Can I use anonymous access for XDB webfolders?

Version info:
Oracle 11.1 running on Windows 2008 server.
Clients are still on Windows XP.
Q1:
Is it possible to create a webfolder into XDB on the client in such a way that you need not supply a database username and password? Using the anonymous user account?
If not, (related) Q2:
Is it possible to create a webfolder into XDB on the server once (with a username and password), and then use some Windows folder sharing technique to access the server-hosted webfolder via the XP clients? (I guess this is a Windows question, not really Oracle XDB...).
I need to setup XDB webfolder access from many clients, and am looking into ways such that I won't need to configure database username/passwords on all clients.
Thanks,
Toon

ad 1) In principle "yes", although not advisable. You would open up the database for all
Would be along the lines of
- create a user
- create a /home/USER folder
- create ACL that grants access via anonymous, role, db user via USER
- assign ACL to /home/USER
could do this also combined with externally defined, LDAP or proxy accounts.
ad 2) Not sure if Windows would allow it, but I am guessing that it is doable, if not only on Linux via DAVFs / Samba
Edited by: Marco Gralike on Jun 22, 2011 7:32 AM

Similar Messages

  • Anonymous access for just one page

    Does anybody knows how can i enable anonymous access for just one page, other pages must be available for only logged in users.

    Actually it is "LightHouse Pro" project. And I don't understand some things in it. It Has a UserControl with a query that just check credentials and returns bool value if credentials are right. But i can't find the way it defines whether i need to secure page or not.

  • Can I use one account for both my labtop and my ho...

    can I use one account for both my labtop and my home computer?
    Solved!
    Go to Solution.

    Softthunder wrote:
    can I use one account for both my labtop and my home computer?
    Hello,
    Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How can I use Microsoft Access on my Mac? Boot camp?

    How can I use Microsoft Access on my Mac? Boot camp?

    Running Windows or using a suite such as Libre Office. It is similar to Office 2007 for Windows, but runs on a Mac, and contains a database manage that is Access compatible.

  • How can I use Microsoft Access on my Mac?

    How can I use Microsoft Access on my Mac Pro?

    Welcome to Apple Support Communities
    Microsoft Access isn't available for OS X, so you can't use it. If you need it, you have to install Windows on a virtual machine.
    On a virtual machine, you can install the Windows version you most like and the Access version you need, so you won't have any problem using it. You just need a full Windows version with its DVD or ISO image and product key, and an application like Parallels, VMware Fusion or VirtualBox to create the virtual machine. If you want to save money, System Builder versions are cheaper and you can find them at Amazon or NewEgg.
    As you have a Mac Pro, I suppose you won't have any problem using a 64-bit version, but it's important you have enough memory. Open  > About this Mac, and check how much memory you have. I recommend 4 or 8 GB of memory at least.
    After installing Windows on the virtual machine, you will be able to install Access there.
    There are applications for OS X that allow you to run Windows applications without having to install Windows. Those apps often fail, so I don't recommend you to use them

  • How can I use MS Access in Lab View

    how can I use MS Access in Lab View
    Its urgent

    There are a couple of routes you can take to communicate with MS Access in LabVIEW. The preferred method is our Database Connectivity Toolset. This allows you to use VIs to communicate with your database. Here is a link to the product for more information.
    http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
    Your other choice would be to use ActiveX. I believe there are a couple of examples on our web site using it. Overall you will probably spend a lot more time taking this route.
    Matt Kisler
    Applications Engineer
    National Instruments

  • Access Denied Error on replying to a discussion board Post using anonymous access in sharepoint 2013 .

    Hi ,
    We are facing issue while replying to a post in Discussion board using Anonymous access users in Sharepoint 2013.
    WE are able to post a discussion using anonymous acess but not able to reply to the discussion post.
    Steps Performed  - :
    1. Enabled Anonymous access at Web application Level .
    2. In SiteCollection > Site Permissions > Anonymous Acess > Enable for List and Libraries .
    3.  Disable ViewFormPAgeLock Feature .
    4 .Go to Discussion board List >Permissions > Break Inheritence .
    5 . Given Add ,Edit and View item permission to anonymous users .
    6 . "Create and edit all items " Discussion Board Library Advanced Settigs  .Infact ,Neither option is working .
    Please suggest if we are missing soming .Please help
    Thanks
    Mayank

    Hi,
    According to your post, my understanding is that when you went to the Discussion List and selected the thread then view the list in “Flat” view, the Spelling ICON was greyed out.
    By design in SharePoint, when you view the list in “Flat” view, the ribbon would be as below:
    Only when you add a reply and move the mouse to the content, the Spelling ICON will appear.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • TS3988 It seams that i have another Apple ID, how can i use only one for everything?

    It seams that i have another Apple ID, how can i use only one for everything?

    http://support.apple.com/kb/HT5622?viewlocale=en_US
    -The specific point:
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

  • Cisco 3750X -- 10G uplink - Can be used as access port?

    Dear All,
    I have small question, I am planning for Cisco 3750X with 10G SFP+ service module. I want to know that whether it can be used as Access Ports connecting to server as this is mostly used as uplink port.
    Thank You,
    Abhisar.

    Disclaimer
    The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.
    Liability Disclaimer
    In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.
    Posting
    Well if you want to connect anything with 10g to a 3750X, you're limited to using a module with 10g ports. 
    Other than 10g capability on some module cards, something to note, the module ports, I believe, are supported by larger buffers (including the gig module ports).
    As the others have noted, you can use any port for any purpose.  However, if you connect a server to a 10g port, be aware you might start to see drops on your other host (gig) ports as the server will now be able send faster than the host port can receive data.  To minimize this, you might either disable QoS on the switch (providing maximum buffers to all egress traffic) or you might need to tweak buffer resource settings (the default settings often drop some packets, when there are bursts, of default marked packets).

  • Can you use a 3600 for an Ethernet bridge??

    Can you use a Cisco 3600 to do a P2P bridge? Using the MAP's ethernet port  to connect to a remote LAN?  On that remote LAN can you have  lightweight APs that connect to a controller on the RAP side?

    Can you use a 3600 for an Ethernet bridge??
    http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/configuration/guide/cg_mesh.pdf
    Check - Converting Indoor Access Points to Mesh Access Points
    Ethernet bridging has to be enabled for the following two scenarios:
    1. When you want to use the mesh nodes as bridges.
    2. When you want to connect Ethernet devices such as a video camera on the MAP using its Ethernet port.
    Wireless Backhaul:
    In a Cisco wireless backhaul network, traffic can be bridged between MAPs and RAPs. This traffic can
    be from wired devices that are being bridged by the wireless mesh or CAPWAP traffic from the mesh
    access points.
    Guidelines For Using Voice on the Mesh Network
    • Voice is supported only on indoor mesh networks in release 5.2, 6.0, 7.0, and 7.0.116.0. For
    outdoors, voice is supported on a best-effort basis on a mesh infrastructure.
    other factors to note:-
    #you would be running on backhaul using A radio which is prone to DFS.
    #CAPWAP may not tolerent enough with AWPP convergence on MAP roaming.
    #CAPWAP is more latency sensitive than voice.

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Can I use touch ID for App Store without using a passcode?

    It seems that the ony way I can use the touch ID for App Store and iTunes is if I have a passcode to get into my phone. I don't want a passcode, it get in and out of my phone too often to have to unlock it all the time and I hate manually typing in my password for App I buy. Why can't it do both, isn't the touch ID just as secure for purchases even if you don't have to unlock the phone to get to it??

    From the article:
    You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
    So yes, that's how it's designed. You must have a passcode, though as long as you understand the caveats:
    In addition, you will need to enter your passcode to unlock your iPhone in these conditions:
    After restarting your iPhone 5s
    When more than 48 hours have elapsed from the last time you unlocked your iPhone 5s
    To enter the Touch ID & Passcode setting
    and
    You can't use Touch ID for purchases if Require Password in Settings > General > Restrictions is set to Immediately.
    you should be able to use Touch ID without needing your passcode. If none of those circumstances is true and you're still being asked for your passcode to make a purchase from the iTunes Store, it would seem that something is amiss with your iPhone.
    Regards,

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • Can I use same account for android and PC and how ...

    Can I use same account for android tablet and PC and how do I link both?

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

Maybe you are looking for