Can I use apogee one with iMovie when recording videos?

I'm currently making some videos of myself playing guitar peices and want to use my apogee one as the microphone, rather than the built in input. I seem to be able to use it as the main mike for everything but recording video!
Thanks

I am not familiar with the Apogee One, but if it connects via USB, it will probably work with iMovie. If it connects via the audio jack input, your best bet is to use GarageBand to record it, and then sync the sound to your movie later.

Similar Messages

Can i use fitbit one with an iPad

Can I use FitBit One with my Ipad?

According to the website, It appears you can sync wirelessly to mobile devices like the iPad.
I would read the user guide for it to learn how to do it.
https://desk-customers.s3.amazonaws.com/fitbit/Fitbit%20One%20Product%20Manual%2 0-%20English.pdf
fitbit wrote:
Syncing to an iOS device
Your One can sync directly to supported iOS devices via Bluetooth 4.0. To see if your
iOS device is compatible with your Fitbit One, go to http://www.fitbit.com/devices.
Also iOS is a proper Operating System. Its just different to that of a computer.

Using Apogee One with Logic Pro X- Setup Help

Hello
Using-OSX Mavericks, Logic Pro X
I have a lot of experience with GBand, but I am new to Logic all together. When I plug in the Apogee One to use for recording guitar, I hear the clean guitar tone coming through the output. The only issue is I cannot tweak the tones at all using Logic's built in amps (or Amplitube). All I have is the basic, clean tone that the One provides upon connecting. I just want to use the One as a guitar interface, and I am sure I am just missing a basic setting that will allow me to change the tone using the program's built in amps. I have also tried changing the knob on the One unit itself (guitar, mic, etc) Any suggestions?

A suggestion.. Yes, the Logic manual
1. Make sure you have "Logics Audio Preferences" set up. (see link)
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5
Next, you want Software Monitoring on.
And Using the software control panel that came with the Apogee you need to make sure that "direct monitoring" through the interface is disabled. Direct Monitoring let's you hear what the audio interface is hearing, basically, your straight/clean guitar.
Software monitoring let's the signal be run through Logic but the Interface has to be chosen as the input. (see link)
Apogee may have another name for direct monitoring, some call it "low latency monitoring".

My galaxy s5 has a blank screen. How do I transfer content to the replacement phone if I can't use the one with the blank screen?

The screen on my Galaxy S5 suddenly went blank. I can still hear when I have a message and a call, but the screen will not turn on. I am getting a replacement phone today, but how do I transfer content when I can't see anything on my old phone, so I can't use it to go into the different settings?

I know its frustrating to have a blank screen on your phone JackiDawn. I'm happy you are receiving a replacement soon. Have you downloaded your data to the Cloud? Here is some information about the Cloud http://www.verizonwireless.com/wcms/consumer/products/verizon-cloud.html?intcmp=SearchBanner:cloud:Top .
Kinquana_VZW
Follow us on Twitter @vzwsupport

Can I use events imported with iMovie 11 and on exhard drive, in iMovie 6?

I would like to open DV files in iMovie6 which are stored on external hard drive (imported with iMovie 11). How do I do this please? Would there be any loss of quality even if I knew how to do this? I asked this question previously but I was a bit more 'confused' then.

Dear Tom, Thank you, thank you - it's so easy when you know how! I had previously dragged the folder over and it didn't come cleanly. Gosh. ' File' then 'Import '- it's magic really. Ta again.

Can't use eye one with OS 10.9

I have just purchased a new mac mini. I have updated the HP software but I cannot get it to use the eye-one. It prompts me to use the apple colour balance without the dongle on the screen.
Anyone?
This question was solved.
View Solution.

Hi leicaflexsl2,
It took me as long as it did because the HP Eye-One is a commercial product. I suspect your question would be better answered in the HP Enterprise Business Community.
Although my technical expertise is with consumer products and software I did manage to find some information.
HP LF Printing Knowledge Center - Monitor Calibration
HP Advanced Profiling Solution
Personally my best suggestion would be to check for an Apple software update.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

After downloading OSX 10.8.5 I can´t use the camera with Skype.

After installing OSX 10.8.5 I can´t use the camera with Skype. Incoming video works just fine. Problem is my camera doesn´t turn on automaticly and all camera text in Skype menus are greyed out. Camera still works with facetime and photoboth and so on, so no problem with the actual camera.
Please help, Im in Kabul Afghanistan, I have my support in Sweden!
Best regards

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.

I used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this?

i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

If I back up iMovie projects to an external drive does it take the media with it? I want to free up space and remove pictures that were in iPhoto...that were used as media by iMovie when project was under way. In short I want archive iMovie stuff

If I back up iMovie projects to an external drive does imovie take the media with it? I want to free up space and remove pictures that were in iPhoto...that were used as media by iMovie when project was under way. In short I want archive iMovie stuff. If I pull pics out of iPhoto, and later want to drag an archived projet bac into iMovie and the pics are no longer in iPhoto, will I be able to keep working in the project in iMovie?

Very likely not, as the iPhoto's can be used for something else.
More like it took a copy, or it's referencing that spot on the drive in the editable files and most likely made a copy to create a new permanent export file.
Sample one picture and a iMovie file and see what happens.

I am unable to get sound using apogee jam with my guitar. I can see input levels but no sound. What step am I missing?

I am unable to get any sound using apogee jam with my guitar in logic pro 9. I am using Macbook pro.

status...
DWdrummerBeam
Jun 4, 2012 3:24 PM
I think I have done something wrong. I used my Apogee Jam on a guitar project with several audio tracks in Logic Pro 9. And while the Apogee Jam still was connected, I switched to another project with only instrument tracks (synths). I forgot to change the "Built In Input". After I did this, my guitar sounds like crap when I try to use Apogee Jam in the same guitar project, or also if I create a new project. I use Guitar Rig 5 (Native Instruments) as my guitar plug-in. But the guitar sounds strange even if I don´t assign Guitar Rig.
Can somebody help me?

Can I use apogee jam on ipad 4 with lightning 30 pin adapter?

Can I use apogee jam on ipad 4 with lightning 30 pin adapter?

OKAY Mikivai73, here's what I found: no less than TWO cheap alternative-brand imitation connectors that go 30-pin to lightning, failed to even make apogee jam device light up blue.
Spent hours mucking with it. Finally tried proper genuine apple usb to lightning connector with the OTHER cable that comes in the apogee JAM box, and it worked straight off!
So, I am buying a genuine pukka APPLE 30-pin to lightning adaptor in the full expectation it will work, and have left questions for the Ebay guys who sold the two cheap (less than 5 pounds sterling) alternate adaptors.
For info, I got the Ipad 4,and the cheap adapters, one looks like the real apple one, right down to packaging, the other is a stumpy little thing, no cable just a plastic connector, with 30 pin one side, lightning other side.
That's it, I am ordering from the apple store now, can't be more certain than that.
best regards from sleekitwan.

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

When trying to burn a playlist to a blank CD, iTunes 10.3.1 won't recognize the blank CD I've inserted (Verbatim CD-R). I've burned using these CDs before, this is a recent problem. Not the burner, as I can burn using Toast. iMac with Snow Leopard 10.6.8

What kind of CD are you burning (Audio or MP3)?
If you're burning an MP3 CD, the songs must already
be in mp3 format.
If not, iTunes will tell you that you have no songs
in the playlist.
M
I was making an audio cd. But I have since found out what the problem was. The files in my PLAYLIST I converted to aiff, since they were SDll files (I thought they were similar to AIFF, and they PLAY on Itunes...just won't burn.) When I selected the songs in the playlist and converted them...I thought all those files were converted, They were not. The converted files went into my LIBRARY, even tho I selected the ones in the playlist...and once I exchanged the SDll versions of the songs in my playlist. THEN they burned fine...but still...it's confusing..you say convert..it says it's been converted..and what they don't say is it's not been converted inside the playlist...where I had selected the songs...It just ADDED aiff versions..but only in the library...Anyway, that's what happened. But it's strange that it PLAYS SDll but won't burn them....and you'd think, logically..the ones you selected would change...but they don't. Playlists are mainly pointers to the actual files I guess...a sort of Alias..
At least it works now. But it's sad that the latest itunes does more, but also does LESS...as I used to be able to burn SDll files. Now I'll have to convert all my files to AIFF, and mp3's as I assume my ipod video won't play anything but mp3's?

How can i use my iphone with more than one itunes

how can i use my iphone with more than one itunes

Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
tt2

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

Can I use apogee one with iMovie when recording videos?

Similar Messages

Maybe you are looking for