Can I use Airport Express to connect device that needs wired ethernet to my wireless network?

I have DirecTV, which uses a broadband adapter to get its on-demand content off the internet. Time was my internet modem was near enough to the DVR that I could have an ethernet cable to the adapter. Now they are about 40 feet apart across the kitchen and living room. Is there any way I could use an Airport Express at the DVR as a wireless node to feed to the adapter through its ethernet port?

If the AirPort Express is an 802.11n version, and it has been configured to "extend" an Apple network, or "join" another wireless network, the Ethernet port is enabled, so an Ethernet device could be connected to the port on the Express.
Keep in mind that this will not be a true Ethernet signal, since it will depend on the quality of the wireless link between the main router and the Express.
There may....or may not....be sufficient bandwidth if you intend to download high definition movies, and your wireless network may really slow down when downloads are occurring, so CRMDVM's suggestion to understand the store's return policy in advance would be a good thing to investigate.

Similar Messages

  • I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

    I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
    is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

    Apple calls this configuration a ProxySTA.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can I use airport express without connecting to a router?

    I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

    You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

  • Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

    I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    The printer connects to the Airport Express through a USB hub and is recognized.  I cannot get the scanner nor either of the back up drives to be recognized.  Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro?  If it is possible, can you walk me through the set up for each? 
    Thanks,
    Doug Earle

    I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
    It will not work with a scanner, copier, or hard drive.
    It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
    The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
    But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

  • Can I use Airport Express (1st gen.) as a wired access point to my wifi Network

    Guys
    I'm using 10.8.4 with the older 6.3 airport utility. I have a Airport Express A1084 (1st. Gen).
    I'm trying to use it, connected to my wireless network, but have a wired ethernet cable from the Airport Express connected to a device. I tried connecting via wire to another laptop to access the web and it doesn't work.
    Any ideas if I can even do this, or do I just buy a new Express Airport. I just want to extend the network using my wireless to a wired device, but don't want to run a cable, because of the distance.
    Thank you
    John

    Bob, I hope you can help me too.  I have 4th generation (? - the flat, square model that was recently replaced) Time Capsule/Airport that I bought to extend my Verizon DSL dry loop modem/wireless signal througout the house and to the guest house.  I now know that it cannot be achieved due to Apple negligence in informing customers that the capsule will only extend from another apple airport product. 
    My question:
    Should I connect it via ethernet to my DSL modem and create a new network, but use the SAME network name, passcodes, etc?  Will that Strengthen my existing wireless signal or will both machines butt heads and duke it out, so to speak?
    B/C, I did have two separate networks going for about a year, different names for each network, and suddenly, the wireless part of the Verizon DSL modem died, and Verizon replaced the entire modem with the Actiontec modem.  So I am concerned that reconnecting the Time Capsule/Airport may damage teh Verizon modem, if that is why just the wireless part of the previous modem failed. 
    Suffice it to say, am very disappointed in the Time Capsule/Airport.  It replaced an older, bigger Western Digital external hard drive that was so easy to use and reliable; am still using it, but it has no wireless signal boost capability, so I purchased the Time Capsule/Airport. 
    Thank you for your help.

  • Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

    Hi I was wondering :
    Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • How can I use my ipad in a hotel that only has ethernet connections.    The apple store clerk told me that I can't use airport express unless I also have a computer with me in the hotel.

    How can I use my Ipad in a hotel that only has ethernet connections?  The Apple store clerk told me that travel express won't work in my hotel unless I also have a computer.

    The issue with the Airport Express (or any of the Apple routers) is that you need the Airport Utility to configure it.  Airport Utility works on OSX and Windows, but not on the iPad (or iPhone or iPod Touch.)  It will work, if you can preconfigure the Airport correctly ahead of time, but you'd be stuck if you did need to reconfigure while at the hotel.
    You can use most any other router that is configured with a web page, which means you have a chance of configuring with Safari on the iPad.  If you want something somewhat portable, I use a "travel router" made by D-Link. The current model is the DAP-1350.  Other companies make similar travel routers, but I have no experience with the others.

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • Can I use AirPort Express as booster/extender to LinkSys router signal?

    I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room.  Can I use AirPort Express as a booster/extender?  Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys.  Which is it?  I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
    I've been hassling with this for over a month, and I'm extremely frustrated. 
    Thanks to anybody who can help me with this.

    Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

  • I used Airport Base station and I was able to extend my network using airport express and connect my printers.  Now I am using Extreme and I can't extend the network (Express) or the printers nothing shows up.  I am using utility 6.3 and Mt Lion  What is

    I had an Aiport Base Station and extended using Airport Express, where I also connected my printers (network). Now using Airport Extreme off Mt Lion 10.8.4 and Utility 6.3.
    I can't extend the network (express) or connect my printers (USB) nor will it find my one wifi printer.
    What's up?

    For now, leave the AirPort Express powered off.
    Power off the entire network....all devices.....in any order that you want
    Wait a few minutes
    Power up the modem first, and let it run 2-3 minutes by itself
    Power up the AirPort Extreme next, and let it run a full minute
    Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
    Open AirPort Utility and check to see if the AirPort Extreme is visible.
    If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
    Post back on your progress.

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can I use airport express to extend my network AND stream iTunes???

    I have an airport extreme connected to the cable modem and sending a signal out to my home network. I also have a powerbook and an airport express connected to the home stereo.
    My question is, can i use the express to extend my extreme signal (to reach the back yard) and stream music from itunes at the same time? The set up utility seems to suggest that you do one or the other.
    Thanks!

    Are you sure you configured the Express to extend the Extreme's network? If you use the standard setup, the two base stations will be indistinguishable, i.e. you'll only see one entry for the wireless network.
    If you were connected to the Extreme when you configured the Express, try turning off Airport in the Airport menu and then turning it back on. The computer should pick up the stronger signal at that point.

Maybe you are looking for

  • Mail crashes every time I open after 10.5.1 update

    Every time I open mail it just crashes right away. I've tried repairing permissions, tried shift click, and also tried from a different/new user account. Any ideas? I have been having the same problem with iCal since I installed leopard but I don't u

  • Get selected rows using the fm REUSE_ALV_GRID_DISPLAY_LVC

    FYI ... for all those developers trying to select multiple rows in an ALV report, and get the selected rows - without using the OO approach to display to ALV, and without using checkboxes in the function module approach.  First off, you need to use t

  • Temp Deployments in Weblogic 5.1

    Hi, While deploying a JAR in Weblogic 5.1, it automatically copies the jar into a tmp_deployments directory...and, loads it from there to make sure that we have the original copy for modifications. Is there a way we can tune weblogic to stop this ??

  • [SOLVED] What visudo change for echo-ing a system parameter?

    according to Wiki, backlight can be set by echo 5 > /sys/class/backlight/acpi_video0/brightness but only as root. What change to do with visudo to allow user to set value? Last edited by dabbi2000 (2012-02-03 08:13:22)

  • Unable to upload photos to MobileMe

    Hi all, I've enabled the 'adding of photos via email or iphone' setting in my web gallery, yet when I take a photo and use the 'send to MobileMe' option on my iphone, I get 'Your MobileMe gallery has no shared albums'. But it does. Anyone have any id