Can I use an in focus lp70 with the iPad

I am trying to connect an in focus lp70+ projector to an iPad with the apple via adapter but get no picture. Do I need special software or a tv adapter?  Any help is greatly appreciated.

If you have an iPad 1, are you using an app that supports video out? Only a few apps do; check with the developer of the app you want to project for information.
Regards.

Similar Messages

  • Can I use an external hard drive with my ipad 2

    can I use an external hard drive with my ipad 2

    There are WiFi enabled portable hard drives available that can stream media, such as music or video, to your iPad, but no external hard drive in the sense of how you would use one with a computer.

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

    http://www.fileinfo.com/extension/acc

  • Can i use my old IPOD dock with the new G5 IPOD?

    Can i use my old IPOD dock with the new G5 IPOD?

    That's really good to know. I thought because it was a different thickness you wouldn't be able to, and the dock adaptor that comes with the new iPods doesn't fit into the old Photo dock.
    Do you know if you can use the charger that came with the old Photo iPods? You can plug straight into the power socket, but the cable that goes into the charger from the iPod is the firewire cable, so I was thinking maybe it wouldn't work, and I don't want to try it in case I short out my iPod or something!

  • Can i use my iphone 5 charger for the ipad air

    Can I use my iphone 5 charger for the ipad air?

    It's really not recommended. The iPhone's 5w charger does not output enough current to properly charge the battery. It -may- charge but if it did, it would charge the iPad very slowly.
    This would be like trying to fill a bucket of water (iPad) with a squirt gun (5w charger)
    Also under iOS 7, the charging requirements are much stricter than iOS 6. You'll likey get an error message if you try.

  • Will you be able to use Siri on iOS 6 with the iPad 2?

    Will you be able to use Siri on iOS 6 with the iPad 2?

    http://www.apple.com/ios/ios6/siri/
    *Siri will be available only on iPhone 4S and iPad (3rd generation) and requires Internet access. Siri may not be available in all languages or all areas, and features may vary by area. Cellular data charges may apply.
    Major League Baseball trademarks and copyrights are used with the permission of MLB Advanced Media, L.P. All rights reserved.
    Now you know what we do.

  • I am considering purchase of the new iPad and already own iphone 3GS, can I use my phone to tether to the iPad and use the phones 3G connection? This will allow me to buy the cheaper version of the iPad without 3G.

    I am considering purchase of the new iPad and already own iPhone 3GS, can I use my phone to tether to the iPad and use the phones 3G connection?
    This will allow me to buy the cheaper version of the iPad without 3G.

    You can tethe, but depending on carrier you may need to pay for that option... I've decided to have my phone on one provider and my ipad on another so i always have connectivity... More expensive in the long run, but I need to make sure I am always "on" for work
    YMMV

  • How can i use Mail on 2 macs with the same mail address?

    Hi,
    I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
    Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
    What is to be done to separate the two systems (i. e. make them independent of each other)?
    Hans

    It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
    The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

  • Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

    can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

  • Can i use my new I pad with the Canon MX870 printer?

    Can I use a I PAD 2 with me Canon MX870 Printer?

    The Canon MX870 is not on Apple's AirPrint list of supported printers:
    AirPrint basics
    So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

  • I can't get my Mac Pro pair with the ipad

    I can't get my Mac pro pair with the iPad

    For what purpose? It isn't possible to transfer files by way of Bluetooth from the iPad to Mc.
    Stedman

  • How can I use a shared library made with the application builder?

    Hi,
    I am using LabVIEW 7.1 running on Slackware 10.1 (kernel 2.4.29) and I am trying to call a graph display from a C program that I use for debugging VME access from a VMIVME controler. So using the application builder I built the VI as a shared library (graph.vi -> graph.so) containing a function called "graph". In my main program the call to the dlopen fails with the error: "graph.so: undefined symbol: UninitLVClient". When I examin graph.so with nm I see that UninitLVClient and other LabVIEW functions are indeed undefined and using ldd shows that graph.so has dependencies only on libc.so.* and *linux*.so.* but not on LabVIEW related stuff. Those functions are defined in the liblv.so that's in the cintools directory but I have no idea if the user is supposed to use that.
    So I think I am missing an important concept here. Can somebody help or direct me to some documentation (I found lots of information about how to link external code to LabVIEW but nothing about how to link LabVIEW code to an external program)?

    Thanks Watermann,
    your message has been very useful so now I am linking to the proper library but I still have problems when trying to load dynamically the shared library produced with LabVIEW. It is strange that I could successfully load the lvrt library at loading time but it does not work when I am loading the library at execution time.
    I made a small LabVIEW program that prints a hello window and I am calling it from a C program. In the first program main.c I am linking to the lvrt library at loading time and it works but in the second one I am linking dynamically at execution time and it does not work. For my work I need to be able to load code done in LabVIEW at execution time. Any help is appreciated!
    Program main.c:
    // small program to call a LabVIEW shared library
    #include
    #include
    #include "hello.h" // got this from the LabVIEW builder, i.e. when I made the hello.so
    int main(void)
    printf("Hello from C!\nLets call LabVIEW now\n");
    hello();
    printf("Bye ... \n");
    return 0;
    The command to compile main.c, i.e. linking shared library lvrt when loading main program:
    gcc -Wall -I /usr/local/lv71/cintools/ -o main main.c hello.so -l lvrt
    The LD_LIBRARY_PATH has been defined and exported:
    $ LD_LIBRARY_PATH=$PWD
    $ export LD_LIBRARY_PATH
    IT WORKS!
    Program main2.c:
    // small program to call a LabVIEW shared library
    #include
    #include
    #include
    int main(void)
    void * h_lvrt;
    void * h_hello;
    void (* hello)(void);
    char * error;
    printf("Hello from C!\nLets call LabVIEW now\n");
    // open LabVIEW RunTime shared library
    // in my computer located at /usr/local/lib/liblvrt.so
    h_lvrt = dlopen("/usr/local/lib/liblvrt.so", RTLD_NOW);
    // check for error
    error = dlerror();
    if (error) {
    printf("error : could not open LabVIEW RunTime library\n");
    printf("%s\n", error);
    return 1;
    // open hello shared library
    // in my computer located at /home/darss/lv_call/hello.so
    h_hello = dlopen("hello.so", RTLD_NOW);
    // check for error
    error = dlerror();
    if (error) {
    // close LabVIEW RunTime shared library
    dlclose(h_lvrt);
    printf("error : could not open hello library\n");
    printf("%s\n", error);
    return 1;
    // get function hello from library hello.so
    hello = dlsym(h_hello, "hello");
    // check for error
    error = dlerror();
    if (error) {
    // close hello shared library
    dlclose(h_hello);
    // close LabVIEW RunTime shared library
    dlclose(h_lvrt);
    printf("error : could not get the hello function\n");
    printf("%s\n", error);
    return 1;
    // call hello function
    hello();
    // close hello shared library
    dlclose(h_hello);
    // close LabVIEW RunTime shared library
    dlclose(h_lvrt);
    printf("Bye ... \n");
    return 0;
    The command to compile main2.c, i.e. dynamically linking library lvrt at execution of main2 program:
    gcc -Wall -o main2 main2.c -l dl
    The LD_LIBRARY_PATH still defined and exported.
    IT DOES NOT WORK!
    Program output:
    Hello from C!
    Lets call LabVIEW now
    error : could not open hello library
    /home/darss/lv_call/hello.so: undefined symbol: WaitLVDLLReady

  • How can i use my synology iTunes Server with the iTunes from my iPad?

    Have anybody the Same Constalation @ home? I like to have Access to my synology iTunes Server from my iPad via iTunes without a thirdparty App, to have Access to the Central Data like Music, etc.? Have some One expirence with the configuration and implementation?

    It will almost certainly not be possible. If you don't sign up for AT&T service for the iPad, then replace your Sprint card with a MiFi or Overdrive device from Sprint. This will use your Sprint service, but connect to your iPad using Wi-Fi. It also has the advantage of you being able to use it with any Wi-Fi capable device. IOW, you can use both your laptop and iPad at the same time with the MiFi or Overdrive, but only have to pay for one Sprint account. Of course, all devices that connect to the MiFi or Overdrive will use up your 5GB allotment, unless you use Overdrive in a 4G area. (Overdrive is unlimited on 4G, but has a 5GB cap in 3G areas.)

  • How can i use an external hard drive with my ipad

    I just got a new ipad 2 I am trying to see it is possible to connect a external hard drive to take  my picture and documents with me.

    Basically you can't, though there are a few (fairly expensive) drives coming onto the market which are said to be compatible. There is no USB port on the iPad, and the optional camera connection kit is only for the transfer of photos/videos, so wouldn't recognise other file types - if you were able to connect a drive via it then the drive would need it's own power source, the photos would have to be in a specific format, and there is still no guarantee that it would work.
    There are apps available for the iPad which can use/access cloud services such as Dropbox.

Maybe you are looking for