Can I use both ePrint and AirPrint on an HP4630 at the same time

I have an HP4630 printer that I wish to use with an iPad and Mac Notebook (PowerPC running OS X 10.5.8) and want to know if I can run AirPrint for iPad and ePrint for Mac Notebook at the sametime.
I understand that Mac Notebook can not connect to the printer over the network because it is not capable of running OS X 10.6 and above.
I appreciate your help.
This question was solved.
View Solution.

Hello Chesher5,
Welcome to the HP Support Forums!
Regarding the inquiry into ePrint and AirPrint for the Officejet 4630, yes they can be both used at the same time. They are completely separate means of printing. Both require a network connection though.
If you have any problems setting up or using either, please let me know and I'll do my best to assist.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

    Hi Gurus:
    Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
    Please let me know as this impacts a lot of my development....! Thanks....
    Best...... ShruMaa
    PS:  I had posted this in "BI Extractors" forum but there has been no response......  Hope to get some response.......!  Thanks

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • HT201933 How can I use my trackpad and my Apple Magic Mouse at the same time? If I don't have my mouse with me I can't use my laptop. The trackpad only moves an arrow around but doesn't let me click on anything?

    When I want to use only my laptop without the apple magic mouse, how do I disable the mouse so that the trackpad works?

    Hi, thanks for your answer,
    No, I connected the midi-in from the blofeld to midi-out from the virus. I was told to do so by the guy who sold me the ultralite mk3.
    I made some tests before getting the ultralite... I used the Virus soundcard as audio device and I could control the blofeld. But I had to link my monitor to the Blofed Out... then I wasn't able to listent to the Virus. But this way I could play the Blofeld in Logic (but couldn't see any midi data and when I bounced I had no sound)
    That's the main reason I decided to buy an external audio device (to be able to play both the Virus and the Blofeld)
    But I think the way I connected Blofeld to Virus is right because I can see the light which means it receives midi data.
    I think it's more about how to set it within logic...
    And the Blofeld only gets one Midi connection: Midi In
    Both my Virus and Blofeld are also connected to my MacPro via USB, that's the reason I didn't connect the synths to the ultralite via midi...
    thanks for you help! I'm getting crazy lol

  • Can an Ironport work in both WCCPv2 and L4 Traffic monitoring modes at the same time?

    Hello Ciscoers,
    We have an ironport installed and we use WCCPv2 to redirect the traffic. And as it occurs, I have a need to forward the traffic for another network, that uses another path to the Internet.
    So I was thinking using the L4 Traffic Monitoring.
    To the best of your knowledge, is there a way to have the appliance use both WCCPv2 and L4 Traffic monitoring at the same time? From the configuration, it's one or the other.
    Thanks,
    J.

    Ok. I'll try.
    As a matter of fact, I plan to use policy-based routing to forward all the "interesting" traffic to the appliance.
    For your TCP-Resets not seen, do you allow ingress on the span session?
    J.

  • Possible to Use Radeon 4870 AND EVGA NVIDIA GTX 285 at the Same Time?

    Hello,
    I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
    The second display maxes out at 1280 x 800 resolution.
    I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
    To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
    Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the Nvidia? Can I even install both at the same time? Or should I remove the Radeon and use just the Nvidia?
    FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
    I would appreciate any and all help on this!
    Thanks!
    Charles

    I just tried to connect a second 30 inch Cinema display to my early 2009 8-core MacPro with a Radeon 4870 card.
    Are you using the Mini DisplayPort to Dual-Link DVI Adapter?
    <http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA5OQ&mco=MjkyNjI0Mg>
    The second display maxes out at 1280 x 800 resolution.
    That's the resolution the 30" will run at with a single-link DVI connection.
    I think that is a function of the second port on the 4870, rather than a limitation of the card itself.
    It depends on the adapter you use.
    To get around this, I ordered the EVGA NVIDIA GTX 285. At $499, that's a big yikes.
    It has twice the graphics memory, so may be better if you are processing lots of large images at once.
    Here is my question: Will I get better performance running one 30 inch from the Radeon, and the second from the NVIDIA?
    No. For only two displays, one card is better because it can handle moving windows between displays, or windows spanning both displays. With the displays on different cards, the main computer has to do more work. Even if the windows are never going to cross display boundaries, there is no way for the applications to know that, so they won't let the graphics cards do as much as they could.
    Can I even install both at the same time?
    No. There are only two auxiliary power connectors, and one card will use both.
    Or should I remove the Radeon and use just the NVIDIA?
    Try each card and see which gives the best results with your applications.
    FWIW, I use this Mac for Photoshop and other image software, and for some stats work. No games. I am using CS4, which would never recognize my 4870. Maybe I will do better with the EVGA NVIDIA GTX 285?
    The extra video RAM may give better performance with lors of large images.

  • Can't connect to Internet and 192.168.1 network at the same time

    I have been having an issue with my MacBook's networking for the past 4 months. Here are the specifics:
    *My MacBook is connected to the Internet via a linux router, with an address in the 192.168.1.x address space. DNS server is an openDns server, 208.67.222.222
    *My MacBook is assigned an IP Address manually in the 192.168.1.x namespace
    *I have a printer manually assigned an address in the 192.168.1.x namespace
    Problem:
    * I can only connect to my printer if I leave my DNS server entry blank under my Airport TCP/IP configuration
    * I can only connect to the Internet when my DNS server entry to set to the openDNS server entry.
    Question:
    Is there any way I can connect to both my local network printer and the Internet at the same time? I have set up two locations that I can switch between, but I would prefer to be able to access both networks at once.

    I tried turning AppleTalk on, but no luck.
    It seems that the problem is related to basic TCP/IP connectivity. For example, when my DNS server is set to blank, I get a fine response from the command "ping 192.168.1.253". However, when my DNS is set to one of the openDNS servers, I get this error:
    PING 192.168.1.253 (192.168.1.253): 56 data bytes
    ping: sendto: No route to host
    ping: sendto: Host is down

  • Apple TV - can I pair my macbook and my wife's macbook at the same time with different itunes accounts?

    Just bought the Apple TV2 yesteday.
    I'd like to pair both my macbook and my wifes macbook to the Apple TV.  We both have seperate iTunes accounts.
    Is this possible without having to sign on or the other out of apple TV?

    Welcome to the Apple Community.
    Yes you can do that. The key to this is remembering your homesharing ID and your iTunes account ID are not the same thing (although you can use your account details for your homesharing details)
    Set up homesharing in both instances of iTunes using the same information in each, your Apple TV will then see both libraries.

  • Can I use one gift card for two apple ID at the same time?

    Can I activate one gift card for two different apple ID and use amount from gift card like bank account?

    No, an iTunes gift card can only be redeemed onto one account, and it can be used to buy content for that account (you can't, for example, redeem it on an account and then use some of it for gifting content to another account).

  • Can i use u.s and a u.k account on the same ipod?

    im using a u.s account right now , i wondered could i sign up for a uk account and somehow use that too
    im assuming uk has a differant content to the u.s?

    You can only sign up for a UK account if you are a UK resident, have a UK address and have a UK registered credit card.
    You switch between different country accounts in iTunes on your computer.

  • Can you use 1 apple id for 2 different devices at the same time

    i have the iphone 5 and recently brought the ipad with sim but i cant seem to get the new sim working on the ipad it keeps conecting to the iphone and using that number any ideas ??? thanks

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • Can I use both SID and SERVICE_NAME in my DG configuration?

    Hello,
    Need little guidance for the following senario
    I've got a shared database where more then one application connects to. To configure failover from primary to standby, I need SERVICE_NAME'ing but my applications connect using SID naming conventions to this DB
    Can I use both SID and SERVICE_NAME in DG configuration + make the applications failover to STANDBY DB as well?
    Regards,
    Kam

    You will hardly achieve a proper connect to your new Primary using SIDs after switchover.
    Stay away from using SID - connects with your applications and use application services for that instead.
    Kind regards
    Uwe Hesse
    http://uhesse.wordpress.com

  • HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

    I have Parallels installed with Windows 7.  Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

    You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

  • Can iCal use both English and French languages or does the System software need to be either French or English?

    Can iCal use both English and French languages or does the System software need to be either French or English?

    joanfromardon wrote:
    Can iCal use both English and French languages or does the System software need to be either French or English?
    The calendar language is determined by system prefs/language & text/formats.
    The app language is determined by system prefs/language & text/language, or you can probably use
    http://www.tj-hd.co.uk/en-gb/languageswitcher/

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • Can I use both cs and cc at the same time?

    Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

    Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
    Regards
    Kasper

Maybe you are looking for