar is greyed out and says "No Wifi". I can't use bluetooth either.

Is Apple not worried about the older models or what? My iPod was perfectly fine up until the 4.3.5 update. Now, I've lost about three or four $4.99+ games that I can't redownload for free, a whole music album, and I can't use wi-fi or bluetooth. I can't send in my iPod to get it fixed if that's the problem because my warranty's expired. I can't even find out if there is a problem without buying a help session. What's going on? It's almost like I need to buy a brand new iPod, and I don't have $300 to spend because Apple decided that the new iPods are more important than the old ones. Is there anyway I can fix this without downgrading or buying a brand new $300 iTouch?

Resolution
If you encounter this issue, try the following steps and attempt to enable Wi-Fi or Bluetooth after each one.
Verify that Airplane Mode is turned off.
Update your iOS device to the latest version of iOS.
Reset Network Settings. To do this, tap Settings > General > Reset > Reset Network Settings
Restore your iOS device in iTunes.
If you are still unable to turn Wi-Fi or Bluetooth on or off after attempting these steps, contact Apple or your wireless carrier for additional assistance.

What makes the Print Screen and End Buttons stop working?

I am 3 weeks into the trial period. Twice before, the Print Screen (manual capture) and End buttons stopped working. The only way I found to correct this is to uninstall and reinstall the application. Am I doing something wrong, or is this a bug?

More information on this issue: When I start recording in any mode, one screen is captured. No other screens are captured during execution on program functions, menu selection, navigation, etc. Once again I removed and re-installed the application. This time it made no difference.

Can I use 2 different accounts on the same Iphoto and then share all these pictures to both accounts?

I have all my family pictures and videos on my macbook pro. Me and my wife have separate apple ids and both of us hold iphones and ipads.
I would like to know if it´s possible to have both of our accounts registered on Iphoto so that all we photograph automatically goes to Iphoto and, thereafter gets sent to all our produtcs.
If not, is it possible to cet the devices to automatically send all our pictures to each other and then to iphoto?

no
You can manually do it with a shared PS
LN

How can I make the return receipt and deliver status notification work ?y

I have checked marked "return receipt" and "delivery status notification" when doing emails.
Doesn't seem to be working.
Please help

are they not working, or has the recipient simply declined to send them? That is the real question. Sending mail to yourself rarely triggers the return receipt

What would make the webcam,usb and fingerprint reader quit working?

On DV7 6c95dx

Hi jeffriespc,
Thank you for your inquiry, I will be glad to assist you!
I understand that the USB ports,Webcam and Fingerprint reader have stopped working. Have you tried running The HP Support Assistant to look for updated drivers and help resolve issues. Do you have all your Windows updates done?
You can check for hardware failures by running diagnostics. Testing for Hardware Failures (Windows 7, Vista).
If this has not resolved your issue, you can do either a restore back to a known good date or a recovery.
Using Microsoft System Restore (Windows 7)
Performing an HP System Recovery (Windows 7)
If you decide to do the recovery, you will get a prompt to backup your personal files. if you have not done one, I suggest you do it now to prevent data loss. Here is a document to assist you with restoring them.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Hi, I have the new iPad and it's been working absolutely fine for me up until now, I have made no updates and now every time I open a Internet worthy app it keeps telling me to 'reconnect' to the Internet and I am already connected with 3 bars ?

when I open safari it works and instagram, but I'm not getting any notifications through and my twitter isn't working either,
Help would be greatly appreciated x

Maybe try resetting network settings in settings, general, reset.

Using the In port.vi and Out port.vi in LabVIEW access my the Cards(Home made)

Hi Everyone,
I have got the Cards (home made 8 bit and 16 bit ) plug in at slot ISA my PC (I am using the commands inport and outport (addressed with 318-31A Hex) in C language to access very good).This now,I want to use LabVIEW language to access data directly to Port at my the Cards. In LabVIEW, Can I access data to port using the In port.vi and Out port.vi located in the Advance?
My English is poor, you don't laugh when you read it.
Thank you a lot.

SachaE wrote:
> LabVIEW 7.0 cannot use the built-in In/Out Port VIs with a 32-bit
> address. Instead, you will have to use the versions of these VIs found
> in previous versions of LabVIEW.
Are you talking about physical memory access here? If so that is
something entirely different. The Intel x86 architecture uses a separate
IO address range which is entirely separate from memory space.
And at least up to the first Pentium models it was definitely never
possible to address more than 16 bits for IO address space.
This of course has gotten a little more complicated nowadays with many
PCI boards being actually mapped into memory address space instead of IO
address space. So eventhough a PCI board is more like an IO device it
often is accessed in the memory space.
> Actually, the In Port and Out Port VIs are intended for 16-bit port
> I/O and not for writing to arbitrary addresses in memory. For this
> reason, writing to 32-bit addresses never should have been allowed.
I think the VIs to access physical memory addresses were different than
the ones to access IO addresses. And yes it is definitely not a good
idea to have an application poke into physical memory as it could
completely screw the system to the point where you couldn't start it
anymore. Also IO devices mapped into memory address space are almost
always typically plug and play devices, so their address is not really
fixed and you need to do quite some more work on OS level to enumerate
your hardware and find the resources used before trying to access it.
This is something not really suited to try to do in LabVIEW and
therefore should be at least implemented as DLL but in fact anything but
a device driver is a very bad kludge.
> One possible work-around would be to use NI-VISA to perform
> register-level programming. NI-VISA gives you access to any PXI/PCI
> board, not only NI boards, and can be used to access the board's
> registers.
>
> http://zone.ni.com/devzone/conceptd.nsf/webmain/ADF3152837E2B4A486256B5600642AC7?opendocument
Thanks for this. Didn't now this existed in NI-VISA. Will check it out.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Can I use 2 Time Capsules on the same network

Can I use 2 Time Capsules on the same network
Posted: Jul 23, 2009 1:49 PM Reply Email
Here is what I want to do. I currently have a time capsule used for one end of the house. Currently my 2 kids rooms are in an addition that I have run a cable from the time capsule to each of their rooms. If I want to give them wireless for that part of the house could I add another TC, for wireless and they can both backup their macbooks to that time capsule.
So Can I add a 2nd time capsule to extend by "N" network, or should I just go with an AP express or extreme and let them each have their own HD backup for each macbook?
Brett

Have bought many reconditioned (Refurb) product from Apple site and have always been happy with them. To date none have failed me and we have been Apple customers since 2006. With that said when you buy Refurbs make sure you know what model you are getting. The current TCs on the Apple site are last generation. The way to tell is to check the model number against the current one. Easy way to do this is to put both in the shopping cart and compare the model numbers. The Refurb model number is FB277LL/A and the new TC model is MB765LL/A. The first digits identify whether a Refurb or new, the rest should be the same if they are the same model number.
Before you buy, now which model number you want and then check other sites to compare prices. I recently purchased a new TC on Amazon for a better price then the Apple Store Site. For larger Refurb purchases like MBPs, we choose to buy directly from Apple; but for peripherals we often buy from OWC, Amazon, and other sites. Hope this helps.

How can i use offline & online database in the same time?

how can i use offline & online database in the same time?
my database in another server when the connection true it connect
but if not does not work
i wanna make offline database if the server not connected it connect offline then the server is on it alter all data from the offline to the server.

User, please tell us your Jdev version!
There is no such functionality build into the framework. The offline data base is only for designing the db, not to have a backup db.
If you can't connect to the db the application will not work.
Timo

Can i use apple tv to make my mac a monitor

can i use apple tv to make my mac a monitor

You can, somewhat. Certain iMacs released in the last two years support "Target Display Mode" which lets you use them as very expensive dedicated external monitors. In theory you could hook your Apple TV up to that with an HDMI to minidisplayport or (possibly) Thunderbolt adapter. (See http://support.apple.com/kb/HT3924 for Target Display Mode specifics)
But I would have to question the value in that, since you could buy a decent comparable sized flat screen TV for 1/5th the price of that iMac.
If your goal is to watch media content on your iMac, you would almost certainly be better off doing it using the Front Row application, or setting up iTunes to display fullscreen content and control it from your iOs device with the App Store's "Remote" program.

Can i use my itouch to make skype phone calls without wifi.

Can i use my itouch to make skype phone calls away from a wifi source just like a conventional mobile phone.

No. The iPod does not have a cellular connection. Thus, an iPod without wifi can't connect to the Internet

Can I use "accesshw.zip" to make the in port and out port VIs work (for NT) for Labview 6.0.2.

Similar Messages

Maybe you are looking for