Can I use After Effects/Premiere Pro to change 29.97 to 23.97?

I shot footage on BMCC at 29.97 accidentally. I now need a way to change it back to 23.97 because the rest of my footage was shot like that. Anyway I can change this? Either using Adobe After Effects or Premiere Pro? The footage is all on sticks with minimal movement. Can it look the same as 23.97? I've heard using Twixtor can fix this, but want to make sure there isn't any other way before I look into that. Thanks.

Twixtor will do a better job of it because it takes more parameters into account than AE does.
And get that frame rate straight! it's 23.976, not 23.97. Those tiny fractions can come back to bite you later on.

Similar Messages

How can I use After Effects filters on a whole sequence without getting stuck in After Effects?

It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?

I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'.

I can't use After Effects CC

Hey everybody !
I have some problem with "After Effects CC".
I have the " Creative Cloud Student and Teacher Edition" and that's ok (photoshop, Illustrator, Premier pro, etc.) But I don't know why, I can't use After Effects.
Something is wrong.
Exemple : Here, you supposed to read "Coucou" with simple text. It's the same problem with all tools.
I have already uninstalled it, and updated.
Thanks
Laury

Well, let's start with the obvious.
Do you KNOW how to use Adobe After Effects?
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

New build for After Effects, Premiere Pro and C4D

I was supposed to upgrade back in december, but that project got held off because of a financial emergency, but now i got some money set aside, i'll like it if i could get advice on this build.
CPU : Core i7 5820K 6-core 3.3ghz
Cooler : Noctua NH-D15
MB : Asus X99-A
RAM : Crucial 4x8 GB DDR4 2133 mhz CL15
HDs : Already own a SSD and a few others
GPU : Asus GeForce GTX970 STRIX
PS : EVGA Supernova G2 750 watts
Case : Cooler Master HAF 932 (already owned)
I intend to overclock the processor to around 4ghz, am i well set to achieve this with this setup ?
I use After Effects the most, but i'm really digging 3D and will probably use it more and more, I guess my priority would be good render times and a smooth experience in softwares.
Thank you !

I found this post which is quite reassuring: https://forums.creativecow.net/thread/3/959855
"I just installed the GTX 970 into my Adobe CC environment.
INCREDIBLE. I created a 4096 sequence, scaled up a 1080 clip to full screen, applied Gaussian blur, Noise, and rotated it on two 3D axes (keyframed), with color correction....
It played back fullscreen, full speed, no dropped frames, and the GPU load never even broke a sweat beyond 19%.
My previous card was a GTX 560 SE. This is not an upgrade, it is a paradigm shift.
Premiere accepted the card after the polite "Enable this unsupported GPU" notice.
Exports (at least to H.264) are taking the card up to about 76%."

After effects & Premiere Pro CC problems -HELP-

Hi everyone,
I'm having some slight issues with after effects and adobe premiere CS6 CC on my notebook.
I downloaded the CC and can install all the apps, and every app (photoshop, illustrator, mediaencoder etc all work.
My notebook specs:
8GB ram
Nvidia 840M
(It says there is an integrated graphics aswell, maybe this could be the issue? that AE and Premiere select this one instead of the 840M)
Samsung evo 250GB SSD (Bootup drive and this is where CC is installed)
500GB HDD 7200rpm
For after effects:
When I run AE it starts the loading screen, but it crashes almost right away when it says "Initializing Mediacore" and gives this error:
After Effects error: Crash in progress. Last logged message was: <7304>
<GPUmanager> <2> Sniffer Result Code 3
(Error code 0 :: 42)
I think it has something to do with my VGA drivers, but I have uninstalled all the Nvidia and Intel drivers and installed both the newest and previous versions of drivers. But none fixed the issue.
Now heres where it gets interesting. yesterday I decided to test if a cracked version of AE CS6 worked on my computer. And it did, it openend smoothly and everything worked as far as I could test.
After testing I unistalled the cracked version (completly wiped everything), and reinstalled CC. But still no luck.
As for Premiere, the moment the loading screen pops up it says "Adobe Premiere CS6 has stopped working". All I can click is cancel, and when I do it just closes Premiere.
I saw a thread where someone said the issue was Nvidia geforce Experience. But even when I don't install this AE and Premiere don't work.
hope I gave you all enough information!
thanks for your time

read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Producing a Video - Best Render Settings for After Effects & Premiere Pro?

Hi Guys,
I just want to make sure I am producing my video the right way .... it takes an awfully long time and I have to use 2 programs....
First I have a 1080p HD Camcorder - so when I shoot my videos I want to ensure they are 1080p.
So I do my editing in After Effects and produce the video as an AVI file - and usually a 5 min clip outputs as 70GB (Full Quality Settings)
I then take this video and import it into Premiere Pro and produce it as WMV file (Full Quality) and then the final output is 200MB and the quality is not lost - so I am happy.
So my question is am I doing it the best way?
I tried to produce it as a WMV straight from After Effects but I am not sure what settings to pick that will keep the quality and not make the filesize huge - so I am forced to use 2 programs.
So if there is an easier way let me know ... bc it sucks using 2 programs to render out the video.
And also is that normal - 200mb for a 5 min clip or is that still too big?
Remember I want to keep things 1080p.
If you want to see a sample of my video that I am producing - you can watch my YouTube channel at www.youtube.com/socialmindz
Thanks for your help.
B

I agree with Rick.
There's more information about the YouTube presets here:
http://forums.adobe.com/thread/878521

Sager NP9570 - After Effects/Premiere Pro/SpeedGrade

Hello everybody,
I want to buy a laptop that will double as my desktop. I want to work in After Effects, handle 4k in Premiere Pro, color grade in SpeedGrade, and process audio files in Audition. I’m new to video editing/effects/grading, having had under one year of evenings and weekends spent on many failed projects and learning the hard way how simple things are done. That being said, I’ve never been an Apple guy (I think they’re overpriced for performance) so their laptops are out of the question for me.
My laptop of interest right now is Sager NP9570. Here’s my provisional build:
i7-4930K (6-core)
32GB Quad Channel DDR3 SDRAM at 1600MHz
Nvidia GeForce GTX 880M GPU with 8GB GDDR5 Video Memory
SSD1 (OS and Adobe CC): 120GB Samsung 840 EVO Series SATA3 Solid State Disk Drive
SSD2 (raw footage): 500GB Samsung 840 EVO Series SATA3 Solid State Secondary Disk Drive
SSD3 (projects): 500GB Samsung 840 EVO Series SATA3 Solid State Secondary Disk Drive
The screen is 17.3” and I am thinking of going with the 72% NTSC matte screen option, instead of the 90% NTSC glossy version. It’s not for wanting to work in blinding sun that I say this, but because I heard the 90% NTSC screen can wreck damage to your grading (please let me know if I’m wrong).
I should add I’m also planning to take it with me on long trips through SE Asia. It is heavy (essentially a desktop packed in a laptop), weighing 17 pounds including the ungodly 5-pound power brick. I will basically use it as a mobile desktop, lugging it around in my suitcase and leaving it behind in the hotel room, while I go out to shoot.
I appreciate your support and words of advice.
Serban

My suggestion is to go to ADK for real expert guaranteed computer building. They are probably the most qualified computer builders for Adobe Video products and they are very straight forward honest group to deal with

Help! Ideas for displaying ~100-300 still images with After Effects / Premiere Pro

Hi, I am a cadet at a US Air Force detachment and am responsible for making this semester's end of the year video.
I have the Adobe creative cloud and am familiar with the basics of Photoshop, and Premiere Pro, and I am trying to also learn After Effects. I have a large amount of picture and video, and am at a loss for how to quickly make all these pictures into an interesting slideshow. Software such as Cyberlink Powerdirector had a "photo grid" which would allow me to create an automatic slideshow of images on a 3x3 grid, where each image flashed into place one at a time. I am looking for automated processes or tutorials to feed my images into and have a modern effect of displaying the images.
If anyone has any idea for a template or where to start on handling a large amount of still images in After Effects or Premiere Pro, I could definitely use a point in the right direction!
Exactly what I want can be found at 5:27 of this video: https://www.facebook.com/photo.php?v=10150247563700519&set=vb.120583801339638&type=2&theat er

read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

After Effects & Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" (Win)

I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off the "Make text and other items larger or smaller" setting in Windows 7, since it causes some problems.
Please use this thread to let us know whether this solved a problem for you or whether there are any problems with this solution.

There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

Importing video into After effects, premiere pro and media encoder result in freezing

I have been trying to import a 17 minute long mp4 video shot with a go-pro into after effects and premiere pro with the result of the program locking up each time. My next thought was try to import it into media encoder and change the file format but it is causing media encoder to lock up as well. Any thoughts would be sincerely appreciated

Sounds like something might be fishy with the video file. You might try converting with different software, which can often be more forgiving than Adobe tools.
XviD4PSP 5.10.346 / 7.0.124 Beta
XMedia Recode 3.2.2.7

Graphics cards and After Effects, Premiere Pro, and Sony Vegas...which is best?

Debating between two EVGA cards for a new build.
I don't game at all, but I want the most kickass system I can for After Effects CS6, Premiere Pro CS6, and Sony Vegas.
Kepler option: http://www.newegg.com/Product/Prod [...] 6814130768
Fermi option: http://www.newegg.com/Product/Prod [...] 6814130687
Will spending more and waiting for Kepler net that much of a performance gain? Is there anywhere with good benchmarks on GPUs just for Adobe products and video editing? Which matters more and for what: OpenGL, Cuda, Memory Size, Clock speed?

It's not pointless. I know which cards are supported and which aren't. I'm not confused about which is supported. I know the 680 is not explicitly supported (yet?), but OpenGL and CUDA will still provide some benefit or no?
The GTX 580 and GTX 570 seem to "compute" far better than the GTX 680. I was kind of wondering real world what that mean for PP and AE and what it didn't mean.
I guess some of my interest is in understanding practically what a few more CUDA cores will do or what makes the OpenGL performance of a card better: Cuda, Memory Size, Clock Speed...what.
Ie, is the GTX 680 justified when it seems like it might not be a big enough bang for the buck.

After Effect / Premiere Pro CC 2014 Video Importing Conflicts

Why are my Adobe software packages not cooperating? PRes imported out of AE and into PPRO, but no die? Why?
Today I have a brand new MacBook Pro, I also have Adobe CC installed, predominantly for PremierePro and After Effects.
First issue - With ProRes video files exported successfully from Davinci Resolve not being imported into AE. After a few hours of failed attempts, head scratching and searching online I found I had to delete certain files from the hard drive / Quicktime folder (DVCPROHDCodec.component / ApplDVCPROHDCodec.compnent / etc) It seems now that AE has these codecs packaged into the application (?)
Anyway this worked! And I was able to import files in without 'after effects 86. error 4. reading file from frame'. Popping up endlessly.
Second issue - I work on an AE composition & try to export as a PremierPro file from AE, this works and I open with Premire Pro, but some video files on the timeline are missing (?)
So I decide to go the long route and export the composition as a single clip at ProRes from After Effects. I attempt to bring this clip into Premiere Pro and I get another error 'The importer reported a generic error'.
This is highly frustrating, I want to know what Adobe are doing to provide the relevant support for us enthusiastic movie makers and editors. I seem to spend most of my time trying to get my software packages working
with one another than making creative content and this really is unproductive and irritating, especially since these softwares are from the same company.

Go to HD/Library/Quictime and delete all .component files. It appears that the correct procedure is to delete all QT components and everything so far works. I have to do this every time I run after effects or Premiere Pro, and remember to put them back in again after shutting down software. Any ideas why this is happening folks?

Just installed mac os 10.9 and now i can't use After Effects CS6 - HEL

HELP! I am in the middle of a project!!!
You can't use this version of the application "Adobe After Effects CS6" with this verson of OS X.
You have "Adobe After Effects CS6" 11.0

Hi lulugrrrl,
Please refer the knowledge base article: http://helpx.adobe.com/after-effects/kb/effects-launch-mac-os-109.html.
Regards,
Romit Sinha

Can i use After Effects with FC4?! And how?

Hello! For a while i thought you could not use Adobe after effects with Final express...but i was wondering again if i can use it, and if i can, how do i use it with FCE?? Thanks!

Well after AE, i can continue editing it in final cut? Or once i use it in AE, it is too late to put the sequence or scene back into FCE?
I guess an example would be that if i just want one scene or one sequence from final cut to be used in AE, i would export that sequence as a QT movie? Then how do i put it back into Final Cut once it is done with AE?

Why I can't use Lumetri on Premiere Pro CC?

I've installed Premiere Pro CC and Speed Grade CC. I've seen the tutorial on adobe tv, but when I select 'lumetri' in the Adobe Premiere effects panel, and the little box opens so I can choose the Looks/LUT, I don't have any look to choose.
I've searched all over my computer and I don't have those files installed in my computer. How or where can I get them?

Jim
That's a different set of looks. For the LUT Ann is right. I just learned this all. To add a LUT to a clip or adjustment layer you have to go to Color Correction folder, then Lumetri and drag that to the clip. Then a dialog comes up asking where that is. Then you go to Program Files/Adobe/Adobe Premiere Pro CC/Lumteri/ and select the LUT you want. Also you have to make sure the ones for your camera are installed. For example I'm working with Sony F55 camera and had to get the LUT from Sony's site.

Can I use After Effects/Premiere Pro to change 29.97 to 23.97?

Similar Messages

Maybe you are looking for