Can I use airport express without connecting to a router?

I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

Similar Messages

I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
The printer connects to the Airport Express through a USB hub and is recognized. I cannot get the scanner nor either of the back up drives to be recognized. Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro? If it is possible, can you walk me through the set up for each?
Thanks,
Doug Earle

I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
It will not work with a scanner, copier, or hard drive.
It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

Can I use Airport Express to connect device that needs wired ethernet to my wireless network?

I have DirecTV, which uses a broadband adapter to get its on-demand content off the internet. Time was my internet modem was near enough to the DVR that I could have an ethernet cable to the adapter. Now they are about 40 feet apart across the kitchen and living room. Is there any way I could use an Airport Express at the DVR as a wireless node to feed to the adapter through its ethernet port?

If the AirPort Express is an 802.11n version, and it has been configured to "extend" an Apple network, or "join" another wireless network, the Ethernet port is enabled, so an Ethernet device could be connected to the port on the Express.
Keep in mind that this will not be a true Ethernet signal, since it will depend on the quality of the wireless link between the main router and the Express.
There may....or may not....be sufficient bandwidth if you intend to download high definition movies, and your wireless network may really slow down when downloads are occurring, so CRMDVM's suggestion to understand the store's return policy in advance would be a good thing to investigate.

Can i use airport express to extend a fios router?

Trying to extend an ActionTec router with Airport Express and am having trouble. Is it possible to achieve or do I need an Extreme base station in order to extend the signal? Thanks.

Douglas Parent wrote:
... do I need an Extreme base station in order to extend the signal?
Yes. An AirPort can only "wirelessly extend" another AirPort.

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Using Airport Express without a modem

Can you set up a wireless network using Airport Express without a modem? I want set up a wireless network at work. Can I just plug in the ethernet cable on my desk to Airport Express for it to work? Thanks.

Hello Low77. Welcome to the Apple Discussions!
Can you set up a wireless network using Airport Express without a modem?
Yes. By default, the AirPort Express Base Station (AX) will create a stand-alone wireless network which you can connect up to 10 wireless clients for file or printer sharing.
Can I just plug in the ethernet cable on my desk to Airport Express for it to work?
You do not need to plug it into an Ethernet cable for it to work. However, if you require network or Internet access, the Ethernet cable needs to be connected to a network or have Internet access.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?

How can I use AirPort Express when traveling?
Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
If the hotel only provides wireless service, then a single AirPort Express will not help you.
However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Can I use AirPort Express as booster/extender to LinkSys router signal?

I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room. Can I use AirPort Express as a booster/extender? Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys. Which is it? I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
I've been hassling with this for over a month, and I'm extremely frustrated.
Thanks to anybody who can help me with this.

Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

I used Airport Base station and I was able to extend my network using airport express and connect my printers. Now I am using Extreme and I can't extend the network (Express) or the printers nothing shows up. I am using utility 6.3 and Mt Lion What is

I had an Aiport Base Station and extended using Airport Express, where I also connected my printers (network). Now using Airport Extreme off Mt Lion 10.8.4 and Utility 6.3.
I can't extend the network (express) or connect my printers (USB) nor will it find my one wifi printer.
What's up?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

Can I use airport express in a wired network to play music through my stereo?

I originally used my 1st gen AE to wirelessly stream music from iTunes on my MacPro to my home theater. This works, but there are some good days and some bad days where there are dropouts in the music. I have recently run Cat6 cable to my HT from my router next to my MacPro. This feeds a Gigabit switch that feeds the ATV, receiver, bluray, HD DVD, etc. I plugged in the AE to the switch but it still defaults to the wifi network rather than taking a feed from the ethernet switch. I know i can (and do) use the ATV (gen 1) to steam music, but sometimes it more convenient to use the AE. Is there a way to force the wifi on the AE off and just have it for streaming from iTunes? Thanks.

Yes, you can configure an AirPort Express Base Station (AX) as a standalone wireless router without Internet access for the purposes of providing a Wi-Fi network for streaming. Note that any computers that will be the host of that stream would need to connect to this AX's wireless network while doing so. They would not be able to be connected to two wireless networks simultaneously for both streaming AND Internet access.

Can i use airport express on a dell studio 1555 windows 7

Hi just wanted to know if i can use a usb data card and can i connect it to the airport express
if i have a pre existing wifi at home how can i use this airport express without installing it at home
can i use this to enhance the wifi signals from the existing network
can this be used on batteries or has this be mainly connected to the power supply ?

Hi just wanted to know if i can use a usb data card and can i connect it to the airport express
If you mean, can you connnect the AirPort Express Base Station (AX) directly to the PC via USB and gain Internet access, then the answer is no. If, on the other hand, you mean can the PC with a USB wireless adapter, gain wireless access to the AX, then the answer is most likely yes.
if i have a pre existing wifi at home how can i use this airport express without installing it at home
I'm not sure I quite understand your question. You can use the AX for both sharing a USB printer and/or for streaming iTunes with an existing wireless network. The AX would only need to be configured to "join" that wireless network.
can i use this to enhance the wifi signals from the existing network
Only if the existing wireless network is provided by another AirPort or Time Capsule.
can this be used on batteries or has this be mainly connected to the power supply ?
It has to be connected to an AC power source to work.

Can I use airport express without connecting to a router?

Similar Messages

Maybe you are looking for