Can i use airport express on a dell studio 1555 windows 7

Hi just wanted to know if i can use a usb data card and can i connect it to the airport express
if i have a pre existing wifi at home how can i use this airport express without installing it at home
can i use this to enhance the wifi signals from the existing network
can this be used on batteries or has this be mainly connected to the power supply ?

Hi just wanted to know if i can use a usb data card and can i connect it to the airport express
If you mean, can you connnect the AirPort Express Base Station (AX) directly to the PC via USB and gain Internet access, then the answer is no. If, on the other hand, you mean can the PC with a USB wireless adapter, gain wireless access to the AX, then the answer is most likely yes.
if i have a pre existing wifi at home how can i use this airport express without installing it at home
I'm not sure I quite understand your question. You can use the AX for both sharing a USB printer and/or for streaming iTunes with an existing wireless network. The AX would only need to be configured to "join" that wireless network.
can i use this to enhance the wifi signals from the existing network
Only if the existing wireless network is provided by another AirPort or Time Capsule.
can this be used on batteries or has this be mainly connected to the power supply ?
It has to be connected to an AC power source to work.

Similar Messages

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • Can I use AirPort Express as booster/extender to LinkSys router signal?

    I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room.  Can I use AirPort Express as a booster/extender?  Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys.  Which is it?  I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
    I've been hassling with this for over a month, and I'm extremely frustrated. 
    Thanks to anybody who can help me with this.

    Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

  • Can I use airport express to extend my network AND stream iTunes???

    I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
    My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
    Thanks!

    Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
    If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

  • Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

    Hi I was wondering :
    Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • Can I use Airport Express with iPhone in my hotel room?

    Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

    I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

  • Can I use airport express in a wired network to play music through my stereo?

    I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater.  This works, but there are some good days and some bad days where there are dropouts in the music.  I have recently run Cat6 cable to my HT from my router next to my MacPro.  This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc.  I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch.  I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE.  Is there a way to force the wifi on the AE off and just have it for streaming from iTunes?  Thanks.

    Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

  • I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

    I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
    is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

    Apple calls this configuration a ProxySTA.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can't use Airport Express after upgrading to Leopard

    I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
    I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
    I am open to suggestions to try a few things to get it working, so any help is appreciated.
    Message was edited by: a j

    From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
    Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

  • Can I use airport express with my osx 10.3.9

    I have osx 10.3.9 and would like to upgrade to to lion maybe and use airport express if possible .....what do I need to do?
    Oneday26

    So we know more about it...
    At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

  • How can I use Airport Express to create a standalone Wi-Fi network without Internet Access so I can browse web pages on the local network? I will be using MAMP as my server (Apache)

    I would like to create my own Wi-Fi standalone network at an upcoming tradeshow where there will be NO internet access.
    Currently, I run and develop sites on my iMac use MAMP to manage my sites locally. Using MAMP, I run my sites as though they are on the internet although everything is local.
    I purchased an Airport Express hoping I could create a standalone network so that the iMac would broadcast its website to whatever device connects to it such as my iPhone, iPad and MacBookPro.
    However, after setting up the network successfully (I have a green light on the Airport Express, and there is NO internet going through it), I  am  not able to go any further by logging into the iMac's websites from the other machines. Form my MacBookPro Finder, I can look at files and folders using afp://10.0.1.2, from the Find/Go/Connect to Server utility, but I can't browse the website that is running on the iMac via the Safari browser.
    Can anyone help me configure my MacBookPro (or iPad, or iPhone) to run the website on the iMac when they are all on the same network?
    Thanks so much!!

    1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
    2) create a new Wi-Fi network using the TC ?
    Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
    This is easy enough to do..
    Plug the TC directly into a computer.. without other connections to do the setup.
    Using the newly installed 5.6 utility.
    Bridge the TC.
    Create a wireless network.
    This is an older screen shot and I would set security to WPA2 Personal only not WPA/WPA2 Personal as shown above.
    I do recommend you use wireless names that are short, no spaces, pure alphanumeric.
    Update the TC..
    Now plug it into the modem router.. it will be a part of the network without doing NAT and DHCP itself.. which you do not want.. that leads to double NAT issues.. but it is a WAP that provides access to devices on both 2.4ghz and 5ghz bands directly to the main router.

  • Can I use Airport Express for printing and Ethernet printing at same time?

    I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
    1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
    2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
    Any help would be TOTALLY appreciated!
    Leigh-Ann

    Hello Kappy! Thank you for taking the time to reply to my question.
    I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
    -went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
    -In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
    -Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
    -Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
    -I got a dialogue box that asked about other installable features - clicked ok.
    -when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
    -I tried to repair permissions, but it did not resolve my issue.
    -I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
    I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
    Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
    Ethernet (Address: 08:00:07:84:78:e9)
    EtherTalk: PostScript
    NetWare: AutoSelect
    TCP/IP: AutoSelect
    IP address: 0.0.0.0
    And - now finally, to answer your questions (the best I can, that is)
    I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
    Should I have these cables hooked up differently?
    What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
    I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
    Thank you again.
    Leigh-Ann

  • How can I use my ipad in a hotel that only has ethernet connections.    The apple store clerk told me that I can't use airport express unless I also have a computer with me in the hotel.

    How can I use my Ipad in a hotel that only has ethernet connections?  The Apple store clerk told me that travel express won't work in my hotel unless I also have a computer.

    The issue with the Airport Express (or any of the Apple routers) is that you need the Airport Utility to configure it.  Airport Utility works on OSX and Windows, but not on the iPad (or iPhone or iPod Touch.)  It will work, if you can preconfigure the Airport correctly ahead of time, but you'd be stuck if you did need to reconfigure while at the hotel.
    You can use most any other router that is configured with a web page, which means you have a chance of configuring with Safari on the iPad.  If you want something somewhat portable, I use a "travel router" made by D-Link. The current model is the DAP-1350.  Other companies make similar travel routers, but I have no experience with the others.

Maybe you are looking for