Can i use both the ibook and kindle ebook apps on the same ipod?

I have the ibook ebook app on my ipod touch at the moment which i love and use a lot but one of my favourite authors has started releasing her ebooks only for kindle devices. Can i install the kindle ebook app on my ipod as well as the ibook app without the two interfering with each other?

as well as Barnes & Noble's Nook app, Sony's ereader, Kobo, and a dozen or more additional ereaders.
If reading PDFs, I like "GoodReader" as it has the ability to re-render the text to a larger font size that is earier to read on an iPod Touch.

Similar Messages

Can I use BOTH IE & FF and retain the shortcuts to both to use at will?

Can I use BOTH IE & FF and retain the shortcuts to both to use at will? I can download FF ok and use for a day or so along with IE, but after that I start to get messages from Windows saying IE is not my default browser and do I want to make it the default. If I answer no, many links in my windows mail and other links in the windows system don't work...I get a message that the file can't be found . If I answer yes, the FF shortcuts disappear and can't bring up the FF from the FF folder, I get a msg that the FF folder is corrupt!

Hi, aparently we're a problem while you installed firefox. try to uninstall and reinstall firefox again,
after you do that, open firefox and go to Tools>options>Advanced>General, and see that it have to be an option at last that sez "always check to see if firefox is the default browser on startup" uncheck that option.,
Then go to IE, go to tools>internet options>programs>and clic on "Make Default".
With this you make that IE the default browser.
Bye

Can I use both iPhoto 6 and 5 on the same Mac?

I gave up on iPhoto 6 when it comes to publishing web galleries (see my posts at http://discussions.apple.com/thread.jspa?threadID=456532&tstart=0 )
Can I use both iPhoto 6 and 5 on the same Mac?
Thanks!

Lior:
Welcome to the Apple Discussions. Yes you can but it takes a lot of caution! You can have both application running their own library. But the problem comes in when you launch V5 into the last used library, a V6 library, and it can corrupt that library so it won't open in V6 again. Conversely, if you open V6 and the V5 library was the last to be opened and you don't pay attention, you'll convert it to a V6 and lose the V5 access.
So you have to make sure you ALWAYS launch iPhoto with the Option key depressed and manually select the library to use each time. Also Name each library differently. I use V6 LIbrary and V5 Library. You can rename your current one and then launch iPhoto with the Option key depressed and navigate to it to open it.

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

TS1398 How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

What does this have to do with using an iPad?
But yes, you should be able to connect to your home WiFi network with multiple computers and devices. In my house my wife, my daughter and I will all be using the WiFi Internet connection at the same time with our Laptops and I will also be using my iPad, my daughter uses her iPhone, and we have no issues at all.
Is this what you want to know about?

Can I save both DVD-R and DVD-Video files onto the same DVD?

Can I save both DVD-R and DVD-Video files onto the same DVD?

Hi Stan,
I just want the user to be able to run my video clips either on a
computer or on a standard DVD player. It would be nice to include both
formats on a single disc. I am new to this and am not sure what format
is most widely used for standard DVD players. Thanks for your response
and any guidance you can give me.
Quinn
Quoting Stan Jones <[email protected]>:
Stan Jones http://forums.adobe.com/people/Stan+Jones created the discussion
"Re: Can I save both DVD-R and DVD-Video files onto the same DVD?"
To view the discussion, visit:
http://forums.adobe.com/message/4996961#4996961

What is the best and easiest print app for the iPad and iPhone?

What is the best and easiest print app for the iPad?

Richard-
The best and easiest is to use the iPad's built-in AirPrint system with an AirPrint-capable printer. <iOS: AirPrint 101>
If you do not have an AirPrint-capable printer, all printing Apps are a compromise. I have an HP non-AirPrint printer connected to my WiFi router. The free HP App, ePrint Home & Biz works OK with photos.
Print n Share and PrintCentral each have their own browser, mail, text and photo programs that work well with the printer, but they can only be accessed from within other programs that have the "Open In" option. (So far, I think GoodReader is the only App I have with that option.)
You can run a program like Printopia or FingerPrint on your computer that will share its printer as AirPrint over WiFi. They both are reported to work well. However your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred

How can I have both genius playlist and regular playlist on my new 160g ipod classic. The list of songs are there, but when I click playlist, I only get the genius playlists.

How can I have both genius playlists and regular playlists available on my new 160g classic ipod. I can see my entire song list, but no playlist other than the 3 genius playlist I just made. Also how can I delete a genius playlist. Made the same playlist twice by mistake. Thanks.

This was not a simple task. Got it handled. Had to call Apple support. Apparently, the 160g only syncs the genius playlist. You have to go in and "tell it" to sync the entire playlist as well as the genius playlists. There is also an option for only syscing certain songs. On itunes, there is two sections; one for the stuff that is synced on your ipod and another separate list for the stuff in your library! This is exciting for me as I am not computer savvy to say the least.

Can I use SubPanels to display and run multiple executables from the same GUI?

I have two Labview executables that performs some A/D I/O, each using an independent USB-6008. I would like to run both of these executables from a single UI. Is this possible usin SubPanels? Or some other method?
I found KB regarding exe's and VI Server but can't seem to get the suggested workarounds implemented.
http://digital.ni.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C?OpenDocument
I am using Labview2009
Thanks
Dan
Solved!
Go to Solution.

DBerry wrote:
No, of course I am not sure yet. I have only begun testing this method.
Not sharing common hardware (separate USM-6008s).
Here is the whole picture:
I have developed a top-level VI that performs Daqmx IO using a single USB-6008. The top-level VI references a Project Daqmx Task that points to the desired 6008. I would like to create a single UI that uses this top-level VI to control twoUSB-6008s simultaneously. I thought I could build the top-level VI into 2 separate exes, where the only difference between the exes is the hardware it points to (one exe to each of the 6008s). But I have been unsuccessful at running these two exes within a single UI. I attempted use subpanels on a tab control to do this but I am unable to obtain a reference to the top-level vis once they have been built into an exe. I have also tried building a dll and exporting the top-level vi from the dll build but i can't seem to get that to work either. In both of these cases my Open VI reference function returns errors (Error 1445). I am aware of the changes in referencing VIs from within an exe/dll since LV8.2 - http://digital.ni.com/public.nsf/allkb/8545726A00272EB0862571DA005B896C
The link seems to suggest that I should be able to obtain a reference to the top-level vi within the dll but I can't get it to work.
So I then moved on to the above method (making all the subvis reentrant). I just haven't figured this all out yet.
If you have suggestions on other problems I may run into please share. I think I can eliminate my FGs but haven't gotten back to this yet.
Thanks
Dan
When I am designing apps of the type you described I have kept the ned goal in mind from the begining since of the issue you are mentioning. I also don't want to tell you to throw it all away and start over. So with that in mind I have been looking at your posts and only offering the least destrutive ideas first. With that in mind I would like to invite yo uto look at the code i posted in this thread (reply #18 has a zip).
That code shows how to realize un-dockable GUI regions but it passes the ref of the top level VI to a reentrant VI it instanciate for each undockable region. It may have enough hints and technique to give you some ideas that will work for you.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can i use both Component video and HDMI?

Hi guys,
Im wondering if its possible to connect both Component video and HDMI on the ATV?
Its currently connected to HDMI on our main HD TV, however, the apartment we have has a strange setup in which you must send RF signals to a loop back in the main room to reach all other TV's.
We dont have the capital for either another flatscreen TV or a second Apple TV until next year - so currently we've got an older (see 2004) bulk of a CRT TV upstairs and my thought was i could route a signal to the RF loop back from the ATV and use my iphone remote to control what it plays to view upstairs.
For this id need a component to composite/rf convertor which ive found so sending the signal is no problem, but what would happen if i were to connect component cables as well as the HDMI, does the ATV output on both, or priortise the HDMI?

When both types of cable are connected to the tv at the same time, the HDMI connection will be on by default but the component is turned off... and what happens if the source to the HDMI cable is off - eg its plugged in but its got no where to send the signal, would it still not send to the component?.. You mean if the tv was off, same thing, HDMI would take precedence.
Are you sure about this, Winston? I have only 2 component (and 2 HDMI) inputs on my Panasonic HDTV. For this reason I invested in an Audio Authority Component Switcher (Model 1154A) a few years ago. When the TV device arrived I connected it directly to the HDTV via my HDMI-2 HDTV input and also connected the component video and optical audio to the switcher. I have no problem using the HDTV's input selector to switch back and forth between component and HDMI lines. While I admit I cannot split the screen between an HDMI input and anything else for simultaneous viewing, I can leave both lines plugged in and switch between the two lines. In addition, the activity light on the switcher indicates there is a signal present on the switcher even when I am watching the HDMI line. (Of course, this may simply be triggered by the switcher's optical audio signal since I normally watch the TV video via the HDMI line (with HDMI audio muted) and use the optical audio line to drive my receiver's AC3 decoder so I can enjoy 5.1 audio with my latest conversions.) Am, therefore, wondering if the OP may have the same capability and could then simply switch to a different input mode to "de-negotiate" his HDMI connection and allow access to whatever component device he needs as long as he doesn't need simultaneous viewing on both TVs.

Can we use both Stand alone and Extended classic in one SRM system

Hi All,
Our client is now using Stand alone SRM system with back-end R/3 FI-CO system. Now they want to go Extended classic scenario for few product categories.
         Would it be possible to use both in one SRM system? If possible could you please provide what are the sequential steps to do this?
             Thanks in advance.
Regards,
Ram

Hi Ramesh,
How did you end up solving your problem, as i have the same scenario. Did you use this BADI (
SRM Server->Business Add-Ins->Control Extended Classic Scenario->Activate Extended Classic Scenario)? Based on my reading, it seems this BADI is relevant to switch between extended classic and classic scenarios.
From what i understand, we can control the standalone scenario via the define backend system configuration (SAP SRM -> SRM Server -> Technical Basic Settings -> Define Backend System for Product Category). In my scenario, I have one set of product categories, so i will likely need to implement this BADI (BBP_DETERMINE_LOGSYS, method:   DETERMINE_LOGSYS - SAP SRM -> SRM Server -> Business Add-Ins ->Shopping Carts and Requirement Items -> Determine Backend System / Company Code) in order to determine the correct backend system based on company/plant for example.
Did you then leave the extended classic scenario activated (IMG --> Supplier Relationship Management -> SRM Server-> Cross-Application Basic Settings->
Activate Extended Classic Scenario)?
Or how did you achieve both standalone and extended classic using one SRM server?
cheers,
AD

Can I have both iMovie 09 and iMovie 08 installed on the same Mac?

Hi,
This question may seem odd, but... I work at a college. In my role there, I provide training for students and faculty using a variety of technologies (including the iLife suite). I would like to purchase and install iLife 09 for my Mac for personal and professional use; however, I also need to maintain iLife 08 applications for training purposes for work. Is it possible to have both versions installed simultaneously?
Thanks!

Yes, you can, although Apple does not support the methods shown below. Here's how you can do it:
_*If you have NOT installed the iLife09 upgrade yet......*_
a) Open Finder & click on the "Applications folder"
b) Click on the "New Folder" icon and name the folder anything you want (like iMovie08)
c) drag the iMovie.app into the folder
d) install iLife09....you will now be able to open iMovie09 by clicking on the icon in your dock, or open iMovie08 by going to the newly created folder and clicking on the older iMovie.app file.
_*If you have already installed iLife09........*_
----IMPORTANT----
*MAKE SURE YOU HAVE A BACKUP OF YOUR MAC in case something goes wrong, such as a recent Time Machine backup so you can restore your files!!!! Also, make sure you have the original installation disks for both iLife08 and iLife09, or the OSX installation disks with iLife08 on it..........*
a) Open Finder & click on "Macintosh HD", then open the "Library" folder, then open the "Receipts" folder
b) Scroll down and find the files marked *iMovie.pkg, iMovie_712.pkg, iMovie_713.pkg, iMovie_714.pkg*, etc. You will not have all of those files, and the numbers may be different than 712 or 713, etc. Move these files to the Trash. *DO NOT MOVE iMovie_PreviousFolder.pkg or iMovieHD6.pkg to the Trash if you have them...keep them in the Receipts folder.*
c) Open Finder & click on the "Applications" folder, then find iMovie.app and move it to the Trash
d) Open Finder & click on the "Macintosh HD", then open the "Users" folder, then open your user folder (i.e., "Paul"), then open the "Library" folder, then open the "Preferences" folder, then move *com.apple.iMovie.plist, com.apple.iMovie7.plist and com.apple.iMovie8.plist* to the Trash. You may not have all of these files, or you may have different names for your preference files, but as a general rule, any preference files with the words iMovie should be moved to the trash.
e) Put your iLife08 or OSX install disk 1 in your DVD drive
f) Double-click on "iLife08.mpkg" (iLife08 install disk) or "Install Bundled Software only" (OSX install disk)
g) When the "Install iLife08" or "Install Bundled Applications" window appears, click on continue for all the agreements until you get to the "Standard Install" screen. Click on "Customize" and a new screen will appear with a list of all the applications (iLife08) or the words "Bundled Applications" in the OSX install disk, and next to those words is a small arrow....click on that to show the contents of the installation software. Uncheck all boxes except iMovie. Make sure that box is checked, then click on "Install" and follow all prompts to install iMovie08 back to your Mac.
h) Once iMovie08 is back in your Mac, you will need to move it to a new folder as follows:
i) Open Finder & click on the "Applications" folder
j) Click on the "New Folder" icon and name the folder anything you want (like iMovie08)
k) drag the iMovie.app into the folder
l) Now, reinstall iMovie09 as follows....
m) Put your iLife09 install disk in your DVD drive
n) Double-click on "iLife09.mpkg"
o) When the "Install iLife09" window appears, click on continue for all the agreements until you get to the "Standard Install" screen. Click on "Customize" and a new screen will appear with a list of all the applications. Uncheck all boxes except iMovie. Make sure that box is checked, then click on "Install" and follow all prompts to install iMovie09 back to your Mac.
p) You will now be able to open iMovie09 by clicking on the icon in your dock, or open iMovie08 by going to the newly created folder and clicking on the older iMovie.app file
Hope this helps!

Using both Enterprise library and Entity framework as DAL for same application

We have been using EF for large amount of data retrieval in our current application. We faced performance related issues with using EF with large data retrieval and manipulation.
We need to extend the same project with some additional functionality similar to what currently exists in the application and uses EF.
For the new functionality, we do not want to use EF and want to use enterprise library for Data access.
My question is if we use both entity framework for parts of the application data access mechanism and enterprise library for other parts of application data access, are there any known issues?
if there are any best practices to be followed please share .

We have been using EF for large dataset retrieval in our current application. We faced performance related issues with using EF for large data set's .
Dataset? What are you talking about? If you are using the salad bowl, the dataset with datatables, then here is the reason not to use them.
http://lauteikkehn.blogspot.com/2012/03/datatable-vs-list.html
My question is if we use both entity framework for parts of the application data access mechanism and enterprise library for other parts of application data access, are there any known issues?
What is Entlib going to buy you in performance? It's going to buy you nothing. You'll be better of going to the EF backdoor, use SQL command objects, inline T-SQL, sprocs, datareder and using custom objects or objects off of the virtual model returning a
single object or objects in a collction., if you are concerned about performance.
http://blogs.msdn.com/b/alexj/archive/2009/11/07/tip-41-how-to-execute-t-sql-directly-against-the-database.aspx
You'll probably be better of going to Entity SQL, using a datareader, collection and using custom objects or objects off of the model, if you are concerned about query performance.
https://msdn.microsoft.com/en-us/library/vstudio/bb738684(v=vs.100).aspx
https://msdn.microsoft.com/en-us/library/vstudio/bb387145(v=vs.100).aspx
https://msdn.microsoft.com/en-us/library/vstudio/bb399560(v=vs.100).aspx
My question is if we use both entity framework for parts of the application data access mechanism and enterprise library for other parts of application data access,
are there any known issues?
A nightmare, no consistency and complete Helter Skelter is what I see. Been there and seen it in action with different technologies doing the same thing in a solution.

Possible to use both optical out AND regular line out at the same time?

I currently have my computer speakers (logitech z560) hooked up to the mac pro via regular stereo jack in the back. I have an extra receiver that I would love to hook in to supply me with some needed sound for movie watching and what-not.. Is there a way to enable both line out - digital and line out at the same time?

You can set DVD Player's "Audio output" to "Digital Out" in its "Disc Setup" preference, while other applications use Line Out.
You could use a splitter on Line Out to feed your current speakers, and analog Line In on your receiver. When you want sound to both systems, set the receiver to Line In. When you want to watch DVDs, set it to Digital In. This will give you surround sound if the DVD has multichannel sound, and the receiver supports more than two channels.
If you really want the same output on the Mac Pro Line Out, and Digital Out, you can use the "Auxiliary Device Output" effect in Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
It will not support more than two-channel audio.

Can i use both the ibook and kindle ebook apps on the same ipod?

Similar Messages

Maybe you are looking for