Can i use airport extreme, with apple tv and pc without the internet

While renting/buying films on itunes is all well and good, my wireless capacity is poor, if i buy airport extreme, without connecting it to the internet, will it stream my films on itunes from the PC to apple TV?

...if i buy airport extreme, without connecting it to the internet, will it stream my films on itunes from the PC to apple TV?
Yes. An Internet connection is not required. However, of course, the AirPort or your Apple TV will not be able to stream content from the Internet.

Similar Messages

  • Using airport extreme with apple tv

    Hi, I am by no means an expert on these matters so, I thought I would put my question out there for the experts to comment on. I currently use 2 Apple TVs on my wifi network and am wondering if I connect the Apple TVs via ethernet cable to an airport extreme, would it improve the download and streaming of content to the Apple TVs?
    Current system, iMac OS X Yosemite 10.10.3 (14D136), 3.1 GHz Intel Core i5, 16 GB 1333 MHz DDR3, ADSL internet, network has good coverage throughout the area. Many thanks.

    It can't improve upon the bandwidth delivered by your ISP, but what it will do is avoid the vagaries of wireless communication. Whenever practicable, use Ethernet. The AppleTV will automatically favor Ethernet over Wi-Fi.

  • Can I use Airport Extreme with a westell 7500

    I have Verizon DSL with a Westell 7500.  Can I connect the Airport Exreme as the router and
    use the 7500 as a modem only?

    When you configure the Westell device for simple bridge mode operation, it will no longer provide the PPPoE connection credentials, so you will need to setup the PPPoE connection on the AirPort Extreme.
    AirPort Utility - Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = PPPoE
    Enter your ISP user name...(probably your email address).... and password
    Leave the Service Area name completely blank
    Connection = Always On
    Disconnet if Idle= Never
    Update to save settings
    Power down the entire network
    Wait a moment or two
    Start the modem first, let it run a minute or two by itself
    Start the AirPort Extreme next the same way
    Continue starting devices one at a time about a minutes apart until everything is powered back up

  • Can I use Airport Express with Comcast router and Apple TV?

    I want to connect my iPod Touch (version 8.1.2) to a home stereo wirelessly.  I am considering getting an AE Base Station.  I have a Mac mini running OSX 10.9.5 connected wirelessly using a Comcast router.  I also have an Apple TV, which I have not yet connected to my TV.  Here are some questions.
    Are there any problems with doing this.  In particular, can I continue to use the Comcast router?
    Also, I have seen some comments saying that the cable modem slowed down when AE was added.  Is that true?  Thanks,
    Owen

    The stereo doesn't have wireless (or bluetooth).
    My understanding is that the iPod Touch has a built-in airplay transmitter.
    If so,  connecting the AE Base Station to my stereo would allow sending music from my iPod to my stereo.
    Is that correct?  Thanks.
    Owen

  • Can i use airport extreme as wifi range extender in conjunction with a Linksys AE4500 router

    can i use airport extreme base station as wifi range extender in conjunction with a Linksys AE4500 router

    If you are trying to "extend" using wireless only......Apple tells us that their "extend a wireless network" feature is designed to only work with other Apple routers.
    So, in order to use your AirPort Extreme as an extender, you would need to have another Apple router.....an AirPort Express, Time Capsule, or another AirPort Extreme as the main base station.
    I haven't tested the specific Linksys model that you have, but have owned and worked with several other Linksys models, none of which were compatible with Apple for the purpose that you ask about....so I would have to say that it is extremely unlikely that your model would be compatible with the AirPort Extreme.

  • Can you use airport extreme as a bridge to netgear wdnr4500 wireless router

    can you use airport extreme as a bridge with a netgear  wndr4500 router.I need to extend my wireless connections to the other side of the house

    can you use airport extreme as a bridge with a netgear  wndr4500 router.
    This is extremely unlikely. The AirPort Extreme can provide this function with other Apple routers, but as far we know, it is not compatible with products from other manufacturers for this purpose.
    Suggest that you use a Netgear product for the best chance of compatibility.

  • Can I use AirPort extreme to play musik on my sterio

    Can I use AirPort Extreme to play music from Itunes, on my sterio? Or is it just AirPort Express.?

    Express only. Only the Express has a audio jack.
    Welcome to Apple Discussions!

  • Can you use airport extreme 802.11n for files backup

    Can you use airport extreme 802.11 for files back up and sharing

    You can if you connect a hard drive that has been formatted correctly to the USB port on the AirPort Extreme.
    Apple does not officially support Time Machine backups for this type of setup, but you could store regular files this way.

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

    Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

    I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or  as a Time Machine backup drive.
    Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After  you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
    Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
    Roger

  • How can i use jpg extension with forms 10g and webutil

    I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
    image jpg and image item has no jpg extension .
    How can i use jpg extension with forms 10g and webutil ?

    You can use the JFIF image format for jpg files.

  • Face time with wifi only.  I have a 4Gs iPhone traveling to Japan.  Can I use face time with another 4Gs or IMacback in the States using just wifi and with I have my Celluar Data and Data Roaming off?

    Face time with wifi only.  I have a 4Gs iPhone traveling to Japan.  Can I use face time with another 4Gs or IMacback in the States using just wifi and with I have my Celluar Data and Data Roaming off?

    Thanks,  After changing my settings in face time per your suggestion, (it needed to be done),  I turned off cellular data and data roaming and made a call using face time.  It worked!  Great way to stay in touch while overseas without the need for those egregious phone data plans. 

  • Can I use my iPhone with my Mac and PC's iTunes?

    Can I use my iPhone with my Mac and PC's iTunes interchangeably?
    Will it erase all my songs?
    I am assuming since both versions of iTunes (Mac and PC) are registered under my email it's okay--- would that be right?
    I don't want to have to put back each song again
    thanks in advance!
    aaron

    With the iPhone, you can sync all iTunes content with only one computer. Trying to sync iTunes content with a second computer will result in iTunes erasing the content from the first computer. However, non-itunes content such as contacts, calendars, mail settings, notes, etc. (anything in the Info pane) can be synced from another computer.

  • Can i use airplay if my apple tv is connected to the network by ethernet cable?

    Can I use Airplay  if my Apple tv is connected to the network using an Ethernet cable as apposed to a WiFi connection.

    Thanks. I therefore have a problem as I cannot connect my ipad to the Apple TV. When trying to connect via Airplay my other apple tv appears (that is connected only via WiFi and that connects OK) but the Apple tv connected via the Ethernet does not show. I have looked at all the settings on both apple TV's and the only difference I can see is one is connected via WiFi and the other through Ethernet cable. Any ideas on what I need to check out?

  • Why I can't use my 2finger to drag up and down in the Pages App

    Why I can't use my 2finger to drag up and down in the Pages App. I can in all other apps.

    You will need to do what it says, contact iTunes support. Click the Support tab above, then the link in the Contact Us area and you'll be guided.
    Regards.

Maybe you are looking for

  • Problem with OM...

    when a manager has 2 positions, it doesn't seems that the manager is caught for both org units. he has 2 positons, 50% each. eg: when we run variant INDIA in HP1-001. the manager for org unit IT_PLM is blank, but is in reality Chrisanth Jebakumar wit

  • Forgotten administrator name and password

    Hi all i have mac  OS X Lion 10.7.5 (11G63), but longtime back i kept lock for any changes to be made on my mac. Unfortunatly I lost my Adminstratot name and password .Now i cannot even update my OS in Mac How do i over come this hurdle. Please Reply

  • Export 64,000 images

    I have over 64,000 images in my Aperture library at present (with another 70-80,000 to be added). A lot of these images have adjustments, crops, caption changes etc. I now need to export all of them as I am moving from one on-line archive service to

  • HELP with Interactive Booklets purchased thru itunes

    I have a 30 gb video ipod. A few of the albums I have purchased through itunes have an interactive booklet attached. When I sync my ipod with itunes, it says my ipod model can not support the interactive booklets. As a result I can't view them. Does

  • Syncing iTunes TV Shows

    I have a 30 GB 5th generation iPod. Paid for the first season of Ugly Betty. See it all in my Purchased Folder. When I sync, I have folders for Music, Photos, Videos, Extras but no TV Shows and can't drag the Purchased TV Shows onto My iPod either as