Can I use any acquistion card with Labview?

I have got a non NI acquistion card, how can I use LabVIEW to program it?

> But are all the software drivers provided by vendors recognized by
> LabVIEW? In other terms, must these drivers get a satandard
> architecture or protocol so LabVIEW can communicate with them? Or, if
> I develop my own acquisition card, how can I write it's driver so
> LabVIEW can communicate with it?
The LV drivers for various NI products are essentially VIs that call
into a user level DLL. That DLL does its work and returns the results
and/or error info to the diagram.
If the board has a DLL that allows it to work, then you can make quick
wrapper VIs to make it fit the LV language a bit better.
There are no architectures or protocols for drivers to replace NI-DAQ or
other NI driver wrappers.
Greg McKaskle

Similar Messages

  • I want to use the sound card with LabView

    Hi. Who can help me, I want to use the sound card with LabView, I have found the function but I can't use it. Thanks.

    Christi,
    In LabVIEW 6.1 I found some examples they use those sound VIs. They are located in \examples\sound folder. Those examples should give you a good overview how to use the VIs.
    Hope this helps
    Roland

  • Can I using any SIM card at any where in my IPhone4 when I purchase from South Africa Vodacom ??

    Can I using any SIM card at any where(even oversea's sim card) in my IPhone4 when I purchase from South Africa Vodacom ??

    You are correct, I did a little digging as well.
    Here is an official Apple document that confirms what Lucas found.  That way you can see the information directly from the source itself.
    http://support.apple.com/kb/HT1937

  • Can  i use SLE4428 smart card with java card developmentkit 2.1.2

    Can i use SLE4428 smart card with java card developmentkit 2.1.2
    plz reply

    No. SLE4428 is memory card and not Java Card.

  • Can you use any external display with a macbook?

    hi all,
    I was just wondering, can you use any external display with a macbook? (i.e. gateway, and dell displays?)

    To original poster:
    Yes.
    Provided you have the appropriate ports and cables, that is. Some monitors do not have all vga, dvi-i, dvi-d, hdmi, etc. ports, and it can be misleading that all those technologies appear to be compatible via conversion cables (they aren't all meant to be compatible, so look it up on the internet before buying).
    Cheers,
    Sylvain
    MacBook   Mac OS X (10.4.9)   dual boot Vista Ultimate

  • Can I use my credit card with a foreign iTunes Store.

    Hi,
    I am currently living in Malaysia.
    I was originally using the Singaporean iTunes Store, and I have many apps purchased from that store.
    My question is: can I use my Malaysian Visa with the Singaporean iTunes Store?
    I previously used a Singaporean Visa credit card for purchases.
    is it possible to use a Malaysian Visa card for purchases as well?

    The Complete Guide to Using the iTunes Store
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."

  • 3000 usd reward for the one can provide me any JAVA card with AES

    Hello,
    i am quite desperate, i am trying to find 1000-2000 java cards (schlumberger or jcop) with AES enabled. Seems this cards are really hard to find, i got allready offers and samples but all of them without AES enabled.
    I am willing offer 3000 USD reward to the person can give me the right contact where i can get those cards (at least 1000 pices) till 25-th of September. I got allready one offer from sagem orga for jcop, but their delivery time is 4-6 weeks, so it must be some one have such qtty of cards fizicaly on hand ready to ship.
    Please contact me by PM or phone (+852-6723-9999) or post here your contact details and i am calling you back.
    Thanks and best regards,
    Razvan

    @clemson
    i also have offer from sagem orga, delivery time 4-6 weeks, the point is that my customer does not understand that it is just a question of luck to find some one with cards on stock, he wants his goods fast. I have told him from begining not to stick on one specific card, but he preferred using jcop. I got some jcop from an analphabet, 10K pcs, jcop41 and this analphabet promised us to deliver us version 2.3.1, but the cards he delivered to us were 2.2.1 and those do not have AES !!!
    This is the reason why i am offering this reward. Maybe some one knows some one who have stock of 1000-2000 pcs. Now my customer does not mind to use ANY JAVA CARD which have AES. He don't mind if those cards are from Oberthur, Nxp, Gemalto, Giesecke & Devrient, or other manufacturer. His requirements are: a) must be java card b)must have AES other features are not important.
    Reagards,
    Razvan

  • Can I use multiple credit cards with family sharing

    My kids are adults.  Can I use multiple credit cards in family sharing so they can pay for their own purchases?

    Hello Cwb1234,
    Thank you for using Apple Support Communities.
    From what I understand, you want to set it up that your kids use their own credit cards for purchases within Family Sharing. Take a look at the article linked below, it outlines purchases and payments for Family Sharing and may offer a solution to the issue that you’re running into.
    Family purchases and payments - Apple Support
    Making purchases
    After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
    Once paid for, a purchased item is added to the account of the family member who initiated the purchase. In other words, the content belongs to them, much as it would if you were buying them a book or a DVD. If Family Sharing is ever disabled, each member will keep the purchases they initiated, even though they were paid for by the family organizer.
    These are the only current options for payment within Family Sharing.
    Regards,
    Jeff D. 

  • I can't use my debit Card with my Apple ID.

    Help Me Please. i can't use my debit card pay for iTunes store
    "This credit card cannot be used with iTunes Store. Please use another credit card."
    if you lock my debit card please unlock if you can. thank you 
    <Personal Information Edited by Host>

    The debit card must be the type of debit card that can also be used as a credit card and contains one of the logos listed in that article (Visa, Mastercard, American Express, etc.). Otherwise, that would be correct.
    Having familiarity with the message the OP is receiving, he/she can contact the iTunes Store directly to inquire about why the message is being received, and they may be able to provide some clarification on what is going on. In the meantime, a different card that has one of those logos that is applicable for their country of residence will have to be used.
    If the message says something alone the lines of "your credit card was declined," it would be an issue that would have to be resolved by the financial institution instead.

  • "How to use an Appplicom card with Labview and a Seimens PLC"

    Hi, I am using an applicom card type PCI1500-PFB to communicate with a Seimens S7-300 CPU315-2DP plc. I am using this simply to display in a labview front panel the outputs of the plc and may in the future use switches on the front panel to control the inputs of the plc. How do I do the communication? I have setup the applicam card and have comms with the plc I think. I am trying to use data socket to communicate to the plc via the applicom card. Any suggestions?
    Thanks
    Tom

    There�s a fair bit of documentation on NI�s site regarding the Applicom card.
    The following doc does a pretty good job summarizing Applicom's PCCONF and PCINIT, and the use of ReadWait and WriteWait to ensure you�ve got communication with the between the PLC and the Applicom card:
    http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/5913e03f551de3f786256a32005b4586?OpenDocument
    Since it doesn�t sound like you�re using the LV DSC module, you can stop reading once it gets into connecting to Lookout Objects.
    Once you�re sure you�ve got comm, you can do some quick tests in LabVIEW using front panel datasocket connections as shown on page 11-12 of the following:
    http://www.ni.com/pdf/manuals/323241a.pdf
    From there, it all depends on
    the complexity of your system. If simple, you could just stay with front panel connections, or you could move to programming with the Datasocket Read and Write functions.
    ... and if you get to the point that Datasocket is too slow and cumbersome, you might want to look at the LV DSC module:
    http://ni.com/labview/labviewdsc/what_is.htm?node=10418
    =====================================================
    Fading out. " ... J. Arthur Rank on gong."

  • If I sell my ipad can I use the SIM card with the new Macbook Pro

    Hi, I'm looking at two scenarios I need help with. I still have a contract for another 12 months with EE which gives me 2gb of data monthly on my ipad mini. If I sell the ipad mini can I use the micro SIM card in a......
    A) a new iPod Air
    Or
    B) a new MacBook Pro with Retina.

    Scraggy78 wrote:
    Hi, I'm looking at two scenarios I need help with. I still have a contract for another 12 months with EE which gives me 2gb of data monthly on my ipad mini. If I sell the ipad mini can I use the micro SIM card in a......
    A) a new iPod Air
    Or
    B) a new MacBook Pro with Retina.
    After researching this topic, I found the placing an old SIM card in a new iPad would be impossible. There is no way for consumers to remove the back cover... Without dropping it off a building. My best suggestion: Use the current plan up first. Then buy a new plan.

  • Can you use any email account with iChat?

    It appears that iChat allows you to add other other email accounts other than AOL or MobileMe but can you chat using these accounts and can you screen share etc with non MobileMe users?
    Message was edited by: Peter O'Toole

    Hi,
    The answer is yes but your question is wrong.
    The AIM page for Registration now allows you to use any Email ID as a Screen Name.
    AIM has long done this for the Apple IDs of [email protected] and the MobileMe type email IDs of [email protected]
    They have also done it for other ISPs in the past as well
    More recently I have had someone test with me having used a Hotmail ID in the AIM Registration process.
    Jabber IDs look like email IDs and in the case of the GoogleTalk option they can be.
    As long as the Screen Name works in one of your Buddy lists it will be valid And if they are an iChat user with iChat 4 or above then they will be able to Screen Share.
    NOTES:
    Screen Sharing in iChat uses a Random port so any router or modem that routes need to be able to use UPnP or Port Mapping Protocol to open the ports or it will not work.
    9:13 PM Monday; March 8, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • HT3702 can you use a debit card with itunes?

    hi, i am wanting to use a debit card from hdfc to make purchase on itunes. when i was living in the usa, making purchases with the debit card went smoothly but here in india despite it being an 'international' card it doesnt seem to go through and is rejected. my card works for many other sites including flipkart and amazon. not sure why apple doesnt accept debit cards

    As far as I know debit cards are no longer accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined. Do you have a credit card that you could use instead ? They are generally considered safer when used on sites where the card details are stored. The card also needs to have been issued by a bank in your country and be registered to exactly the same name and address as you have on your iTunes account.

  • HT201407 Can I use any sim card

    I have an iphone 3 GS and want to change my network carrier.
    When I purchased the phone it was open to all networks.
    I'm currently on O2 but want to change to Orange but my phone doesnt recognise the new sim card.
    Teresa......

    Yes. Certain models of the iPhone work best in certain countries, but as long as you purchase a factory unlocked phone, you can use it with any carrier that has SIM cards.
    This article has a list of supported carriers for the iPhone. If you use the iPhone with an unsupported carrier, you will probably find that it does not work well and/or that some features don't work as expected.
    Also, factory unlocked phones are sold only through Apple stores. They are not available anywhere else.
    Additionally, the warranty for the phone is valid only in the country of purchase. It is not international.
    ~Lyssa

  • If I buy a factory unlocked phone can I use any SIM card worldwide?

    If I buy a factory unlocked iPhone can it be used worldwide with any sim?

    Yes. Certain models of the iPhone work best in certain countries, but as long as you purchase a factory unlocked phone, you can use it with any carrier that has SIM cards.
    This article has a list of supported carriers for the iPhone. If you use the iPhone with an unsupported carrier, you will probably find that it does not work well and/or that some features don't work as expected.
    Also, factory unlocked phones are sold only through Apple stores. They are not available anywhere else.
    Additionally, the warranty for the phone is valid only in the country of purchase. It is not international.
    ~Lyssa

Maybe you are looking for

  • Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D?

    Why can I not open raw images in bridge after down loading raw plug-in for my new Canon 70D dozens of times?  I have never had any where near this amout of trouble with all my other Canon digital cameras.  <Removed by Moderator>

  • How to know the name of a message catalog

    Hi , is it possible to know the name of a message catalog at runtime (ie: 'myappli.cat' in place of qqlo_MessageCatalog) ???? thanks. Cordialement. Patrice Bourdon Alliance Sante France Tel : (33) 02.54.60.26.27 Fax : (33) 02.54.60.25.00 e-mail: mail

  • Unknown Device (code 43)

    Hello, In the Device Manager, the following error is reported for the device "Unkown Device": "This device has been stopped because it has reported problems. (Code 43)" In the device manager is faulty unit under "Universal Serial Bus controllers" and

  • Unable to find Camera raw  plug-in in new Elements 8 on a Mac

    I have a Mac Snow Leopard and a Nikon D700 camera In checking which version of camera raw is in my newly purchased {Photoshop Elements 8) I checked the plug-in folder.  Just in case I also checked Photoshop Elements 8 Pre-set and filter folders No ca

  • Tables for Fiels Fixed Value and Variable Value

    Hi, Can any one tell me where the actual fixed and variable costs are stored in which table and also the planned costs. I have checked it, but it is showing RKPLN as data structure. We are doing development report where in standard Cost Center Report