Can I use an interactive PDF created in InDesign in Muse?

If I make an interactive PDF in InDesign can I then import it into Muse?

And do what with it? You might want to ask in the Muse forum.

Similar Messages

Adjust standard font (Times new Roman) in an interactive pdf created in Indesign

Could anybody please help me out?
Is it possible (and if so, please tell me how) using Indesign CS6 for creating an interactive form:
- to choose a font (i.e. arial) and have this being exported as interactive pdf (instead of the regular used font Times Newe Roman)
Thus having users to fill in this created form (interactive pdf) using the (by me chosen) font.
Thanks in advance!
Marieke

Hi Bob,
Thanks for your swift reply!
The funny thing is that; if I open the created pdf from Indesign in Acrobat Pro and try to make a change, my program collapse and shuts down...) :
Regards,
Marieke

Interactive PDF created in InDesign CS6 crashes Acrobat XI

Just finished laying out an interactive document in InDesign and exporting to as an interactive PDF to Acrobat. The document is 48 pages and has 3 pop-up TOC's for each of the 3 sections. There are several other hyperlinks, top and bottom nav menus. The document opens fine but when we try to open either of the TOCs Acrobat either crashes or the menu will pop up with buttons not visible. I have gone through the document several times and rechecked all button settings. Everything appears in order. The document navigates perfectly in SWF preview and when exported as a SWF or HTML. Can't figure out where the glitch is. I'm in the Cloud so have the latest versions of all software. The project is on a very tight deadline and is part of a presentation in 2 days. Has anyone else had this issue? If so, how did you resolve it? Please help.

Made each menu item a separate text frame and created text anchors/destinations. In buttons and forms panel, set event to go to destination "on release or tap" and chose "hidden until triggered." For each menu there's also a close button. Set "show/hide" for menu items and close button and set the main button that opens the menu to "show" the entire TOC. Each of the TOCs are on their own layers. Very straightforward, nothing fancy.

Is possible in acrobat reader fill in and save interactive PDF created with LiveCycle Designer?

is possible in acrobat reader fill in and save interactive PDF created with LiveCycle Designer?

Hi,
Only if the form has been Reader Enabled before it is sent out to the user with Reader.
There are two ways of Reader Enabling the form. One using Acrobat Standard v9 or Acrobat Professional v8 (both have license restrictions). The other is to use LC Reader Extensions ES2, which is a server product (additional costs).
Some info here:
http://www.assuredynamics.com/index.php/2010/11/using-livecycle-forms-in-acrobat-and-reade r/
A search of the forums for "Reader Extensions" or "Reader Enable" will give more information.
Hope that helps,
Niall
Assure Dynamics

Can we use custom RFC in creating models in Visual composer??

Dear Experts,
Can we use custom RFC in creating models in Visual composer??
If yes, kindly provide some documents or links which would guide me how to achieve it.
Warm Regards
Upendra Agrawal

Hi,
Yes,you can do it.
Configure the rfc and use like others Standard BAPI procedure.
[https://www.sdn.sap.com/irj/scn/wiki?path=/display/vc/connectivity]
Regards,
Govindu

Hi can I use apple pages to create a line or scatter graph ?

Hi can I use apple pages to create a line or scatter graph ?

If you need to see the legal document that makes this OK see this Apple document, section 2C

Which user exit can be use before production order creating?

which user exit can be use before production order creating?
i want to check AFPO data,then show error message before production order creating.
1.i try to use PPCO0001( enhancement when saving the order) to check AFPO data, then show some error message,sap system will generate a abap down error.
2.i try to use PPCO0007(Exit when saving production order),
i can show error message,but i can't check AFPO's data.

Hi,
You can access AFPOD structure using field symbols.
Try below mentioned code in routing:
constants: c_afpod TYPE char30 VALUE '(SAPLCOKO1)AFPOD' .
FIELD-SYMBOLS: <fs_afpod> TYPE ANY .
data: wa_afpod TYPE afpod.
ASSIGN (c_afpod) TO <fs_afpod>.
wa_afpod = <fs_afpod>.
Then later you can use wa_afpod in exit PPCO0007. Hope this will work for you.
Sumit

Can i use adobe export pdf on an imac? [was: brian newcombe]

Can i use adobe export pdf on an imac?

Hi Brian,
Welcome to Adobe Forum,
ExportPDF is an online convertion program. It is not OS dependent. You can use this service anywhere. You would just require a web browser and working internet connection.
Let me know if you have any other question.
Regards
Rajshree

What kind of inforobject can be used for compounding while creating charac

Hi all :
     what kind of standard inforobject can be used for compounding while creating characteristic ?
    I found that some could be , but some couldn't , like 0RESP_PERS.
THE ERROR :
1      Characteristic 0RESP_PERS was included in the compounding for COS09 (-> Long Text)      QLong text exists
2              0RESP_PERS is just an attribute and is not allowed in the compounding No long text exists
0RESP_PERS is an object, why can't be used for compouning?
Could you please tell me why ?
   Thank you very much!
Edited by: jingying Sony on May 10, 2009 7:05 AM

Hi Jingying Sony,
One can mark an infoobject as an Attribute Only in the General tab.
This means that the infoobject will only act as an attribute and cannot be used as a characteristic in infocubes. Neither can it be used as a navigational attribute and I guess it may not be available for compounding then(since in compounding - it implicitly becomes a characteristic).
For your ref
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
If you uncheck this checkbox, then may be it will allow you to compound this characteristic..
You may try with a (self created) ZRESP_PERS reference chararacteristic of 0RESP_PERS, to confirm this.
One more link for your reference
http://jgtang82.javaeye.com/blog/191795
Hope this helps,
Best regards,
Sunmit.

PDF (created in Indesign CS4) separates in CMYK, in stead of PMS

I have sent a PDF, created in Indesign CS4, to the printer. I need the design to be printed in PMS colors, but the printer says the PDF color separates in CMYK, not PMS colors.
I'm at my wits end trying to find where I went wrong (I should add I'm a beginner at all this). I need help...
Here's what I did:
I have changed the colors in a CMYK based design of a business card to PMS colors. I have changed the colors of an Illustrator file that is used in the design to PMS colors as well.
When I look at the separations preview it looks fine, only PMS colors.
I then created a PDF, using the [High Quality Print] Adobe PDF preset. In Output Color Conversion is set to 'No Color Conversion'. In the Ink Manager 'All spots to process' is not checked. CMYK inks are visible in the Ink Manager, but so are the Pantone Inks I used.
I noticed one strange thing, the swatch options for Pantone Process Cyan C are different thatn those in other PMS colors, the Colortype is 'spot' but the Color Mode is CMYK, greyed out so that I can't change it to Pantone Solid Coated. Even weirder, I can't delete that strange swatch. I tried adding the pantone colors to my swatches again, in a different file, I added Pantone Cyan C and it looked fine, but when I reopened the swatch options it was strange again.

Yes, I have added cropmarks and page info to the pdf.
I checked the separations in Acrobat Pro with a friend. Both Pantone colors and CMYK show up. When I disable the CMYK, nothing of the design disappears (cropmarks and page info don't disappear either, they seem to be in both Pantone and CMYK).
I saved a new pdf, without crops and page info, and CMYK still shows up in the separations.
I'll contact the printer tomorrow, I'm pretty sure he should be able to use the file I sent him.
Thank you all for your help!

Two page display of pdf created in InDesign CS4 js

Hi, I need to set page desplay for pdf created in InDesign to two page view and I couldn't find anything like that in OMV. I assume it will be setting preferances for Matadata. Would you be able to help me.
Thank you.
Yulia

@Yulia:
You can set all "open"-options with Acrobat Pro and you can automate this with a batch process under "Advanced => Document Processing => Batch Processing".
Also there is a way to do that through pdfmark instructions inside a placed EPS. Documentation for doing a "Two-Up (Cover page)" with pdfmarks is not available in the pdfmarkReference_v9.pdf for the PageLayout-tag. And of course you have to use Distiller to get the pdfmarks working, no chance doing that trick with PDF export.
Here is the pdfmark-code for an EPS you can work with (found and adapted it from the "PostScript & PDF-Bible" by Thomas Merz and Olaf Drümmer):
%!PS-Adobe-3.0 EPSF-3.0
%%BoundingBox: 0 0 72 72
%%EndProlog
/pdfmark where {pop} {userdict /pdfmark /cleartomark load put} ifelse
[ {ThisPage} << /Trans << /S /Dissolve >> >> /PUT pdfmark
[ {Catalog} << /PageLayout /TwoColumnRight >> /PUT pdfmark
%%EOF
Save the code as a plain text file with the ".eps" suffix. Place it on any page you want to print of your InDesign layout, write a PostScript file and distill it to pdf. You should get a "Two-Up" view when opening it in Acrobat.
Meanwhile (after doing a little research on the web) it seams that all possible "/PageLayout" parameter pairs are indeed documented, but not in the pdfmarkReference_v9.pdf, but in the PDF32000_2008.pdf on page 73:
SinglePage     Display one page at a time
OneColumn     Display the pages in one column
TwoColumnLeft     Display the pages in two columns, with odd-numbered pages on the left
TwoColumnRight     Display the pages in two columns, with odd-numbered pages on the right
TwoPageLeft     (PDF 1.5) Display the pages two at a time, with odd-numbered pages on the left
TwoPageRight     (PDF 1.5) Display the pages two at a time, with odd-numbered pages on the right
Default value: SinglePage.
Uwe

The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC

The thumbnails/previews of PDFs created in InDesign CC look dull or cloudy in Bridge CC. The actual files are fine and open with the correct rich colors, but the colors don't look as vibrant as they should when viewing in Bridge. It's only PDFs that are affected. The InDesign thumbnails/previews display correctly in Bridge.
This was not happening when I was using CS6. This is only a problem since the upgrade to CC.
Any help you could provide would be appreciated. Thanks!

If you're going to mess with the registry
- create a restore point http://windows.microsoft.com/en-ie/windows7/create-a-restore-point
- backup the registry http://windows.microsoft.com/en-us/windows/back-up-registry
I absolutely plead with all my heart - don't start changing registry entries unless you know what you're doing - or ask your IT department to take a look.
If you don't have an IT department, then source a good professional that can make these changes.
If any way unsure - then under any circumstances, - do not mess with the registry.

Examples of interactive PDFs generated from InDesign

Where can I find examples of interactive PDFs generated from InDesign? I offered it as a solution to a customer and they would like to see examples. All I am finding are tutorials. Thanks!

AdobeAcrobatShowcase

How do I create a print button for use in Interactive PDF?

I have a document created in InDesign CS4 which I will be converting into an interactive PDF (which has various links added on a master page so they appear on every page), one of which I would like to be a "Print" button.
I know how to do this in Acrobat Pro, but I don't want to have to create a button in Acrobat and then copy/paste it onto all pages in my document. Surely there must be a way to create a button of this type in InDesign CS4. Any help would be greatly appreciated.

Sorry, no. Print button functionality must be added in Acrobat.

Video is not loading in Interactive PDF created using Indesign 6.0

Hi All,
I am adding the mp4 video within the Indesign 6.0 and when I convert the same into the interactive PDF format but video are not loading at all in iPad. I have added the custom HTML tag as object but still its negative results.
Please help me out if you have any suggetions on how we can have the video running in interactive PDF on iOS.
All your help is very much appriciated.
Thanks & Regards,
Sumanth C N

Not all readers on an iPad can show video! In fact Adobe Reader cannot! You must third-party apps. The best is PDF Expert from Readdle (US $10).
This article explains this issue:
For Interactive PDF, Not All Readers Are Equal | InDesignSecrets

Can I use an interactive PDF created in InDesign in Muse?

Similar Messages

Maybe you are looking for