Can I use an Airport Express Base Station to extend non-Apple router range?

We have a Netgear 802.11n router in our house. I just bought a MacBook Pro and now am accessing out wifi from the other end of the house along with my iPod Touch 4g. Both seem to show at best about half strength signal strength. House is small and nearly all devices on same floor.
Can I use the Apple Airport Express Base Station as a bridge to extend our wifi network giving me stronger signal for my Apple devices or will it only work with Apple routers? Netgear and others like Hawking make wifi range extenders and those are still under consideration.

It would be extremely unlikely that an AirPort Express would "extend" the wireless network produced by the Netgear router using wireless only. Apple's "extend" feature appears to be proprietary among Apple "n" routers. As far as we know, it does not work with any other manufacturer's products for the purpose of wireless only extension.
If you are planning to connect the AirPort Express to the Netgear using an ethernet connection, then it could be configured to extend that way.

Similar Messages

  • Can I use 2 airport express base stations to extend my G and N  networks?

    I currently have my Time Capsule broadcasting an N only signal at 5ghz and use the router that came from the cable company to broadcast a G signal. Can I buy 2 expresses to repeat both networks?

    Here's what I see when I try this. Your results may vary.
    Depending on your connection quality, distance from the TC, etc., the speed will drop by approximately 40-50% if you change to the 2.4GHz compatible settings that you mention. In other words, if you were getting a Transfer Rate of 250-270 on 5GHz, the Transfer Rate will likely drop to 110-130.
    This is assuming that there are only "n" devices active on the network. If you have a "g", or "b" device active on the network, the overall network speed will drop to "g" or "b" levels depending on the device that is active. If you have a "b" device active, the Transmit Rate will likely drop to the 25-30 range.
    You can check the Transmit Rate on your Mac by holding down the "option" key while you click on the fan shaped Airport icon at the top of the screen.

  • Can I use the AirPort Express Base Station as a wifi 'reciever'?

    I have a AirPort Extreme base station connect to the internet in my living room. But my bedroom is a little far from the living room so that I cannot revieve a good wifi. I want buy a AirPort Express Base Station to put in my bedroom connecting my PC. Will this way work to make my PC's internet faster??

    Hello:
    You can extend a wi-fi network like this:
    http://support.apple.com/kb/HT4259
    That will not increase speed, but it will improve reception.
    Barry

  • Can I use my Airport Express Base Station to charge my mini?

    I don't use the Airport thing anymore and it has a USB and wall plug. Will it work?

    Yeah, I have just tried to plug my Nano with it, the Nano get charged and "do not disconnect" flashing

  • Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

    Hi
    Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
    Thanks in advance

    The first generation Time Capsule was not a simultaneous dual band device.
    If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
    In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

  • Using a Airport Express Base Station for wireless printing.

    Using a Airport Express Base Station for wireless printing. Got a new DSL router yesterday. Our old one we did not have password protected. The new one is. I can't figure out how to get the base station to connect with the new router.

    thanks for the reply,   I couldn't connect with the base station.  The solution (thank you apple genius bar) was to do a soft rest of the unit which allowed and ethernet connectiont to be established.  Took the genius bar gy about ten min (and 2 attempts) to get the base station reconfigured.  Got home and it worked like a charm.  Would have never known what he knew.  Thank you genius bar.  Thank you for taking time to respond.

  • Can I use two airport extreme base station on the same network

    Can I use two airport extreme base station on the same network

    Here is my network setup:
    D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
    attached via ethernet to
    5th generation AirPort Extreme Base Station - Main (Bought last week)
    attached via ethernet to
    4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
    The main AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
    TCP/IP Tab -> Configure IPv4: Using DHCP
    DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
    NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
    The remote AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
    TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1  (Everything else under this tab is blank)
    Hope this helps with info needed.

  • Using an Airport express base station as a bridge

    Hello,
    Sorry if the question has already been asked, but I'm getting nuts...
    I have today a XP PC connected to the internet over WiFi (modem + router).
    The problem is that router & PC are far one from the other in my house, and I bought this AirPort Express to extend the range of the existing network.
    Could someone explain to me how to access to the configuration menu of the Airport to "tell him" that I want to use it as a bridge ?
    I think I've done what's requested, but cannot access to any menu (although my PC is connected to the airport WLAN network).
    Thanks in advance

    I bought this AirPort Express to extend the range of the existing network.
    Could someone explain to me how to access to the configuration menu of the Airport to "tell him" that I want to use it as a bridge ?
    Unless your current router is an AirPort, you will find few non-AirPort routers that will work in a Wireless Distribution System (WDS). If your primary base station is an AirPort (Extreme or Express), let me know, and I will provide WDS setup instructions.
    You would access the AirPort Express Base Station (AX) setup using either the AirPort Setup Assistant or the AirPort Admin Utility. Both of these come, either on the CD supplied with the AX, or can be downloaded directly from Apple. There is also a Windows version of the AirPort software at the Apple site. (ref: http://www.apple.com/support/downloads/airport42forwindows.html)

  • Can I use the Airport Extreme Base Station with my already existing D-Link router to increase signal strength?

    I already own a wireless router that I would like to keep. Could I use this Airport Extreme Base Station to improve that signal strangth to my room from the living room or to the basement? Would I have to hard-wire both the Base Station and my existing router? You probably have read this question more than once, and I have read some questions of this product too, but for some reason these Apple products I have some trouble with.

    Could I use this Airport Extreme Base Station to improve that signal strangth to my room from the living room or to the basement?
    Yes
    Would I have to hard-wire both the Base Station and my existing router?
    Yes

  • Can I use an Airport Extreme Base Station from the USA in Europe ?

    A friend of mine gave me an Airport Extreme Base Station from the USA to Germany. When I hook it up to my PB by ethernet cable the Computer can't find the Base Station at all. If I use my Sonnett Aria Extreme PCI card it finds the station but in the pop-up menu asking in which country I want to use the airport station it only offers North and South American countries. How do I go from here and why is my PB not finding the station when I'm using cables ? Has it something to do with different models for different countries ? Any idea ? Thanx

    Here you go ...
    Changing the Radio Channel on the AEBSn
    Either connect to the AEBSn's wireless network, or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Setup, check these settings:
    AirPort - Wireless
    o Channel: <Use Automatic or select a preferred channel>

  • Can I Use Airport Express for Airplay and a non-apple router with streaming capabilities on the same network?

    I want to do the following things but can't find one device that fits all purpose.
    Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
    Greedy? Yes I know but why can't we have it all I ask.
    Airport Express severs Wifi Router + Airplay purpose
    Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
    So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
    Is it possible?
    Thanks in advance.

    I want to do the following things but can't find one device that fits all purpose.
    Wi-Fi router that has USB port to share external hard disk wirelessly to all devices (Mac, Samsung Smart TV, PC, Ipad, Iphone) along with inbuilt torrent download capability that also has a 3.5mm jack to do airplay.
    Greedy? Yes I know but why can't we have it all I ask.
    Airport Express severs Wifi Router + Airplay purpose
    Then there are other non-apple routers in market that satisfy my need to attach external hard disk and stream to the devices mentioned (Note: Timecapsule will not stream to my Smart TV)
    So I am thinking why not connect both Airport Express and a second non-apple router and get best of both worlds.
    Is it possible?
    Thanks in advance.

  • Using Airport Express for iTunes on a non-Apple router

    In the past, we used a Microsoft wireless router, and all of the Airport Express stations worked great (we have 3). You can start up iTunes, and iTunes showed all three Airport stations in the popup at the bottom, allowing us to pipe our iTunes music to anywhere in the house.
    The Microsoft router starting going bad (2 years old), and so we replaced it with a Linksys wireless router (the one that also supports a USB printer). The Linksys is working fine for printing on that USB printer from any computer in our LAN, and it provides all the LAN computers with internet connectivity; however, the Airport Express stations are flakey at best.
    At first they didn't even work (aka, didn't show up in iTunes anymore). I ran Airport Admin and connected each one of them to the iMac directly to configure them. After configuring each one, they did start to show up in iTunes. I restored them to their original locations through out the house using wireless connectivity, and they did show up in iTunes and allowed music to play through. Unfortunately, after a day or two, they dropped off, and they never came back. We never had these kinds of headaches with the Microsoft router, so I'm wondering if there is some incompatibility with the Linksys and Airport Express, or if there is some configuration parameter on the Linksys that I need to tweek. Anyone have any ideas?

    I have a similar issue with my Airport Express connected to a Linksys wired router (BEFSR41, the common Linksys 4-port router). My iMac is connected (wired) to one of the ports on the Linksys and the AP Express is connected to one of the other ports. Airport Admin on the iMac can't see it unless I manaully connect to it by specifying the IP address (having fixed its IP from my PowerBook via wireless) and (of course) iTunes on the iMac can't see it either.
    I had an older generation BEFSR41 and this setup worked great, but they must have changed something. I can't seem to figure out how to disable whatever port-to-port (network jack to network jack on the router that is) that they have added the "blocks" Airport Admin utility from seeing it.
    Airport Express   Mac OS X (10.4.8)   Aiport Express connected to a Linksys BEFSR41 wired router.

  • How can I use an AirPort Extreme to expand a normal Wi-Fi router range?

    I used to use my AirPort Extreme as my router, connecting it to an old modem I had. Recently, I had some problems with that modem and had it changed. Now, the new one is also a router, so I decided to use it instead of the AirPort Extreme. However, I don't want to let such an expensive router not doing anything, so I decided I would use it to expand the range of my new router/modem. Is it possible to expand the range of a non-Airport Extreme/Express router, like mine? I tried configuring it to "Expand a network", and it was even in "Bridge Mode", but even with those configurations, it's yellow light kept blinking and AirPort Utility said that it the AirPort Extreme wasn't being able expand the network, and told me to check if the normal router was on and if AirPort Extreme was within its range, and the answer is an obvious yes for both (I can assure you it's within range). Am I doing something wrong, or is it simply not possible?

    Is it possible to expand the range of a non-Airport Extreme/Express router, like mine?
    Yes, if you connect the AirPort Extreme to one of the LAN <-> ports on the modem/router using a wired Ethernet connection.
    Extremely unlikely if you are asking about having the AirPort Extreme connect wirelessly to the modem/router and extend or repeat the signal in that manner.
    The reason for this is that Apple designs their routers to only the extend the signal from another Apple router wirelessly.

  • AirPort Express Base Station - Use with HP Laser Jet & Time Warner

    Have this brand new AirPort Express Base Station that I want to install in place of the Linksys router that is connected to the Time Warner cable base station delivering internet connection so I can connect HP Laser Jet 6/6mp printer via USB on the AirPort Express. Any recommendations or suggestions ?

    Thanks
    The question is this
    If I use the Airport Express Base Station as wireless router for internet service coming in from Time Warner AND plug the HP LaserJet printer USB plug into the AirportExpressBaseStation will I be able to overcome the communication problem I am having when I plug in the HPLP's USB plug directly into the MacBookPro and cannot get use of the printer due to language ( Apple Talk vs Post Script ) problems ? Probably not make any difference since the USB female on the AEBS is just a conductor !
    While I have you ! How do Mac people delete backwards like PC people do when they press the delete key and letters delete from left to right ?

  • Can't read airport express base station configuration wirelessly

    The setup:
    2TB time capsule that takes the ethernet feed from the cable modem for internet access.
    Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
    The problem:
    I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
    I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
    Any thoughts?

    When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
    You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
    If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
    Modem/Router Power Recycling - Quick
    - Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
    - Power-on the BT Voyager modem; Wait at least 5 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    - Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the BT Voyager modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)

Maybe you are looking for

  • Dynamic Tables and Data Service

    hi :) i have a dynamic table (with add/delete row) buttons, one of the fields in each row, needs to populate the rest of the fields with first/last/address information. i understand how the data service works for a single fields, is there a way to do

  • About smart playlists

    i created a new smart playlist and selected live updating. but i wonder if there's a way to make the smart playlist add songs ALREADY in my itunes library that match the conditions? or do i have to delete and re-add the songs all over again? thanks

  • Track Select Forward Tool / Track Select Backward Tool

    I'm an regular Premiere Pro user doing more work in Audition these days.  One tool I can't find in Audition that I really miss from Premiere Pro is the Track Select Forward Tool / Track Select Backward Tool.  Is there something like this in Audtion? 

  • Can I make Siri understand me more clearly?

    Often when I ask Siri questions she doesn't understand what I'm saying, as in like she thinks I said something else. Is there anyway to make her understand or hear me more clearly? I talk loud enough and don't slur my words so I don't understand what

  • Performance vs. Pathscale EKO on AMD64

    Does anyone know how the Studio11 alpha compilers compare in performance to the Pathscale EKO on AMD64 platforms?