Can I use bluetooth speakers with my IMac

I want some wireless speakers to use outdoors.  If I get bluetooth speakers and pair them with my iMac (MountainLion) will I be able to listen to iTunes output.

You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

Similar Messages

  • Want to use bluetooth speakers with volume control, don't want the iPad internal speaker sound, is this possible?

    want to use bluetooth speakers with volume control, don't want the sound at the iPad internal speakers, only on the external speakers.  is the possible? and how

    You can't downgrade the iOS.
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • Can I use another monitor with my iMac desk top?

    Can I use another monitor with my iMac desk top? Our monitor screen is going out and would like to have another option then replacing the whole thing! I think A LCD TV would be less expensive than the repairs to our iMac.( OS 10.6.8 )

    Yes, but we need to know exactly which year model you have? So that we can advise you on exactly which adapter you need for you iMac.
    see > How to identify iMac models
    Plus, adding that Computer Monitors make better displays than TVs and comparatively cost a little less than TVs.
    For examples of monitors that have both DVI and VGA inputs:
    see > LG 21.5" Widescreen FlatPanel LED HD Monitor E2242T - Best Buy
    or > HP 20" Widescreen FlatPanel LED Monitor W2071D - Best Buy

  • Can I use Bluetooth earphones with my Macbook Pro?

    Can I use Bluetooth earphones with my Macbook Pro?
    If so, are there any problems and/or limitations in doing so? (i.e. no stereo sound, or anything else?).

    Can you use Bluetooth earphones simultaneously with the Magic Mouse (which is also Bluetooth)?
    And, just out of curiosity, why can't you use the Bluetooth earphones on an airplane?

  • Can I use bluetooth speakers and wired speakers together

    Can I use bluetooth speakers and wired speakers together?

    You should be able to listen to your music in iTunes through the Bluetooth speakers. If, after buying the speakers, you can't select them in iTunes, just go to System Preferences > Sound > Output, and choose the Bluetooth speakers

  • Can I use Bluetooth headphones with a 1st generation iPhone?

    Can I use Bluetooth headphones with a 1st generation iPhone? The headphones pair but the sound comes out of the phone and not the headphones. The phone has iOS 3.1 which is the last software the phone will support. Thanks.

    This will help you:
    Original iPhone
    The original iPhone features Bluetooth capabilities only for making calls. Connecting to a PC or streaming audio other than phones calls through Bluetooth is not supported.
    IPhone 3G
    With the iPhone 3G operating system, its Bluetooth capabilities are expanded to support wireless stereo headsets, file sharing with other Bluetooth devices, and use of the iPhone as a 3G modem. Also supported are new capabilities for combining the iPhone with Bluetooth accessories.
    IPhone 4.0
    The 4.0 version of the iPhone's operating systems keeps the expanded Bluetooth functions introduced in version 3 and adds one new benefit: Bluetooth keyboard support, so iPhone owners can use wireless keyboards wherever they go.
    Sponsored Links
    Read more : http://www.ehow.com/facts_6926213_iphone-bluetooth-capability_.html

  • Can I use external speakers with the iPad when using Facetime?

    Can I use external speakers with the iPad when using Facetime?  How do I do that?

    They have to be either plugged in via headphone jack or the dock port at the bottom. If you can. I've used it on apple tv, but that's it. I don't know if the others work, but I don't see why not. Try plugging in speakers in the headphone jack. You will get an answer :)

  • Can I use face time with my iMac?

    Can I use Face Time on my iMac?
    I have a 17" core duo.
    It seems to be having difficulty downloading.

    Facetime requires at least OSX 10.6.6 Snow Leopard
    http://www.apple.com/support/mac/facetime/getstarted/
    With OSX 10.7 Lion Facetime is part os the OSX.
    Facetime should work well with what you have in mind.
    Stefan

  • Can i use bluetooth headphones with my mac

    can I get bluetooth headphones to use with my imac?

    Yes you can. Go to system preferences/bluetooth, turn on the headset. Headset will show up, then pair it.
    Dave

  • Using iGlobe speakers with newer iMac

    I am so happy with may new iMac, but I thind maybe the speakers that came with my old iGlobe 700 Mhz were better than the internal ones in the nex one. However they have some strange plug that doesn't fit with the contact for earphones. Does anybody know if there is some connector out there that I can use?

    Hello, 
    The reason it has a proprietary connector is that it was a very high powered port and it a user inadvertently connected another set of standard speakers they would almost certainly be damaged.
    I've seen Pro Speakers on ebay where someone has cut off the proprietary connector and attached a standard 3.5mm jack. This works but the speakers are then very very quiet. The only real solution is either a new pair of speakers or there was an adaptor made by Griffin called the iFire:
    http://www.welovemacs.com/ifire.html
    However it's no longer made and it's second-hand value is pretty high.
    I too was fairly disappointed with the sound of the new Aluminium iMac compared to the iMac G4 with Pro Speakers although actually I've been living with it for eight months now. I did look at the LaCie Firewire speakers because they don't need a separate power supply but haven't been sure enough to spend my money yet!
    http://www.lacie.com/products/product.htm?pid=10880
    mrtotes

  • How can i use both speakers with 2 displays

    i am using 2 27" displays with my powermac but the sound only comes out of one.  does anyone know how i can have the sound come from both display?
    also, does anyone know how i can control which camera is being accessed by iphoto.
    thanks.

    For the audio you most likely need to use Audio MIDI Setup (in your Utilities folder) and create an "Aggregate Device".  This doc might help.
    I don't have an answer for the camera question.

  • Can't use flash drive with new iMac

    We are new Mac users.  My husband downloaded a zip file of aviation charts.  He needs to transfer the zip file to a flash drive and then to a portable device so that he can use the charts when he flies.  We plugged in a flash drive, but it doesn't show up on the desktop or anywhere else.  We have looked everywhere on the system.  What are we doing wrong?  Thanks for your help!

    Make sure you have prefs set to show external storage devices on the Desktop and in the Sidebar. To set that, go to Finder's Preferences (Preferences in the Finder menu).
    On the General tab in Finder Preferences, checkmark the item "External disks" near the top.
    On the Sidebar tab in Finder Preferences, checkmark the item "External disks" under Devices.
    You may also need to format the drive before you can use it. You can use Disk Utility to do that (Applications folder > Utilities > Disk Utility).

  • Just added Lion and now can't use remote speakers with iTunes

    I recently installed the Lion OS (10.7.4) and now I cannot access my remote connection to my home stereo for iTunes. I can't find the icon to even select multiple spakers.

    I suggest optening the Print & Scan Sytem Preferences. Once the preference pane opens highlight your printer in the Printers column on the left side of the window, then click on the little minus sign below the printer in order to remove your current printer selection.
    Once your printer has been deleted, then click on the little plus sign located next to the minus sign in order to re-select your printer. Once the 'AddPrinter' window opens simply select your printer from the list. Make sure the printer is powered ON, there are no error LED's ON, and that any necessary cables are connected to your iMac. Hopefully reselecting the printer will resolve your issue.

  • Can I use Bluetooth feature on my IPad?

    CAn I use Bluetooth feature with Verizon cellular phone number?

    What exactly are you trying to do? What happens when you try?

  • Can I use aperture 3 with 2.4 ghz intel core 2 duo?

    Can I use Aperture 3 with an imac with a 2.4 ghz intel core duo processor?

    Yes. I still use a 2006 2.33 GHz C2D MBP with 3 GB RAM as a backup box, and it "works." Be aware that iMac is underpowered overall for Aperture usage, but some folks do OK with it (4 GB RAM minimum). Like DLS said, more RAM is better than less RAM. 8 GB RAM is generally appropriate, but I can even overload the 8 GB in my 2011 MBP when running an aggressive Aperture/Photoshop workflow.
    Also the stronger the GPU the better, and an SSD is far far preferable to a hard drive for boot, because any page outs go to SSD instead of to the horribly slow 2.5" laptop drive.
    HTH
    -Allen

Maybe you are looking for

  • Safari cannot open webmail server page

    Even after Yosemite update problem not fixed. Still cannot access  emails on server webmail page.

  • How can I get a refund for an app?

    I bought an app a couple of days ago, then found it doesn't do what I thought it would. How can I get a refund?

  • Setting priority on Unit Tests - is it possible?

    Is it possible to set a priority level (low, medium, high) to the units within a test package. Not on the test cases, but when the test plan is generated the option "with transaction" is selected. And we are testing the unit/transaction can you set a

  • Location of DTD or Schema for XSQL Statements

    Hi, where can I find a DTD or a XML schema for XSQL statements? I am using XML Spy as XML editor. With a XSQL DTD it would be more comfortable to create xsql files. Kind regards, Achim

  • File error - FORMAT TOO NEW

    I am very stuck at the moment. I am helping a uni student with a project in edits and this " "File's format is too new for this version of the application" message comes up but I have made sure the FCP versions were the same and they are. I have FCP