Can I use both iPhoto and Aperture on the same library?

I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
Thanks much!
John

I think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
Thank you

Similar Messages

HT4818 Can you use both Bootcamp and Parallels with the same Windows 7 installed

I have Parallels installed with Windows 7. Can I use both Bootcamp and Parallels on the same machine depending on whether I just want to work in Windows all day (Bootcamp) or alternate during the same session (Parallels)?

You can, yes. But there is a complication: once you activate windows it will only be activated for one of the two methods you use. So, let's say you install into boot camp and activate windows. You can then install Parallels and it will find your boot camp installation, but when running in Parallels, Windows will report that it is not activated. Or, you can activate it in Parallels and when running in Boot Camp Windows will report that it is not activated. The reason for this is because Windows thinks it is running on different computers depending on how you boot it. This may not be an issue for you if you run Windows a lot one way and just occasionally the other way, so be sure to activate Windows in whichever method you use more often. Hope this helps!

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

Is it possible to keep both iPhoto and Aperture on the same Mac

I would like to use both IPhoto (for day by day pictures) and Aperture (for pictures made with my SLR in Raw format).
Is anybody able to advice me about this opportunity?

You can keep both Applications (iPhoto and Aperture) on the same computer and separate libraries for iPhoto and Aperture; images from both libraries will/should be available in other Applications from the Media Browser. In the long run, after you get accustomed to working Aperture, you will find it more convenient to migrate all your images to Aperture. Aperture has the more efficient storage strategy, you need less disk space to store multiple versions of the same image in Aperture than in iPhoto, and Aperture is the more versatile tool.
It is easy to migrate iPhoto libraries to Aperture, but that is a one way road, if you want to export back to iPhoto, you can export your images, but not all of your library structure.

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

On my wireless printer can i use both usb and wireless at the same time

i tried to print from coupons,com but it will not i have used coupons.com before with my other printer and weorked fine i have coupons.com looking into it
just wondering if anyone else out there have the same problem

Hi,
Same physical printer but when connecting to SAME computer using both USB and wireless it becomes two (logical) printers. Probably your default prnter is the wireless one, you have to select the right printer before print .
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I use both Lion and Leopard on the same computer?

I have installed Lion and can't recover documents created by Canvas 9, a PPC app. Can I create a partition to run Leopard, so that I can use PPC apps?

My mid-2010 iMac 27" i3 came with Snow Leopard. My internal hard drive is partitoned into 3 parts - one boot volume for Snow Leopard (10.6.7); one boot volume for Lion; another boot volume for Lion. The two Lion partitions were added to the internal drive without erasing the initial install of Snow Leopard.
I also have an external firewire drive which is partitioned into three volumes: one with a clone of the primary's Snow Leopard 10.6.7; one with Snow Leopard 10.6.8 (built on another clone of the primary); and one used for GP file storage.
That gives me three bootable volumes for Snow Leopard (two of 10.6.7, and one of 10.6.8) and two bootable volumes for Lion. All of those are, in fact bootable - they have all been tested for that by booting to them.
Booting to a different valid OS on a different volume is as easy as going to System Preferences > Startup Disk and then selecting the OS/volume one would like to use on the next restart. Then just restart.
The choice can also be made at booting - as soon as the startup chimes sound, hold down the Option key to bring up Startup Manager. In that screen select the boot volume of choice.

How can I use both endnotes and footnotes in the same document?

My project requires that the document have both kinds of notes. Thanks.

You may have to split the document into 2, one for each as they seem to be an either or option.
Peter

Using both iPhoto and Aperture workflow help

I am using both aperture 3 and iPhoto 9 to edit and keep track of images
I imported images to iPhoto the have Aperture import the iPhoto library this way I have i library..I know if something happens to it I am screwed
1) I know that Aperture is non destructive, is iPhoto?
2) will changes ( like GPS location) in aperture be applied to iPhoto images
3) looking to see if I can make changes made in one program appear in the other
4) or it it better to import the images in from my external drive (how they were before iPhoto), and have a separate library for each program

Here's the best advice for using both iPhoto and Aperture:
Pick one horse and ride it. They both do the same job. If you're shooting Raw or high volumes of Jpeg, then definitely go with Aperture. If you're doing family snaps with a point and shoot stick with iPhoto. Using both adds unnecessary complexity to everything, and with complexity comes the risk of error and data loss.
1) I know that Aperture is non destructive, is iPhoto?
Yes. In a wholly different way, mind you, but yes. WHen you edit an image in iPhoto it creates a new file called the Modified Version. You can always revert to the Original photo. If you edit only with iPhoto then you can also avoid generational loss.
2) will changes ( like GPS location) in aperture be applied to iPhoto images
No.
3) looking to see if I can make changes made in one program appear in the other
You can't.
4) or it it better to import the images in from my external drive (how they were before iPhoto), and have a separate library for each program
It makes no sense to use both programs.
Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
What are you hoping to achieve by running both?
Regards
TD

Use both iPhoto and Aperture with one library-best practice?

I'd like to use both iPhoto and Aperture, but have both programs use/update just one photo library. I have the latest versions of both programs, but was wondering if the optimum approach would be to:
a)point Aperture to the existing iPhoto library and use that as the library for both programs
or
b)import the entire iPhoto library into a new Aperture library, delete the iPhoto library, and point iPhoto to use the Aperture library.
I should point out that up to now I've been using iPhoto exclusively, and have close to 20K photos in the iPhoto library, tagged with Faces, organized into various albums, etc; if that makes a difference...
Appreciate any advice!
Thanks,
Dave

Thanks Frank! I'll try it that way.
Appreciate the help!

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column, find the 10 lowest numbers, then get the average and after that multiply it by .96 I used to use Excel and the formula worked fine in that. Here is my Formula
=(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96 So instead of using 1 cell, I'm using 12 cells to get my answer.
This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
Hoping I explain myself well enough and that someone can help me.
Thanks

You can still do it in one cell but it will be more unruly than the Excel array formula.
=average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
where you would, of course, replace the "..." with the remaining six SMALL functions.

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

Does anyone use both iPhoto and Aperture

I just got an mac book pro and I am trying to decide what to do with my iPhoto library that is on my old G4 eMac. I'm wondering if the best (and safest) plan would be to transfer that library to the new machine, bring it into iPhoto and then import the entire library into Aperture.
On second thought I wondered if it would be a good idea to leave everything in iPhoto and just open images in Aperture only when I want the extra editing tools... using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
And... is it even possible to import the library from another machine directly into Aperture?
Thanks in advance,
bd

Pick one and stick with it. They don't actually integrate very much.
Aperture and iPhoto are entirely different applications that work in very different ways.
The only communication between the two is as follows:
Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
Aperture can share its Previews with the iLife apps, including iPhoto.
That's it.
So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
So if you decide to try this:
using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
You'll end up using two apps to manage two different sets of photos, with twice the complications. Aperture is not an "external editor" and can't be used as such.
Think: Writing your novel in Word and TextEdit at the same time. "I'll write this chapter in Word, this paragraph in TE and then back to word..."
What of you wanted to sync your Photos back to your Phone? Which library will you use? You can't use both.
And... is it even possible to import the library from another machine directly into Aperture?
The routine would be to move the Library to the new machine and them process it into Aperture. Then trash the unwanted iPhoto Library.
Regards
TD

Can we install both PI and CE in the same instance ?

Hi,
I have requirement to use EAI and BPM tools in SAP, as i know the tools will be PI and CE, but then to reduce the total cost of the hardware we need to put both PI and CE into the same box. is that possible to install both application in the same instance to reduce total memory used ? because both system also using the same java stack the only different is the installed component.
Please advise ?
Thank You and Best Regards
Fernand Lesmana

Hi Fernand,
is that possible to install both application in the same instance to reduce total memory used ?
Yes, it is possible.
Please advise ?
Not advisable to have PI and CE on same instance. Might face problems as cited by Abhishek.
Regards,
Neetesh

Can I use both iPhoto and Aperture on the same library?

Similar Messages

Maybe you are looking for