Can I use Azure Backup and Windows Server Backup in a Windows Server ?

Can I use Azure Backup and Windows Server Backup in a Windows Server ?
I want to use both Azure Backup and Windows Server Backup for two senarios.
For Disaster Recovery = Azure Backup to Azure Storage.
For non-Disacter Recovery = Windows Server Backup to a on-premises disk.
The non-Disaster Recovery mean a file or folder recovery, disk crash recovery, migrate to another servers.
The non-Disaster Recovery need the speed of recovery just like 10 TB recovery as soon as possible.
If I can use both Azure Backup and Windows Server Backup in a Windows Server,
Are there any notes for using both ?
Regards,
Yoshihiro Kawabata

Hi Yoshihiro Kawabata,
Thanks for posting here!
Azure Backup to Azure Storage and Windows Server Backup to a on-premises disk. These are two different question and can be answered individually.
Azure Backup to Azure Storage - Possible.
Windows Server Backup to a on-premises disk - Possible.
Can I use Azure Backup and Windows Server Backup in a Windows Server? Is a question.
I will check on this and get back to you at the earliest.
Thanks!
Sadiqh

Similar Messages

My Wi-Fi connection failed while I was updating to IOS6.1... I can't use my phone and itunes indicate "the iphone software update server could not be contacted"... HELP!

I am now reconnected throught wi-fi... and I cannot seem to continue my upate... my iphone cannot be used as it indicates to connect to itunes... and itunes does not recognize my iphone!!!

Try:
- Powering off and then back on your router.
- The Additional Information paragraph of
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Can I use the Disk Utility Application to backup bootcamp windows 7?

Can I use the Disk Utility Application to backup Bootcamp that has Windows 7 on it? If I install a new blank drive, I would like to know that using Time Machine I can get the MAC OS back and using the Disk Image Utility I can restore Bootcamp with Windows 7.

NO.
You have to use Windows or a Windows utility.
There are programs that will clone an entire drive (sector) as well.
DU does not though. Paragon does support Boot Camp.

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

Can I use my Time Capsule as a backup disk and storage?

Can I use my Time Capsule as a backup disk and put files from my other USB external hard drive on it, using the TC as an external as well?

Actually, there is a way to limit the amount of space Time Machine uses for backup so that it won't eat up all your disk space...for example, I have mine set to only use 65GB, and then it starts to overwrite older backups...Google it for more info. To begin with, I deleted my Sparse Disk Image Bundle from Time Capsule, and used Disk Utility to create a Sparse Disk Image Bundle (turn off backups first!!!) with a capacity of 65GB in HFS Journaled, Case Sensitive...The Image must be named as follows "Full Computer Name_Ethernet MAC Address" (The ethernet MAC address is used even if you plan to solely use wifi for backups). for example, my Sparse Disk Image Bundle name is "Ahmad Atiya's MacBook Pro_00254b9d8f72.sparsebundle" Move this image to your time capsule's main directory (if you didn't create it there to begin with). Go to your Time Machine preferences, turn it on, and set it to use your Time Capsule. It should start using the image you created. If you click "get info" on the disk image, it'll show a capacity of whatever you created.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Just bought Time Capsule and do not intend to use as a router. Can I use it just as a wireless backup to my Mac?

Hi all - Just bought Time Capsule and do not intend to use as a router given that my Uverse router works splendidly. Can I use it just as a wireless backup to my Mac? Sorry if this is a boneheaded question, but this is my first time backing up my machine ( I know, foolish). Thanks!

Your problem will be if you use wireless for internet then you cannot do both internet and backup at once.. you still should plug the TC into the uverse router and set it in bridge mode.. you can setup wireless if you like on the TC and use either TC or uverse but you must work out how to do both at once.
If you use ethernet on the Mac then wireless to backup is also a bit of an issue.. please ask as I can show you the setup.. or visa versa.. wireless for internet and ethernet for backup..

Backup and restore on solution manager in Windows

Dear Team,
I have one windows 2003 server in this 3 Harddisk Drive C , D , & E . In this solution manager and saprouter is installed.
Now I want to move all these installation and data in other system.So that these same think Proper run in other system.l
How I take the backup of old system and Restore in other new system.
Because in this BRTOOLS not running.
Whats is the process of take the backup and restore of solution manager in windows environment.
pooja

Hi,
Solution Manager is dual stack system (ABAP+JAVA). Please refer this useful system Copy guide [How to System Copy ABAP and JAVA|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000?quicklink=index&overridelayout=true] to get more detailed information.
You can use Database Independent or Database Specific method to perform such System Copy.
You can refer this useful document [Homogeneous-System-Copy-using-OnlineandOffline-ORACLE Backup|http://www.basisconsultant.com/component/remository/Sytem-Copy-Guides/Homogeneous-System-Copy-using-OnlineandOffline-Backup/] to get step by step details. In Database specific method you will have to create JAVA export also in ABAP+JAVA stacks system.
Regards,
Bhavik G. Shroff

Can i use my mac and pc with a cloud app?

can i use my mac and pc with a cloud app

Yes.
http://www.adobe.com/products/creativecloud/faq.html
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
An ever-expanding membership that provides access to Adobe's latest products, services, features, and workflows as soon as they are available. You no longer have to wait 12, 18, or 24 months for the latest innovations.
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information.

Can I use boot camp or other virtualization software with Snow Leopard Server?

Can I use boot camp or other virtualization software with Snow Leopard Server?

Boot Camp is not virtualization; it boots Windows natively on the Mac hardware. So Boot Camp would be irrelevant to running Snow Leopard Server. Parallels and VMWare Fusion both have at least "experimental" support for running Snow Leopard Server in a virtual machine on Mac OS X, though I don't know how robust it is as of this time. You might ask for opinions on the Parallels or VMWare forums.
Regards.

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details.

How can i use this sript and loade another movie?

Hi there, i used the following script to load a movie from the server;
var request:URLRequest = new URLRequest("url string");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
How can i use this sript and loade another movie? Can someone help me please?
[edited by moderator]

Sir, I changed it from:
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Dir.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
to
var request:URLRequest = new URLRequest("http://agusandelsur.gov.ph/downloads/pdrrmo/agusan_del_sur/StaJosefa/Movies/Warning.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);
When i expord the movie i get the following error.....
Scene 1, Layer 'Layer 3', Frame 1, Line 6 1151: A conflict exists with definition request in namespace internal.

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

Can I use Azure Backup and Windows Server Backup in a Windows Server ?

Similar Messages

Maybe you are looking for