Can I use ARD3 to send print job to client's printer?

I like the sound of ARD3 for everything else, but before I buy it, I need one specific feature - when I am controlling the client's computer, can I send a print job to the client's printer?
Thanks a bunch!

When you're controlling a computer you can do everything you would be able to do if you were sitting at the chair in front of the computer.

Similar Messages

Can i use an old eprint email account with a new printer?

can i use an old eprint email account with a new printer?

Hello arbazu,
Unfortunately, when setting up a new/replacement printer, you wont be able to use the same email address, nor can it be transferred to another printer. Once an email is used, the email address itself is not able to be used for a certain period of time (which I believe is 6 months).
However, by creating a new email address, but adding an 01 or 02 at the end, you can get something very similar to what you had previously.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100 format) out the serial port of my computer?

I am trying to write a vi that interfaces with a piece of OEM equipment that is set up to talk with a VT 100 terminal. I can't seem to locate the ASCII equivalent string (if there is such a thing) of a CTRL D. Is there a vi that emulates VT 100 commands?

If I recall, CTRL-D is EOF on most ASCII tables.
You'd probably have to use an escape sequence
or if you can use an unsigned 8-bit that might be
easier.
In article <[email protected]>, TLS
wrote:
> How can I use LabVIEW to send the equivalent of a CTRL D (in VT 100
> format) out the serial port of my computer?
>
> I am trying to write a vi that interfaces with a piece of OEM
> equipment that is set up to talk with a VT 100 terminal. I can't seem
> to locate the ASCII equivalent string (if there is such a thing) of a
> CTRL D. Is there a vi that emulates VT 100 commands?

Workflow API which can be used to avoid sending notification to user

Hi Folks,
We want Workflow API which can be used to avoid sending notification to user for particular type of error.
Say we are using following API which are used to send notification to mailbox as soon as program run into error.
wf_core.context(c_v_package_name
,c_v_func_name2
,p_event.getEventName()
,c_v_task_id_prompt||l_n_task_id
,l_v_msg_data);
wf_event.seterrorinfo(p_event, c_v_result_error);
Now we want to restrict certain type of error to send as a notification however we want to keep this record in wf_notifications table for further investigation.
Thanks and Regards,
Javed Khan

Matt,
It looks like another person had a similar question before, see the following thread:
https://supportforums.cisco.com/discussion/9697836/can-use-axl-or-other-api-get-calls-progress
Also, according to the comments seen on that post, I was able to find the JTAPI developers guide, see more information below:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/8_6_1/jtapidevguide/overview.html
If this still does not satisfy your question then, the best you can do is post this inquiry on the Cisco Developer Network on the following link:
https://developer.cisco.com/site/devnet/home/index.gsp
Hope this information helps,
Marco Rojas.

Can I use a 10 ft USB extension for my HP printer?

Can I use a 10 ft USB extension for my HP printer?

USB 1.1/2.0 specifies a maximum cable length of 5 meters (~16 feet) - http://photo.stackexchange.com/questions/8679/whats-the-maximum-length-of-usb-ca ble-that-you-can-use-for-tethering

Can we use ALE to send purchase requisition between two systems?

Dear Gurus,
Can we use ALE to send Purchase Requisition between two R/3 systems?
Source system is A. Target system is B. Target system B is the customer of A.
When A wants Material, it will check the availability.
If available, it will create Reservation.
If not available, it will create PR and send it to Target system B. Since B is a customer of A, B will, in turn, create PO and send it to its Vendors.
We plan to use ALE/IDoc. I tried to find out the message type for PR. But it's not available.
Can anyone suggest me how to do that?
Thanks & Regards,
Neeraj K.

Hello,
The technical answer is yes. You could use the message PREQCR / PREQCR01 or PREQCR02 for your requirement of transferring Purchase Request via ALE. Since I am not a process expert, it would not be possible for me to comment on your process needs.
Please let me know if you have further technical queries.
Hope this helps,
Best Regards, Murugesh AS

Can i use my new I pad with the Canon MX870 printer?

Can I use a I PAD 2 with me Canon MX870 Printer?

The Canon MX870 is not on Apple's AirPrint list of supported printers:
AirPrint basics
So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

HT203106 Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?

Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?

Yes.
Use AirDrop to wirelessly share content - Apple Support

Print Job visibility on shared print queues

Hello all,
Quick scenario, where print server has a print queue shared with several clients. Each user is sending jobs using this shared queue. Is it possible that users only see their print jobs when opening the print queue, instead of all jobs, from other users,
being sent to that print queue.
I am aware that you can mask the job title and job owner, from the driver prespective. Nevertheless I am wondering if there is something from a service or policy prespective that can be applied globally to all printer, independely of the print driver in
use.
Thanks

Yes. The client will not matter. The driver version or Type will not matter.
The documentation is extremely limited. Most of the 2012 What's new in..... was overwritten with the What's new in 2012R2.
But what the heck. I always go the extra mile for people wishing to deploy print servers. There has been a patch release where you can add the true document name in the print event logged. There are ways to determine the queue view
true document name but code would need to be written and compiled.
https://technet.microsoft.com/en-us/library/jj134163.aspx
When printing to a Windows Server 2012 print queue, only users with administrator permissions on the print queue (full system administrator or delegated print administrator, see
Assign Delegated Print Administrator and Printer Permission Settings in Windows Server 2012) will see readable document names when viewing the print queue. Users can still view the
queue from their client computer and will see their own document name in full, but for other user’s print jobs they will see
Print Document for the document name.
Additionally, in most cases in the event log on the server, the document name will also appear as
Print Document. However, in some job failure cases, the document name will be listed in the failure event.
Alan Morris formerly with Windows Printing Team

How to print report on client default printer ?

I develop web application. I use jdev 10.1.3.4.0 . I can print report in PDF format.
My Problem
I can't print report on client default printer. when Client run application and print. Report is printed at server default printer
How can I do.
_My source code for print to PDF format._
FacesContext context = FacesContext.getCurrentInstance();
response = (HttpServletResponse)context.getExternalContext().getResponse();
String urlSchema = "jdbc:oracle:thin:@localhost:1521:ORCL";
String schemaName = "hr";
String schemaPass = "hr;
reportPath = "D:\\Project\\Reports";
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection(urlSchema, schemaName, schemaPass);
reportPath = reportPath.endsWith("\\") ? reportPath : (reportPath + "\\");
input = new File(reportPath + reportName + ".jasper");
reportParameters.put("SUBREPORT_DIR", reportPath);
reportParameters.put("P_IMAGE_PATH", reportPath);
jasperPrint = JasperFillManager.fillReport(input.getPath(), reportParameters, conn);
response.setContentType("application/pdf");
response.addHeader("Content-Disposition", "attachment;filename=" + reportNameOutput + ".pdf");
OutputStream outputStream = response.getOutputStream();
JasperExportManager.exportReportToPdfStream(jasperPrint, outputStream);
outputStream.flush();
outputStream.close();
conn.close();{code}
_My source code for print to *printer*._
{code}FacesContext context = FacesContext.getCurrentInstance();
response = (HttpServletResponse)context.getExternalContext().getResponse();
String urlSchema = "jdbc:oracle:thin:@localhost:1521:ORCL";
String schemaName = "hr";
String schemaPass = "hr;
reportPath = "D:\\Project\\Reports";
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection(urlSchema, schemaName, schemaPass);
reportPath = reportPath.endsWith("\\") ? reportPath : (reportPath + "\\");
input = new File(reportPath + reportName + ".jasper");
reportParameters.put("SUBREPORT_DIR", reportPath);
reportParameters.put("P_IMAGE_PATH", reportPath);
jasperPrint = JasperFillManager.fillReport(input.getPath(), reportParameters, conn);
JasperPrintManager.printReport(jasperPrint, false);
conn.close();Edited by: jaae251 on Jun 18, 2009 2:29 AM

If you offer a PDF to the end user, they usually know what to do with it. OTOH, if you wish to provide software to facilitate the local printing, you might launch an application on the client side that accesses the JNLP API's PrintService - that can be done in a sandboxed application.
A signed application might access the normal J2SE based print services. Though I heard that Sun had decided to make printing a 'prompt on first attempt' deal - even for sandboxed apps., from 1.5 plus (or was it 1.6 plus?).
It would be a serious security bug if a web site could print on the client printer, without trust or active involvement from the end user.

Can I use iPad to send photos out to be printed? Is there an app like iPhoto to do this?

Can I use iPad 2 to send pictures out tobe printed?

You can do it with an app like Walgreen's for iPad.
https://itunes.apple.com/us/app/walgreens-for-ipad/id430444027?mt=8

Using ePrint on Mac w/Mountain Lion - print jobs line up, nothing prints, system says all is fine.

Installed Mountain Lion and first day eprinting was fine. Following day nothing would print. All print jobs say received and pending. WiFi works, test wifi print works, machine functions are correct just can't get anything to print. Very frustrated.

Hi there;
I hope you are doing well and sorry to learn that you are having this issue
It looks like the printer is not getting a connection to the ePrint server. That is most probebly why the print jobs are not printing. Bear in mind that if you disable web services your current email will be locked for 6 months no way around that, you can if you want customize your email to one close to the one you currently have by adding a 1 (number) or another Letter to the old one.
1. You will need to disabled web services.
Web Services must beenabled on your HP product in order to use the ePrint service. If Web Services is disabled, ePrint will not work.
From the product control panel, press the ePrint button ( ). The Web Services Settings menu displays.
Press the button ( ) next to the Down Arrow ( ) to select Turn ePrint off and restart the printer and them turn the printer On , and then press the button ( ) next to OK . An information page prints.
2. Now re-enable web services.
3. You can print out the printers email address.
4. Follow these steps to register at ePrintCenter.
Go to ePrintCenter , and then click Sign In . The Sign In to ePrintCenter window opens.
In the Sign In to ePrintCenter window, click Create an account . The Create an HP Web Services account window opens.
Enter your information in the text fields, and then click Create Account . The Add a Printer to your Account window opens.
In the Enter Printer Code text box, type the printer code found on the information page that you printed in the previous step.
6. Enter the printer code that printed out on the sheet of paper.
7. The printer should now show up as Connected and Ready in your account.
Let me know if you still having this issue after this troublesooting I will do my best to help you.
Hope this helps!
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

Random print jobs showing up in print queue when printing...

Whenever I print something, one or two other random files will show up in the print queue. The printer will not try and print these additional jobs, and it does not prevent another print job from printing, but each time more random files will show up. The print queue will fill up with these additional jobs until they are manually deleted. What a pain. Does anyone have a solution???

These random files can be communication files and are used to interogate the printer about its status. Typically they will be processed by the printer and then vanish from the print queue. So if they are not being processed and you are having to manually remove them then there could be a setting in the printer that needs to be changed or you have to check from an updated driver.
To confirm if it is the printer queue / driver that is checking the status, you can open System Information (Applications > Utilities) and select Printers in the left column. You can then select the printer in the top right pane and see its information in the bottom right pane (or if this is the only printer you have the information will appear in the right pane). You will see an entry called Printer Commands. If it shows something like Report Levels then this confirms that these files you are seeing are for checking the printer status.

'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing

Hello,
a few days ago, I installed the Laserjet 1022n Windows Update on my Windows 7 64 bits and since then, I can't print a page normally: the page doesn't stop printing. I am using a network port with TCP/IP.
I made several trials to solve this problem:
- uninstall the printer driver and installing it again (I tried the last version on the HP site and an older one that worked perfectly before)
- update the firmware of the printer to the last version on the HP site.
When I pause the printer and start the print job, you see it arriving in the list. Resuming the printer, the print starts on the printer but you see that the job stays in the list, flashing again and again. The printer keeps printing the same page.
I don't know what I can do to solve this problem. There is no mean of uninstalling the HP Laserjet 1022n software update because it doesn't appear in the list of installed programs (well on the list of the done updates by the way op windows updates).
I have the same problem printing on the same printer from another Windows 7 PC (with the same windows update done)
But I have no problem printing with my laptop on another network printers.
Is there someone having the same problem and how to solve it ?
Thanks for answering
This question was solved.
View Solution.

I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

Can I use ARD3 to send print job to client's printer?

Similar Messages

Maybe you are looking for