Can I use an adapter for USB 2.0 on my SP 6100?

Hi
I have a Satellite Pro 6100 and it uses the older USB 1.1 and when I plug anything modern into it it says "this can perform faster". Is there an adapter you know of that I could use?
Thank you.

Hi,
yes there is something like an adapter:
http://www.transcendusa.com/products/ModDetail.asp?ModNo=32
Its an Cardbus-to-USB adapter which gives you the ability to run USB 2.0 devices over the cardbus port which is integrated in your Satellite Pro 6100.
Greetings

Similar Messages

  • Can I use the lightning to USB cord with any USB/AC adapter?

    Just got a new IPhone 5.  Can I use the lightning to USB cord with the AC adapter I had for my IPhone 4 (or any other USB to AC adapter)?

    Yes I just check and the one for my MacBook fits my 12 Watt iPad charger.

  • Can I use a 10 ft USB extension for my HP printer?

    Can I use a 10 ft USB extension for my HP printer?

    USB 1.1/2.0 specifies a maximum cable length of 5 meters (~16 feet) - http://photo.stackexchange.com/questions/8679/whats-the-maximum-length-of-usb-ca ble-that-you-can-use-for-tethering

  • Can I use iphone as external USB analog modem for dialing into switches?

    Can I use iphone as external USB analog modem for accessing data switches?
    I want to use hyperterminal but don't have a land line to use and wanted to use my iphone as my hard land line..this isn't for tethering for internet access...make sense?

    apple store sale guy said this set up will work but it did not. just bought my TC last monday.

  • Can I use an adapter to get thunderbolt on my early 09 MacBook pro

    Can I use an adapter to get thunderbolt on my early 09 MacBook pro?

    No.  ThunderBolt is a direct connection to your systems PCI Express bus.  There is no way for your existing ports to do this with any sort of external adapter.

  • Can i get an adapter for macbook to make hdmi port?

    can i get an adapter for macbook to make hdmi port?

    Yes, but the one you need depends on the specific MacBook you have.
    Earlier MacBooks use a Mini-DVI and later ones use a Mini DisplayPort for their video output. To find out which MacBook you have, go to the  (Apple menu) and choose About This Mac. Click More Info... and in the System Profiler window that opens, choose Hardware. Your Model Identifier will be shown.
    For MacBook1,1 though MacBook4,1 choose a Mini-DVI to HDMI Adapter
    For MacBook5,1 and later choose a Mini DisplayPort to HDMI Adapter
    Either one is commonly available for less than $10.

  • Can I use SQL developer for a Sybase IQ migration to Oracle?

    Hello,
    Can I use SQL developer for a Sybase IQ migration to Oracle?
    Currently in the supported list appears only Sybase Adaptive Server 12 and 15.
    Thanks,
    Florin D.

    Sorry, we don't support IQ migrations at this time.

  • When & Why to Use WL Adapter for MQSeries as compared to MDB?

              We have a need to both send and receive message via MQSeries in asynch mode.
              Initial assessment was to receive messages via MDB and send messages by use a
              pool of Sessions to the MQ Mgr connection.
              Given this why should one use WL Adapter for MQ?
              Thanks
              Tariq.
              

    I assume you are referring to the "WLI" adapter? Perhaps try posting
              your question to the "weblogic.integration.developer" or
              "weblogic.integration.interest" newsgroup.
              If you are referring to the "Messaging Bridge", which comes with
              WebLogic server, then the advantage is that MQ need not be up for the
              senders to continue sending. Senders can send messages to a WebLogic
              queue, which the bridge can in turn forward to an MQ queue. The
              disadvantage is that the extra bridge hop may slow down your app.
              Tom, BEA
              P.S. You are likely by now aware that WL 8.1 (just released in beta),
              can automatically pool foreign (or WebLogic) sessions for you.
              Additionallly, it provides help in that you can configure wrappers for
              foreign JMS objects. See "Accessing JMS Foreign Providers" and
              "Accessing JMS via Servlets and EJBs" listed under new features:
              http://e-docs.bea.com/wls/docs81/notes/new.html#1125379
              Tariq Bhatti wrote:
              > We have a need to both send and receive message via MQSeries in asynch mode.
              > Initial assessment was to receive messages via MDB and send messages by use a
              > pool of Sessions to the MQ Mgr connection.
              >
              > Given this why should one use WL Adapter for MQ?
              >
              > Thanks
              > Tariq.
              >
              

  • How run reports JDE from BPEL using the Adapter for JD Edwards OneWorld?

    Hi,
    I need to load on line a lot of invoices from Bpel to JD Edwards using the Adapter for JD Edwards OneWorld (iWay).
    Using Business Functions as Web Services it wasn't a not good idea because of this Adapter is poorly constructed and doesn't allow simultaneous loads, a memory leak occurs on JDE server. And to load them invoice by invoice is very slow.
    A choice is to use Z tables and load them through schedules, but Bpel loses total control.
    I heard that I can run processes reports that enable to extract the data from the Z tables and load them into JDE.
    How can I execute reports JD Edwards invoked from BPEL using the Adapter for JD Edwards OneWorld?
    Thanks
    Francisco

    Hi Dario,
    BizTalk 2013 R2 (JDE LOB Adapter) is not tested against latest release of JDE EnterpriseOne 9.1.
    It only supports with 8.12 and 9.0 version of JDE.
    Refer the discussion here:
    Integrating BizTalk with JDE EnterpriseOne
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Can I use Hardrive enclosure for DVDRW Drive

    Hi All,
    Can I use an external Firewire/USB Hardrive enclosure for a Pioneer DVR-109 drive. It obvisously will not fit in the actual enclosure, but can I use the interface connection and power plug, just to test the drive and perhaps flash the firmware on a PC, before I actually put it in my iMac?
    I have an AcommData Ultra ATA 133 firewire/USB2 External enclosure and a Pioneer DVR-109. Thanks

    ya actualy i tried the exact same thing with my hardrive enclosure as long as it's an ide or you can plug it in it should work great.

  • Wanted 'Using Sap Adapter for Connector Framework' document

    dear friends
    I want to display ABAP reports in iView without Transaction iView.
    From the below forum link
    /community [original link is broken]
    i came to know i can get the help from 'Using Sap Adapter for Connector Framework' document, but the link is giving
    404
    The requested resource is not available.
    can anybody help me to find out the document
    thanx in advance
    please reply me at the earliest.
    kantha

    have a look here - should help:
    http://help.sap.com/saphelp_nw04s/helpdata/en/f2/db49421c0b3c54e10000000a1550b0/frameset.htm
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/f2/db49421c0b3c54e10000000a1550b0/frameset.htm">sap help portal</a>
    you may also download PDK, there are some samples in it.
    Best Oliver

  • Can i use iphone as a usb or storage device

    can i use iphone as a usb or storage device

    No.
    There are some 3rd party apps that provide for transferring select data via the iTunes sync process or via wi-fi when the computer and iPhone are connected to the same wi-fi network, but disk mode is not supported with the iPhone.

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Can I use touch ID for App Store without using a passcode?

    It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

    From the article:
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
    In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
    After restarting your iPhone 5s
    When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
    To enter the Touch ID & Passcode setting
    and
    You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
    you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
    Regards,

Maybe you are looking for

  • Help for a Beginner's Program

    Hello, I'm fairly new to the Java language. Recently I was writing a program revolving around the creation of classes and constructors...my code looks like this: import java.util.Scanner; class Money{      private static int dollars, cents;      Mone

  • Camera raw opening in a weird language

    when I try to open CR2 files in Camera Raw through Bridge or Photoshop it appears in a foreign language (looks arabic or something). I have checked prefrences in all areas to make sure they are set to english and have also tried to re-install all of

  • What's the dialog box when you launch Aperture for the first time?

    I bought Aperture 3 from the App Store, installed it, and when I launched it something odd happened: I was interacting with another application, and when Aperture started up it out up the main window and a dialog box popped up that asked "Would you l

  • Is there a virus protector for ipad

    EEveryone tells me u do not need a virus protector on iPad?

  • 2 tableView's keepSelectedRow

    Hey Guys I've got a special problem with two tableViews on the same page: If I select a row of the first tableView, the second tableView is getting processed on the screen and the selected row of the first tableView apears marked. Evereything ok by n