Can I use an old actiontec router as an access point in another room?

Hey folks, sorry to create another post but  I need some help and I didn't know where else to go.
Okay so I have my old actiontec GT704-WG router lying around from when I used to have regular high speed internet. I was wondering if I could hook that up in the top floor and be able to have my wifi devices (iphone, ps3, laptop, etc...) connect to that, instead of the fios router all the way in the basement. Of course, I would want it to connect to the same network as it would if I connected directly to fios router. But I wanna know if this is possible?
If it is possible, what would I have to do in order for my wifi devices to connect to it?
Thanks!

farahm2 wrote:
Hey folks, sorry to create another post but  I need some help and I didn't know where else to go.
Okay so I have my old actiontec GT704-WG router lying around from when I used to have regular high speed internet. I was wondering if I could hook that up in the top floor and be able to have my wifi devices (iphone, ps3, laptop, etc...) connect to that, instead of the fios router all the way in the basement. Of course, I would want it to connect to the same network as it would if I connected directly to fios router. But I wanna know if this is possible?
If it is possible, what would I have to do in order for my wifi devices to connect to it?
Thanks!
You would have to connect it via an ethernet cable, lan port to lan port, as I don't believe it's possible to connect it wirelessly.
To connect wirelessly you would need a wireless bridge.  You could get an old Linksys wrt54g router that supports DD-WRT and flash the firmware on that to convert it into a wireless bridge
http://www.dd-wrt.com/wiki/index.php/Wireless_Bridge
however I believe you would not be able to connect wirelessly to the linksys as it's now running as a bridge. 

Similar Messages

  • Using an old AEBS as a printer access point

    I would like some help please on how to configure an old (2006 UFO) Airport Extreme Basestation as a wireless hub I can use to plug some printers into for printing over a wireless network (if it can be done). I'm using Airport utility 5.3.1.
    I recently purchased a 500GB Time Capsule which acts as both a backup device and my ADSL wireless router. This made my old Airport extreme redundant, but I want to use it as a wireless printer server. But I'm a bit stuck on how to configure my Airport network and Apple support and a local reseller haven't a clue!
    To start with I setup my Time Capsule device, connected it to my D-Link ethernet modem and everything is working fine. I then reset the old AEBS which creates a new wireless network called Apple Network a78a67. I then switched back to my Time Capsule network and did the following in Airport Utility to Time Capsule:
    - Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    - Click AirPort in the toolbar, and then click Wireless.
    - Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    I applied the settings and restarted the device. Then I switched back to to the new Apple Network a78a67 created through reseting the AEBS. This is the bit that makes little sense to me...
    - Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    - Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    - Enter the base station network and base station password is necessary.
    - Click Update to update the base station with new network settings.
    The problem being that I DO NOT have an option to choose “Extend a wireless network” from the Wireless Mode pop-up menu. The only two options I have are to "Create a Wireless Network" or "Participate in a WDS Network". Likewise there are no options to choose a network name from a pop-up menu. So although I can configure and switch between two wireless networks, it seems the two devices don't want to talk with one another, thus I have two wireless networks.
    What I want to do is to have one single wireless network - with Time Capsule providing internet access and the AEBS providing wireless printer access.
    I have tried configruing the AEBS using the "Participate in WDS Network", but on saving the settings an error message is displayed regarding a lack of WDS Nodes???
    Can anyone advise please?

    willonamac wrote:
    Thanks for your help and advice. I got there eventually in a roundabout way! At one point I was given an error message stating that the configuration could not be retrieved from the Time Capsule. Then the internet connection via the modem was lost. But after a couple of intensive restarts, both units appeared under the same network and I can see my printer connected now.
    I've seen this with AEBSs when changing their configurations, too. Glad you got round the problem in the end.
    One more question through, I've connected a 4 port USB hub to the Airport Extreme Basestation but I can only get one printer to show up at a time under System preferences and Airport Utililty. Is this because the USB hub being used is not self powered or because this model of Airport Extreme only allows connectivity to a single printer at any one time?
    I think it is because you can only use one printer at a time with this model. See this knowledge base article for details. You likely have firmware version > 5.5 but I'm guessing don't have the relevant AEBS model. Take a look, though.
    - cfr
    Many thanks!

  • I currently use a mifi device to connect my laptops to the internet, can I use the iphone 5c as an internet access point for them

    Can the iphone 5c be used as a router to connect my laptop to the internet???

    Yes, but it depends on what plan you have.
    What plan name do you have as stated on your bill. If it says More Everything, the hotspot functionality is already included.

  • Can I use my Apple TV as an WLAN Access Point?

    In my Basement I have a LAN Connection but no WIFI and no Cellular. Therefore I would highly appreciate if I could use connect my iPad via WLAN with the Apple TV and to get Internet access which is routed thru the Apple TV.
    So I am looking forward for upcomming Updates.

    .... maybe it could be an Idea to add this functionality.
    So Apple TV could combine the functionality of
    AirPort Express     http://www.apple.com/airport-express/
    and WLAN Repeater
    e.g. http://www.avm.de/de/Produkte/FRITZ_WLAN/FRITZ_WLAN_Repeater_300E/index.php
    or
    http://www.avm.de/de/Produkte/FRITZPowerline/index.php

  • If i purchase a new airport base station can I use my old airport extreme 802.11n (3rd Gen) as both an extender of my wife for multiple iphones and as a router?

    I operate an old airport extreme base station 802.11n (3rd gen).
    There are 4 iphone5's and 1 iphone4 on my network along with 2 laptops running 10.6.8 and 10.7 respectively as well as two desktops with the same configurations as the laptops.
    I get a sense that the iphones may/will be useless the new airport.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    Thank you.  

    I get a sense that the iphones may/will be useless the new airport
    They will work fine with a new AirPort base station. You can use an iPhone or iPad to set up and configure the new base station. If you want to use a Mac to set up and configure the new AirPort, it will need to have at least Lion 10.7.5 installed. Mountain Lion 10.8 or Mavericks 10.9 could be used as well.
    Can I use the old base station (operating as an extender/bridge/router) so that older equipment will operate in the short term until they are upgraded?
    You can use the older AirPort base station to extend the wireless network. No updates will be needed to your iPhones or Macs.

  • How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    How can I use the old Apple TV with new iTunes?  It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync.  I can access the iTunes Store fine, just none of my Library

    read this
    https://discussions.apple.com/message/20429789#20429789

  • Can I use my old mac mini  (G4) as an optical drive with new mac mini late 2014?

    Can I use my old mac mini (G4 Tiger) as an optical drive with new mac mini, late 2014?

    I think so
    DVD or CD sharing: Using Remote Disc - Apple Support
    You should also be able to connect the two via FireWire using a FW 400 cable plugged into the old Mini, thne a FR 400 femial to FW 880 adopter plugging into a FW to Thunderbolt adopter
    How to use and troubleshoot FireWire target disk mode - Apple Support

  • Can i use an old eprint email account with a new printer?

    can i use an old eprint email account with a new printer?

    Hello arbazu,
    Unfortunately, when setting up a new/replacement printer, you wont be able to use the same email address, nor can it be transferred to another printer. Once an email is used, the email address itself is not able to be used for a certain period of time (which I believe is 6 months).
    However, by creating a new email address, but adding an 01 or 02 at the end, you can get something very similar to what you had previously.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How can I use my old imac24" 2008, with my. New iMac 21,5" as a monitor? What camble do I need ? new iMac

    How can I use my old mac 24" as a second monitor? What cable do I need?

    https://discussions.apple.com/docs/DOC-6351 may offer some techniques.

  • Can I use my old apple speakers with my new I mac

    Can I use my old apple speakers with my new I mac

    If they are the old clear globe speakers that worked with old G4 models, then no.

  • Can I use my old apple monitor with a new mac mini?

    Can I use my old apple monitor with a new mac mini?

    Probably.  Any information about the monitor?

  • Can I use my old macbook as a disk drive for my new iMac?

    My husband just bought me a new new iMac (yey!) but had assumed it would have a dvd drive (as you do).  It doesn't.  So can I use my old Macbook to upload cds and dvds and somehow import to my itunes on my new computer?

    As long as your Macbook is up-to-date.  Go to system preferences>Internet and Wireless>Sharing>check mark CD/DVD sharing.

  • HT4864 Can i use my old email address on ICloud?

    Can i use my old email address on ICloud?

    iCloud mail handles only its own emails - you can't collect mail from other accounts as you could with MobileMe - so all you can do is set up forwarding from other accounts to iCloud. However you can only use the iCloud address as the 'From' address when using its outgoing server, so when you are using your Mac or iPhone you are better off setting up other accounts separately in the Mail app. Only when using iCloud webmail will this then be an issue.

  • How can I use my old iPhone 3G as an iPod touch?

    How can I use my old iPhone 3G as an iPod touch?

    See Here for Details...
    Use iPhone as an iPod
    http://support.apple.com/kb/HT3406

  • Can I use my old Macbook Pro as an external disc drive while installing Windows 7 through boot camp?

    I want to install the Windows 7 CD on the newest version of the 2013 Macbook pro 10.9.2 running OSX Mavericks, through Boot Camp.  It does not have a disc port, nor do I have an external disc drive....but I do have an older macbook that does have a disc drive and I know you can supplement it for an external disc drive.
    My question is can I use my old Macbook pro's as an external disc drive for the installation of Windows 7 in Boot camp? Will this be a problem? Or do I have to buy an external disc drive separately.

    http://support.apple.com/kb/HT5287

Maybe you are looking for

  • Rel="stylesheet" in template causes Contribute to crash

    After years of no problems with their site, my client was suddenly unable to login to their site using Contribute 3. Contribute would crash during "Updating Templates" screen. The problem turned out to be a rel="stylesheet" in an absolute link to a s

  • Exporting PDF's inspite of secure password controls

    I just paid $20 to export a secure doc. Stupid me right. Of course it didn't work and Adode is no help because they don't want people editing docs they have allowed people to set passwords for in the first place.  Has anyone figured out how to get ar

  • Disable profit segment in the billing document

    Hi experts, I'd like to know if it's possible to disable the field profit segment in the billing document. I need to post amounts from taxes in cost center , but as the profit segment is enable in billing document, the amounts are posted in CO-PA. Th

  • When I purchased monthly subscription Acrobat XI pro

    I was told by the Technical department that I could not download because of the operating Vista system. The customer services selling the product did not have the clue when they charged me!

  • B2B. Enhanced version of the CRM organizational model

    Hi, We use B2B with sales order. We works with standard org. structure. Enhanced version of the CRM organizational model. http://help.sap.com/saphelp_sm40/helpdata/en/32/4473211b7778428efebc865e351cb4/content.htm Does B2B works fine with Enhanced ver