Can I use an Airport extreme to extend my ATT wireless network?

Hi
I get my internet through an ATT DSL wireless router positioned up in my attic. I have a studio in my basement with 2 computers, a plotter, a laser printer and a fax/scanner/photo printer. I've run an ethernet cable down from the attic in to a central location in my basement. I've run ethernet cable from the three printers to that same location. I want to set up an unused Airport extreme base station in my studio to connect the plotter and two printers to my wireless network. One snag is that one of my computers has a bad airport card slot and needs to be connected to the network with an ethernet cable.
Can you help me solve this?

OK,
Got er done this weekend and I have extended the network to my studio. One problem though, My main computer keeps dropping off the wireless network. It connects for a second and then gone. I have solved this for the moment by disconnecting my scanner from the AEBS and connecting my main computer to the AEBS. I still have not connected my laser printer to the network, but will use its USB connection to connect it to the AEBS. I just need to go buy a longer cord.
Things work for now and I can work on some jobs this week. I plan to search the boards to solve the dropping off problem soon.
Thanks again for all of your help.

Similar Messages

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • Can I use two airport extreme base station on the same network

    Can I use two airport extreme base station on the same network

    Here is my network setup:
    D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
    attached via ethernet to
    5th generation AirPort Extreme Base Station - Main (Bought last week)
    attached via ethernet to
    4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
    The main AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
    TCP/IP Tab -> Configure IPv4: Using DHCP
    DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
    NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
    The remote AEBS is set to:
    AirPort Section:
    Base Station Tab -> Allow setup over WAN is CHECKED
    Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
    Internet Section:
    Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
    TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1  (Everything else under this tab is blank)
    Hope this helps with info needed.

  • Can I use an Airport Extreme as a modem and wireless router?

    I realize this shows my ignorance, but I am wondering if I need to lease my isp's (Comcast) modem or if I can use and Airport Extreme instead.  Thanks for your help.

    AirPort Extreme is a router only.....no modem on board.....so you will need a modem to work with the AirPort Extreme if you want to be able to access the Internet.

  • Can I use the Airport Express to create a secure wireless network in a wireless-only hotel?

    Can I use the Airport Express to log onto an unsecured hotel wireless network, without an ethernet cable, to create a secure wireless network for my MacbookAir, IPad, IPhone, etc.? If so, how is that done?

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • How can I use an airport extreme to extend my wireless network?

    I have a Verizon FIOs router with both wireless and ethernet capability. I also have an airport extreme base station, which is currently connected to the Verizon router by Ethernet and provides wireless to a MacBook in a distant room upstairs. Practically, I have two wireless network now. I have two G4 Sawtooth, which do not have wireless PCI card and require ethernet connection for internet. One of them is in the upstairs study room and connected to the Verizon wireless router by Ethernet. The other is in an downstairs room has not wireless connection.
    Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network? If so, how do I set up the airport station downstairst? If not, I know that I have get a PCI wifi for the Sawtooth downstairs.
    Your advice is greatly appreciated.
    Robert

    Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
    Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
    What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

  • What is the difference between airport extreme and airport express, can i use an airport extreme to extend internet and also the airport express ?

    CAN YOU TELL ME THE REAL USE ?

    Oh wow, now I wished I would have researched this more, We currently have the airport extreme and wanted a backup drive and was referred to get the time capsule. So i guess i need to choose which one to use.

  • Using apples airport express to extend a linksys wireless network

    HI there,
    Is it possible to configure the apple airport express to extend a linksys wrt120N wireless network? if so how? 

    So the concern that you expressed regarding to that if the apple airport express is N technology kind of extender then it may extend a linksys wrt120N wireless network... But before configuring the apple airport express try upgrading the firmware of the Router and then reset the router.....
    After resetting the router power cycle the whole network and configure the Router again as per  ISP ( Internet Service Provider ) setup...

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • Can I use an airport express to extend a Cisco E4200 802.11n or 802.11g wireless network?

    Can I use an Airport Express to extend a Cisco E4200 802.11n or 802.11g wireless network?  I'd like to improve access in a dead spot with an airport express. I know I can connect this wayt for airplay, but how about extending the signal?
    Thx! ACB

    Apple's "extend a wireless network" function appears to be a proprietary feature that works only with other Apple AirPort routers. As far as we know, this feature is not compatible with devices from other manufacturers.
    It would be extremely unlikely that the Express could do what you want, but some things are never known until  you try.

  • Can I use my Airport Extreme as a wireless bridge?

    Can I use my Airport Extreme as a wireless bridge?

    When you say "wireless bridge", I assume that you want the AirPort Extreme to receive a wireless signal and provide an Ethernet output, correct?
    If you have another Apple router providing your "main" wireless network, the AirPort Extreme could possibly be configured to "Extend a wireless network".
    In that setting, the Extreme provides more wireless coverage and Ethernet ports are enabled, so you could connect an Ethernet device that way.
    But, the AirPort Extreme cannot do this with a product from another manufacturer.
    So, in order to answer your question specifically, can you provide the make and model number of your "main" router?

  • When using an airport extreme to extend a wireless modern, will the lan ports work?

    When using an airport extreme to extend a wireless modern, will the lAN ports work?

    The AirPort Extreme can extend the wireless signal from another Apple wireless router. When it does, the Ethernet ports on the extending AirPort router are enabled.
    Apple's "extend" feature appears to be a proprietary Apple function, so it would be extremely unlikely that an AirPort Extreme...or any other Apple router....could extend a 3rd party router product wirelessly....if that is really what you are asking here.

  • Silly question, maybe. I want to change from Verizon DSL to cable, but cable company doesn't supply router.  can I use my Airport Extreme as wireless router?

    We currently have the following wireless home-network configuration, powered by Verizon DSL. 
    2 macbook pro’s
    1 emachine
    HP PhotoSmart 6122 all-in-one printer
    Apple TV
    Apple Airport Extreme Base Port A 1408
    Westell 7500 router
    Thinking I’d get wider wireless coverage throughout my 2 bedroom home, I purchased the Airport Extreme. It is connected to the router via its sole usb port.  The result was only a tiny increase in speed, and no increase in coverage, so I don’t know why I have it.
    We now want to change from DSL to cable, thus ditching Verizon.  Our new cable provider supplies the cable box, but no router for wireless networking. 
    Here are my questions.
    Can I use the Airport Extreme (AE) as a wireless router? 
    If so, how should I hook it up?  Should the usb cable go from the AE to the cable box, and all the other devices connect wirelessly?
    If not, how should I be using the AE to some advantage?  What can I get out of the investment?
    Thank you very much for your help!  Beatriz

    What I wrote has nothing to do with what the cable company charges for their installation. And, usually they will help with the router setup even if you supply your own router. I don't know what they will charge for the modem.
    Note that you need to get just a modem. You don't want a modem/router combination. That will make using an AEBS effectively nearly impossible. You will need to ask specifically for just a standalone modem, and that you will supply your own router.

  • Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

    I am a big fan of both the Airport Extreme and Airport Express.  In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters.  We have a good quality wired Cat5e ethernet network extended between the buildings and offices now.  Is this possible and does it seem like a good practical solution?  I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas. 

    Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
    Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

  • Can i use an airport extreme card in a powerbook 400MHz ?

    i have an older powerbook 400MHz which is second hand and i have no manual for it. does anyone know if i can install an airport extreme card?
    powerbook G4   Mac OS X (10.3.9)  

    wcslingsby, Welcome to the discussion area!
    No you can not use an AirPort Extreme card with your PowerBook.
    Your PowerBook G4 400 MHz requires the original AirPort card.

Maybe you are looking for

  • Year End Openning Balance

    Hi experts, I have a small doubt regarding OB Year 010407 to 310308 I have entered trialbalance as openning balance of 310308 with date 310308 when i run the trial balance report for year 010408 to 310309 OB column is empty. i also selected the optio

  • HT201210 if the error message states that my iphone is corrupted, how do i correct this?

    When I sync my iphone to itunes i got a message saying that it is corrupted, how do I correct this?

  • How to find called T-code/Program of another T-code/Program

    Hi Experts,     Transaction 1 calls Transaction 2. I need to know, which transaction called transaction 2, being in transaction 2. How? i.e., Can I find the program which called the current program which is running??  Is there any function module to

  • Serialization and compression

    i have 3 big HashMap in a class. i want to serialize/deserialize this class using Externization and compression. if any one have good example to share.

  • Is PGM supported by WindowsXP?

    Hi, In MCDN Library WinSock2 Document: IPPROTO_RM Socket Options, it states that Windows XP: Reliable Multicast Programming (PGM) is not supported. But it also stated that use WSAENumProtocols to find installed Protocols. I wrote a few lines of code,