Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

Yes, if the AirPort Express is set up to create a wireless network that uses the exact same wireless network name as the other router and the same wireless network password as the other router.

Similar Messages

How do I use an Airport Express as a "range-extender" for Airport Extreme?

I bought an Airport Express with the intent of using it as an "extender" for my Airport Extreme, but I find no paper that describes how this is done. Any suggestions would be appreciated.
Thanks and cheers, Veit

Thanks for the info. Try this to see if it will do the job for you:
_On your AirPort Extreme (AEBS):_
Open AirPort Utility and click Manual Setup
Click the *Wireless tab* below the row of icons
Your *Wireless Mode* should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Note the setting for Wireless Security as you will need this for the next setup on the AirPort Express
Update to save changes
_On the AirPort Express (AX):_
Hold the reset button in on the AX until you see the amber light begin to blink more quickly
Temporarily, move the AX near your computer and connect a short ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup.
Click the *Wireless tab* below the row of icons
*Wireless Mode*….should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…the name of your main AirPort Extreme network should appear as a choice. Click to select it.
Place a check mark next to Allow wireless clients
Wireless Security….exact same setting as your AEBS
Wireless Password…exact same password as your AEBS
Confirm Password
Click the Base Station tab to assign a name and device password for the AX, set time zone, etc.
Click the Music icon to enable AirTunes if you wish
Update to save settings. You can disconnect the ethernet cable and move the Express to the desired location.
For further reference, Apple's instructions for the "extend" setup appear on pages 43-44 in the Apple AirPort Networks Guide.
Please post back on your results.
Message was edited by: Bob Timmons

How do I use the new Airport Express as an extender for a non-Apple router?

We have an "Arris" router in our house and are thinking of buying an Airport Express to extend the internet. How can we use the Airport express as a repeater on a non-Apple router without having to use millions of ethernet cables?

Apple designed their "extend a wireless network" to only work with other Apple routers wirelessly, so it would be extremely unlikely like it would work with an Arris wireless router.
Your best bet is to always use products from the same manufacturer if you need this type of feature on your network to insure compatibility.
If Arris does not offer a product for this purpose, a "universal" extender like the Netgear device linked below might be able to do what you want. It was not "universal" enough to extend an Apple network when I tested a device recently.
Universal WiFi Range Extender (WN3000RP) - Netgear

Use my Airport Express to connect my PC to my non-aiport wireless network??

I have a wireless network at my house. Can I somehow use my airport express to connect a pc that does not have a wireless card to my existing (non-airport) wireless network?

Duplicate
http://discussions.apple.com/thread.jspa?threadID=624119&tstart=0

How do I use my Airport Express 1st generation to extend my wireless network?

Hi all,
I've got an old time capsule (1st gen) and a 1st gen airport express in another room with a USB printer connected.
There's up to 100 meg broadband from a virgin hub, but that is connected by ethernet to my time capsule. I then configured the time capsule to be a WDS base, and the airport express to be a WDS remote.
That all worked OK.
But the internet is incredibly slow in the office (where the Airport Express is). Pages do load eventually, but VERY slowly!
I asked in the apple store if it was necessary to buy new stuff, because the internet is so slow, and the guy said that the system should work if I am using the airport express to extend the network.
I reset everything, and reconfigured as above, and it is still painfully slow.
Any ideas?
I don't mind ditching the time capsule as a base station and just having the AP extending the virgin hub if that'll work - or ditching the AP and using the time capsule to extend the virgin hub....or buying a new airport express and extending the virgin hub...I jsut want fast internet in my office room!
Thanks in advance!

To configure an AirPort Express for iTunes streaming, please check out the following Apple Support article for details.

Can I use an Airport Express Base Station to extend non-Apple router range?

We have a Netgear 802.11n router in our house. I just bought a MacBook Pro and now am accessing out wifi from the other end of the house along with my iPod Touch 4g. Both seem to show at best about half strength signal strength. House is small and nearly all devices on same floor.
Can I use the Apple Airport Express Base Station as a bridge to extend our wifi network giving me stronger signal for my Apple devices or will it only work with Apple routers? Netgear and others like Hawking make wifi range extenders and those are still under consideration.

It would be extremely unlikely that an AirPort Express would "extend" the wireless network produced by the Netgear router using wireless only. Apple's "extend" feature appears to be proprietary among Apple "n" routers. As far as we know, it does not work with any other manufacturer's products for the purpose of wireless only extension.
If you are planning to connect the AirPort Express to the Netgear using an ethernet connection, then it could be configured to extend that way.

Can i use Airport Express as a range extender in conjunction with my standard (non-Apple) hub ?

I have poor Wifi signal upstairs in my house. Can Airport Express to extend that in conjunction with my current Hub (it's a Livebox - i currently live in France) ? Or do i need to run the Airport Express in conjunction with an Apple Hub ?

Bonjour!
You can extend the Livebox, just not wirlessly as Apple's implementation of WDS only works with other Apple devices.
So you can either use an ethernet cable or as I do with my netgear router turn off the Livebox's WiFi (If that's possible) and use Airports to set up a separate wireless infrastructure. Get 2 APs and plug one directly via etherenet into the Livebox then use WDS to extend this to a second AP wirelessly.
Regards,
Shawn

Airport Express won't range extend????

I am staying in Europe for a few weeks with Family and I have 2 of my Expesses and I cannot get them to work as a range extender. I am running Airport Utility 5.5.1 and I have no button to "Allow range extender"? Is this hurting me?
I can get the base working fine but when I add the range extender it uploads to the base and hangs. I have tried for 2 hours now.
Any advice? Thanks Much!
Rich

You'll need to use the WDS type configuration to get the devices to extend the signal.
Depending on your setup, you could configure this as one "main" and two "remotes" or if the situation calls for it, a "main, "relay" and "remote".
Use this link to setup the "main" and "remotes" configuration:
http://discussions.apple.com/thread.jspa?threadID=2355832&tstart=0
If need to setup a "main", "relay" and "remote", then use this link:
http://discussions.apple.com/thread.jspa?threadID=2422028&tstart=0
The WDS setup is tricky for most users, so you'll need to proceed very carefully to avoid errors and frustration.

Can I connect a 5th gen extreme as a bridge/repeater to a non-apple router without an ethernet cable connection? How?

I currently have a motorola surfboard cable modem/router (dual N) that works for all our wireless devices (PCs and MACBOOK) except that our ipad 2 which drops video streaming in the livingroom (works great in the office and bedroom). I'm hoping to purchase a new 5th gen airport extreme and set it up in the living room for the ipad 2 as a repeater/bridge (I think that is the same function) but don't want to have a ethernet cable connecting the motorola to the airport extreme. Is it possible? How? Since the ipad 2 works in other rooms, I don't think it is the ipad 2.

Sorry, but Apple products would not be compatible with your Motorola modem/router using wireless only.
If you need to do this using wireless only, you might want to check with your Internet service provider to see if they have a Motorola product that would be compatible for the purpose that you need.
If you are able to permanently connect the AirPort Extreme to the Motorola modem/router using a wired Ethernet connection, the AirPort Extreme could be configured to provide more wireless coverage that way.

Can I use 2 airport express base stations to extend my G and N networks?

I currently have my Time Capsule broadcasting an N only signal at 5ghz and use the router that came from the cable company to broadcast a G signal. Can I buy 2 expresses to repeat both networks?

Here's what I see when I try this. Your results may vary.
Depending on your connection quality, distance from the TC, etc., the speed will drop by approximately 40-50% if you change to the 2.4GHz compatible settings that you mention. In other words, if you were getting a Transfer Rate of 250-270 on 5GHz, the Transfer Rate will likely drop to 110-130.
This is assuming that there are only "n" devices active on the network. If you have a "g", or "b" device active on the network, the overall network speed will drop to "g" or "b" levels depending on the device that is active. If you have a "b" device active, the Transmit Rate will likely drop to the 25-30 range.
You can check the Transmit Rate on your Mac by holding down the "option" key while you click on the fan shaped Airport icon at the top of the screen.

Can I use Airport Express as a Wifi Extender?

Forgive my ignorance, but I just swithed to all Apple products a few months ago and I have a question about the airport express.
We currently have one airport extreme base station set up in our house. The only problem is that the g signal for my iPhone won't reach quite far enough to get to the third floor (its a very long and tall home).
I was wondering if you can use the Airport express as a wifi extender with no cords plugged into it, similar to the linksys extenders you can buy that extend the signal range.

LukeW, welcome to the discussions!
Yes, an AirPort Express could be used with your Extreme to "extend" the wireless network created by the Extreme. I assume here that you have an "n" capable Extreme.
If you have an older 'g" Extreme, the Express could be used to "participate in a WDS" (wireless distribution system), which is a similar setup.
It will probably take some experimenting to find the best position for the Express (you want it to receive as strong a signal as possible and "extend", so a good starting point would be to place the Express at a point that was roughly half way between the Extreme and the area that needs more wireless signal.

Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

Hi
Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
Thanks in advance

The first generation Time Capsule was not a simultaneous dual band device.
If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

Can you use the Airport Express A1264 as an AP and a DHCP server at the same time?

Can you use the Airport Express A1264 as an Access Point and a DHCP server at the same time?
I would like to use it as a DHCP server and AP at the same time in my LAN (no internet, just local machines through a few switches). I was lead to belive this could be the case from a few networking friends that haven't been friendly enough to help me out setting it up.

I need it to act as a dLink/Cisco/Linksys/etc basic wifi router, in the fact that you can access it via wifi, and it will spit out DHCP addresses (192.168.1.xxx) to everything wired downstream of it.
I want to simultaniously provide a Wifi connection and a LAN connection at the same time
Thanks,
BRad

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

Can I use an airport express as a range extender to a NON apple router using an internet cable (so not wireless)

Similar Messages

Maybe you are looking for