Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

Similar Messages

  • Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

    Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • How to use Airport Extreme to create a second wireless network with different IP addresses behind an existing modem/router?

    Hi,
    I have an existing modem/router from my ISP that does DHCP and NAT with base IP 192.168.1.1 distributed in the wireless network. I use this wireless network for our private devices. I could turn off the DHCP server in this first router, but there isn't a separate setting to turn off NAT.
    I want to connect my Airport Extreme (4th gen) to this existing router to create a separate wireless network for visiting guests, where IP addresses of 10.0.0.0 etc. are used. So I do not want to use the Airport Extreme in bridge mode, as I would like to keep the devices on the first network 'invisible' for those on the second network. (P.S. when connected in bridge mode, the Airport works well and can distribute a network with a different name from the first. It's just that I would feel more comfortable about our privacy if the Airport were to distribute a different IP range. False security, maybe?)
    I've tried doing this by 'Sharing a public IP address' in Airport Utility's Internet tab, leaving TCP/IP's setting to 'via DHCP', setting DHCP addresses to start with 10.0.0.2 up to 200 with all else blank, and not using a standard host nor NAT-PMP in the NAT tab.
    When I do this the Airport complains of a 'double NAT issue'. Internet connectivity seems to be OK, but when switching between the two networks on my Mac I get complaints about my IP address being in use by another device intermittently.
    Can anyone help in how to get the 'double NAT issue' resolved?
    Thanks!

    So if someone is connected to the modem/router network they will be able to see the HD I will have put in to the AirPort Extreme?
    As I said above.....since the modem/router and AirPort are bridged, devices on the modem/router wireless will be able to "see" devices on the AirPort wireless, and vice versa.....
    If they can see the HD connected to the AirPort Extreme, will they be able to access it
    Yes, unless you plan to password protect the drive connected to the AirPort Extreme.
    or will they still need the password needed to get onto the AirPort Extreme network?
    The modem/router and AirPort Extreme are bridged. They are on the same network. All devices are on the same network when the modem/router and AirPort are bridged. Not sure how else that I can say this.
    Also, because it is bridged, I shouldn't have any problems accessing the HD I will have connected to the AirPort Extreme from an external location?
    Accessing devices from a remote location is never easy....and a topic for a different post/discussion. If you have a "static" Internet IP address from your provider, and have all the details on how to forward ports on your modem/router, you are off to a good start.
    Apparently there is some addressing issues because devices can be seen as "Double IP" because the modem/router would have allocated IP's as well as the AirPort allocating IP's thus making connections slower until resolved
    When you "bridge", all IP addresses are issued by one device. There will be no conflicts on the network, since they are bridged.
    Once again, in very simple terms, you have two doors (access points) that open into the same room (network).  One "door" is the modem/router and the other "door" is the AirPort Extreme. They are on the same network....("room") because they are bridged.

  • How can I use Airport Express to create a standalone Wi-Fi network without Internet Access so I can browse web pages on the local network? I will be using MAMP as my server (Apache)

    I would like to create my own Wi-Fi standalone network at an upcoming tradeshow where there will be NO internet access.
    Currently, I run and develop sites on my iMac use MAMP to manage my sites locally. Using MAMP, I run my sites as though they are on the internet although everything is local.
    I purchased an Airport Express hoping I could create a standalone network so that the iMac would broadcast its website to whatever device connects to it such as my iPhone, iPad and MacBookPro.
    However, after setting up the network successfully (I have a green light on the Airport Express, and there is NO internet going through it), I  am  not able to go any further by logging into the iMac's websites from the other machines. Form my MacBookPro Finder, I can look at files and folders using afp://10.0.1.2, from the Find/Go/Connect to Server utility, but I can't browse the website that is running on the iMac via the Safari browser.
    Can anyone help me configure my MacBookPro (or iPad, or iPhone) to run the website on the iMac when they are all on the same network?
    Thanks so much!!

    1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
    2) create a new Wi-Fi network using the TC ?
    Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
    This is easy enough to do..
    Plug the TC directly into a computer.. without other connections to do the setup.
    Using the newly installed 5.6 utility.
    Bridge the TC.
    Create a wireless network.
    This is an older screen shot and I would set security to WPA2 Personal only not WPA/WPA2 Personal as shown above.
    I do recommend you use wireless names that are short, no spaces, pure alphanumeric.
    Update the TC..
    Now plug it into the modem router.. it will be a part of the network without doing NAT and DHCP itself.. which you do not want.. that leads to double NAT issues.. but it is a WAP that provides access to devices on both 2.4ghz and 5ghz bands directly to the main router.

  • How can I use airport express to over-ride TWC wireless ubee?

    I currently pay Time Warner Cable $6 a month for the wireless feature of their regular internet service, administered via a ubee modem. I want to cancel this service and instead run my wifi through an Apple Airport Express. But when I plug it in and try to use it, it flashes amber (I gather I need to disable the TWC wifi first, but don't know how to do this and TWC are reluctant advisors.)
    Any help greatly appreciated.

    It is always a good idea to perform a complete power recycle of your networking equipment any time you make hardware configuration changes.
    Please try the following:
    Power-down the modem, AXn and computers; leave them powered-down for 10-15 minutes. Note: Power-down order is not critical.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AXn; wait at least 5-10 minutes. Note: The AXn may continue to flash amber as it may still require some additional configuration changes (like enabling wireless security) before it will go solid green.
    Power-up your computers.
    Wireless clients, connected to the AXn, should now be able to access the Internet. Please post back your results.

  • Can I use Airport Express to make my G3 wireless?

    I have an old iMac G3 400MHz running Panther. I don't expect it to be around for long and so it's not worth installing an Airport card, but I still want to connect it to my wifi router.
    A friend has lent me an Airport Express, and says it's possible to receive a wifi signal if I connect it to the G3 using an ethernet cable. In effect, the AE will be acting as the iMac's wireless dongle.
    Clearly, if it's got any chance of working then I have to be able to enter the router's ID and password in the AE. I've installed the software that came with it, but it won't let me open the Airport setup program. It just says I've got no Airport card and then gives me only a Quit option.
    Any help appreciated. Happy Christmas to all Mac users!

    Welcome to the discussions, Nick!
    If you have a router there broadcasting a wireless network, it may be possible for the AirPort Express to "Join" that network.
    Using your Mac with Snow Leopard installed, temporarily connect an ethernet cable from your computer to the AirPort Express and power up the Express.
    Open Hard Drive > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Wireless tab below the row of icons
    Do you see an option to "Allow ethernet client" under the Wireless Network Name?
    If so, you should be able to set this up as you want and see below for setup. If not, it's probably not going to work and a lot more info will be needed.
    Wireless Mode would be "Join a wireless network"
    Wireless Network Name would be the name of your wireless network there
    Make sure there is a check mark next to "Allow Ethernet Clients"
    Wireless Security is the exact setting that your wireless network is now using
    Wireless Password is the exact setting that your wireless network is now using.
    Update to save settings.
    Move the Express to the desired location and connect an ethernet cable from it to your old iMac and power things up.
    Any luck?

  • Can't get AirPort Express to join LINKSYS WRT54G wireless network

    After several unsuccessful attempts to follow Tesserax's advice to get my AX to join my LINKSYS wireless network, I depressed the reset button, plugged the AX in, and waited for the flashing reset confirmation. Reconfiguring from scratch to join my WPA network, all seemed to go well. After selecting to Update, the following window pops up:
    <The settings for this AirPort Express have been successfully updated. You can close this window or wait for this AirPort Express to restart.
    Waiting for the AirPort Express to restart…>
    After a couple of minutes the following window appears:
    <AirPort Utility was unable to find your AirPort Wireless device after restarting.
    The settings for this AirPort wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the AirPort wireless device. You may need to select your network from the Wi-Fi menu and try again.>
    At this point, AirPort Utility will no longer recognize the AX, no matter how many times I rescan. The only way I can get it to be recognized is to once again do a hard factory reset. I then go through the whole set up process again, only to end up in the same dead end. I'm thinking that there has to be some sort of problem between the AX and the LINKSYS. Prior to the above activity, I was able to send iTunes to the AX just fine. I just wasn't able to surf the Internet at the same time.
    Any ideas you might have will be appreciated.

    Thomas - I have a very similar problem - I've got a Wi-Fi/ADSL2 router supplied by my telecom company AirTel (the router's called 'beetel', 802.11g model) and I'm having problems extending it with Airport Express - the Airport Utility doesn't seem to be able to detect the AE after restart. The only difference with your case seems that you have a Linksys piece.
    Here's what I tried:
    1. Had my Wi-Fi network up & running with the beetel router (network name: PASTA)
    2. Booted Airport Express
    3. Launched Airport Utility 5.5.3 from Windows 7, detected the Airport Express, chose Manual Setup and went for option "Extend my Wireless Network" and chose PASTA and specified its password
    3. Airport Utility restarted the device after saving changes, and Aiport Express went invisible.
    That sounds like the same problem you had.
    Just to cross check, I tried connecting an Ethernet cable between AE and the beetel router and went for option "Create Wireless Network" and that was a breeze.
    @Tesserax - can Airport Express smoothly extend only an Airport Extreme WiFi network? Is there anything I can do to extend my current Wi-Fi network from this router?
    Thanks for your notes & time
    Forrest

  • Using Airport Express to boost range of wireless network

    I have a Virgin wireless broadband connection (using a netgear router), but the range is poor and so want to set up my airport express to boost the range of the network. This option is available in Airport Utility, but when I try to set it up, once I've inputted my WPA password a dialog box on top of the main screen pops up asking me to select from the list of Apple wireless devices. Annoyingly, the Express device doesn't show up in the dialog box, although I can see it showing up in the main Utility screen behind it. I can set it up to play iTunes etc. no problem - any ideas what I'm doing wrong?

    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your Netgear router can be extended wirelessly with the AirPort Express Base Station (AX).
    The only Netgear, that I'm aware, that is supposed to be compatible, is the Netgear WGR614 with v6 firmware.

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

    How can I use Airport Express (1st Generation) with OS X Mavericks?

    1st Generation AirPort Express will work fine with Mavericks.
    Are you sure that you have a 1st Gen Express?
    Check the model number on the side of the Express. 1st Gen is A1264.
    If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
    Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

  • Can I use AirPort Express as booster/extender to LinkSys router signal?

    I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room.  Can I use AirPort Express as a booster/extender?  Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys.  Which is it?  I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
    I've been hassling with this for over a month, and I'm extremely frustrated. 
    Thanks to anybody who can help me with this.

    Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

  • Using the AirPort Express to Join an existing Wireless Network

    Hello,
    I am hoping you can provide me with some help on this... I recelty acquired a PowerMac G4 with a 450 MHz processor, CD-RW/DVD-ROM drive, Zip Drive, 1 GB RAM, and two 40 GB HD... The system has OS 10.4 installed, and it is has built-in Ethernet...
    I was told I could use the Airport Express to connect to an existing wireless network, so I purchased an Airport Express base Station... Thing is, to e honest, I am having a bit of a problem getting started...
    - First, to connect from the AirPort Express to my G4, do I need a special kind of Ethernet cable, or will the usual kind do?
    - Second do I need to istall the software first, or have the Airport express connected to the G4 before I do?
    How would I go about setting this up, step-by-step?
    Any information would be appreciated...
    Thanks for your time...

    OK, thanks. Hopefully, the Netgear is creating a wireless network using WPA/WPA2 security. That will make it much easier for the AirPort Express (AX) to join the wireless network. It can join networks with using WEP security, but password issues almost always arise using WEP.
    Since you must enter the exact security settings and password for the wireless network, it would help tremendously to know this in advance. Otherwise, it's going to be a series of "trial and errors" and likely frustration, later on.
    When you have a moment, check the security settings on the Netgear router.
    It might be one of the following: WPA2 Personal, WPA/WPA2 Personal, WEP 128, WEP 40.

  • Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7.

    Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.)  I gave the Airport a hard re-start, so I don't think that is the issue.  Using Windows 7 Ultimate

    Looks like I fixed it., thanks to another post I read.  I went into my Norton Security.  Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow"  This also fixed my error (-3212) which would not allow me to connect to the iTunes store. 

  • HT1515 Can I use AirPort Express product to add a wi fi outlet to my ethernet Lan?

    Can I use an Airport Express to add a wif fi outlet to my etehrnet (wired) Lan ... I don't have wi fi!

    This should work if you configure the AirPort Express to create a wireless network....the same type of setup that you would use for example, if the Express was connecting to the Ethernet jack in a hotel room.
    However, should work does not mean to imply that it will work.
    Here, I am assuming that the "main" router on the Ethernet LAN network has been configured to allow another router to connect to the network.

Maybe you are looking for