Can i use an airport extreme card in a powerbook 400MHz ?

i have an older powerbook 400MHz which is second hand and i have no manual for it. does anyone know if i can install an airport extreme card?
powerbook G4   Mac OS X (10.3.9)  

wcslingsby, Welcome to the discussion area!
No you can not use an AirPort Extreme card with your PowerBook.
Your PowerBook G4 400 MHz requires the original AirPort card.

Similar Messages

  • IMac G4-can i use a Airport Extreme card to connect??

    I'm a bit confused..which macs let you use an airport extreme card, which are for the normal airport cards, and which require 'something else'??!
    I have a iMac G4, not sure exactly which OS (I know it's OS x but not what the numbers are). It's around 4 years old but I've been told I may need to get something else as well as the airport cards? It's passed on info so sorry I can't be more accurate!
    It's to connect to a MIMO belkin router, apparently that's fine if i get the right thing
    any help would be greatly appreciated!
    thanks
    imac G4   Mac OS X (10.3.2)  

    Duane--please forgive me if I am not doing this right, but I am new to the discussion area and haven't figured out how to post a new question for everyone to ask. I have a 17inch flat panel iMac, 800mhz processor speed and am looking to purchase an airport card from e-Bay. I see various people selling and I know I need the original airport card. But my question is: are there more than one models of the original airport card? For instance, one seller is listing an original airport card model # M7600LL/A at a certain price, and it lists my computer as being one of the computers that this card will work with. Another seller has an original airport card model # M7600LL/E for a much lower price. But the description is rather bare of information. Is this the same card just at a different price? Or are there different models of the original airport card? Thanks in advance!
    17 inch Flat panel iMac, 800mhz   Mac OS X (10.3.9)  

  • Where can i buy an airport extreme card for my powerbook

    Where can I buy an airPort extreme caed for my powerbook? are they even available, if not how can I go wireless ?

    eBay is a good source, though as ever, buy wisely and make sure you get the right card for your specific model.
    Alternatively there are wireless cards available that go in the card slot. Again eBay is full of them but be sure they're OSX compatible -  its a good idea to put this phrase in your search terms.
    I can vouch that this one works as I'm using it now:
    http://cgi.ebay.co.uk/SAGEM-PCMCIA-AIRPORT-54MBPS-WIRELESS-WIFI-CARD-MAC-OS-X-/4 00124141388?pt=UK_Computing_Apple_Mac_Accessories&hash=item5d2941df4c#ht_3229wt_ 886
    It just plugged straight in and was recognised as an Airport Card. This is from the UK site but I'm sure you can find the same thing wherever you live, or at that price just have it shipped.

  • Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router.  can I use my Airport Extreme as wireless router?

    We currently have the following wireless home-network configuration, powered by Verizon DSL. 
    2 macbook pro’s
    1 emachine
    HP PhotoSmart 6122 all-in-one printer
    Apple TV
    Apple Airport Extreme Base Port A 1408
    Westell 7500 router
    Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port.  The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
    We now want to change from DSL to cable, thus ditching Verizon.  Our new cable provider supplies the cable box, but no router for wireless networking. 
    Here are my questions.
    Can I use the Airport Extreme (AE) as a wireless router? 
    If so, how should I hook it up?  Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
    If not, how should I be using the AE to some advantage?  What can I get out of the investment?
    Thank you very much for your help!  Beatriz

    What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
    Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • Can i use my airport extreme as a modem with comcast

    can i use my airport extreme as a modem with comcast cable

    No, since there is no modem on board an AirPort Extreme, so you will need to use an outboard modem if you want the AirPort Extreme to have Internet access.

  • Can I use my Airport Extreme as a wireless bridge?

    Can I use my Airport Extreme as a wireless bridge?

    When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
    If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
    In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
    But, the AirPort Extreme cannot do this with a product from another manufacturer.
    So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

  • Can I use two airport extreme base station on the same network

    Can I use two airport extreme base station on the same network

    Here is my network setup:
    D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
    attached via ethernet to
    5th generation AirPort Extreme Base Station - Main (Bought last week)
    attached via ethernet to
    4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
    The main AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
    TCP/IP Tab -> Configure IPv4: Using DHCP
    DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
    NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
    The remote AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
    TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1  (Everything else under this tab is blank)
    Hope this helps with info needed.

  • Can I use the airport extreme with my Mac OS X?

    Can I use the Airport Extreme with a Mac OS X  10.5?

    Yes. In addition to administer the latest version of the AirPorts, you would need AirPort Utility 5.5.3, which requires OS X 10.5.7 or later.

  • My eMac can't find installed airport Extreme card

    Hello everyone,
    Having bought a netgear wireless modem for a wi-fi connection, I was told to install an airport extreme card on my eMac, which I did - several times. But the eMac says he can't find when I look for it, either in the internet setup or in the general information about the hard and software. I also installed the accompanying software. Why can this be ? Thanks for your advice!
    eMac   Mac OS X (10.4.7)  

    It's an eMac (USB 2.0) model. I'm not certain I should try to push the card in more ? Are those cards defective frequently ?
    Which eMac do you have? You can use KB 86325, eMac: How to locate the serial number
    and identify your model to determine which model
    you have.
    If your eMac is the "eMac (ATI Graphics)", "eMac (USB
    2.0)", or "eMac (2005)" the AirPort Extreme card is the correct
    wireless card.
    If your eMac is the "eMac", it requires the original
    AirPort card and is not compatible with
    the AirPort Extreme card.
    Assuming that your eMac is compatible with the AirPort Extreme card, one or more of
    the following must be true if the eMac is not
    detecting the card.
    The card is not installed
    correctly.
    The card is defective.
    The
    eMac's motherboard is defective.
    eMac   Mac OS X (10.4.7)   1.25 GHz / 768 Mo DDR SDRAM

  • Wire bracket in iBookG4 - can't clip in airport extreme card

    The airport extreme card is installed and works but I can't put back the keyboard because i can't get the clip to sit back in the slots. Others too have tried. Any ideas please or should I just use pliers? Thanks.

    The airport extreme card is installed and works but I
    can't put back the keyboard because i can't get the
    clip to sit back in the slots.
    Check that you inserted your AirPort Extreme card
    "completely".
    Check that the antenna cable isn't under the bracket.
    dan    

  • How can I use an AirPort Extreme to expand a normal Wi-Fi router range?

    I used to use my AirPort Extreme as my router, connecting it to an old modem I had. Recently, I had some problems with that modem and had it changed. Now, the new one is also a router, so I decided to use it instead of the AirPort Extreme. However, I don't want to let such an expensive router not doing anything, so I decided I would use it to expand the range of my new router/modem. Is it possible to expand the range of a non-Airport Extreme/Express router, like mine? I tried configuring it to "Expand a network", and it was even in "Bridge Mode", but even with those configurations, it's yellow light kept blinking and AirPort Utility said that it the AirPort Extreme wasn't being able expand the network, and told me to check if the normal router was on and if AirPort Extreme was within its range, and the answer is an obvious yes for both (I can assure you it's within range). Am I doing something wrong, or is it simply not possible?

    Is it possible to expand the range of a non-Airport Extreme/Express router, like mine?
    Yes, if you connect the AirPort Extreme to one of the LAN <-> ports on the modem/router using a wired Ethernet connection.
    Extremely unlikely if you are asking about having the AirPort Extreme connect wirelessly to the modem/router and extend or repeat the signal in that manner.
    The reason for this is that Apple designs their routers to only the extend the signal from another Apple router wirelessly.

  • I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

    I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

    I know that it will increase my wireless coverage in my house but will it increase the speeds?
    Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
    If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
    If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

  • Where can I buy an airport extreme card for my g5 in canada?/

    I just got a power mac g5 i have the antenna but no "airport extreme card" where can i get one ? are they hard to install?

    Try here:
    http://www.ehmac.ca/classifieds/
    Or, there is always eBay Canada, which has numerous offerings for the Airport Extreme card:
    eBay Search
    Hong Kong seems to have some of the best buys, with shipping for as little as $2.
    US sellers abound, with numerous European sellers as well.
    There's a Canadian seller who thinks that his cards are worth more than when new.......

Maybe you are looking for

  • Idocs - Inbound function module

    Hi All, I'm facing a prolem while testing the inbound function module thru transaction WE19. The steps i'm following. 1) i'll give the message type & will proceed further 2) when i select the idoc & click on the push button "inbound function module "

  • Making existing frequency become zero frequency

    Hye. Help me, I got a probem on making the existing frequency from read from measurement data become zero. Is that possible? Because the data should have 0Hz of its frequency. For now it have around 0.05Hz, so i want it to become 0. I has attach my s

  • Error In MSS Employee Information _general Information Page

    Dear All, I am facing an Issue in MSS . When I click on My Team Information > Employee Infomation>General Information Page--> The Standard Employee Search Application is not displaying the List of (Direct Reports) employees. The same Application work

  • HT1414 What do I do if my music isn't showing?

    When I go into my liberary of music on my iPod all of the music appears grey and won't let me play it!

  • Can't see my items on formulas

    Hi everyone I am a newbie about OPM. I want to create a formula about my item. I use "OPM All" responsibility for creating items (Demo instance). I use this path for creating items. "OPM All" responsibility Inventory > Items > Master Items and I assi