Can i use C Code at Compact Vision or Compact Rio?

hi,
i have a very important question!!
can i use the C code that the Vision Assistant generates, in the compact vision system, even in DLL form??? if yes, how can i download it to the compact vison?
can i use C code at the compact rio?
greets,
gerald

You can use C-Code on Realtime targets (Such as C-Rio or a Compact Vision system) as long as you compile a DLL out of it, and call this DLL from LabView. Take care that no Windows-Specific things are in the dll (MFC, ActiveX, Windows SDK etc.).
As you always need LabView, to use the dll, it would be better to create a LabView VI from the Vision Assistant, and download this VI to your Compact Vision System.

Similar Messages

Can we Use T Code MIRA instead of MIRO for posting incoming invoice?

Hi All,
Can we Use T Code MIRA instead of MIRO for posting incoming invoice?
While trying to post a incoming invoice using MIRO, I am getting a error "HKONT is EMPTY". But when using MIRA i could get the invoice posted.
And in which situations we use MIRA?
Thanks in Advance
Gopi Krishna

Hello
MIRA is for Invoice Verification in the Background
Purpose
This process is suitable for the following transactions:
Posting invoices with mass amounts of data for which no item check is required
Posting invoices referring to transactions not yet entered in the system
Entering Invoices for Verification in the Background (Without Item List)
When verifying invoices in the background, you enter only a small set of document header data, such as the invoice amount, the currency and the tax information. You also allocate the incoming invoice to a purchasing document or a vendor. The system saves the data and allocation criteria you enter.
At a later point, the system verifies the invoice in the background. It uses the allocation criteria you entered to determine the item list. It then calculates the net total from the item list.
If the net total = gross amount invoiced - tax amount (+/- tolerance), the system posts the invoice in the background.
If the net total ¹ gross amount invoiced - tax amount (+/- tolerance), the system does not post the invoice in the background. It saves the document header data and the items determined in the background; the saved document then has to be processed manually in Invoice Verification.
With Invoice Verification in the background, the system does not check for any quantity or price differences at item level. Since you do not enter any actual invoice item data, the system uses the default data for comparison.
Regards
Gregory Mathews

How can i use jquery code in ExtendedRenderKitService?

i'm try to using jquery like this way,but cause js error.
so,can i use jqeury code in ExtendedRenderKitService? how?
private String jsFunction() {
StringBuilder sb = new StringBuilder();
sb.append("$(document).ready(function(){");
sb.append("var spans = $('span');");
sb.append("alert(spans.length);");
sb.append(" });");
return sb.toString();
public void searchTree(ActionEvent actionEvent) {
favoriteTreeManager.searchTree(searchCriterium);
FacesContext context = FacesContext.getCurrentInstance();
ExtendedRenderKitService extRenderKitSrvc =
Service.getRenderKitService(context, ExtendedRenderKitService.class);
extRenderKitSrvc.addScript(context,
jsFunction());
}

Hi,
$('span') is invoked when the page renders if I remember correctly. Since using JavaScript from a managed bean invokes a function, the use of JQuery does not work. You can run a little test. If you get JQuery working from a URL browser typing javascript:... command ... then the same probably works from a managed bean
Frank

How can i use a code for an app in venezuela that was sent to me from the states?

Please my cousin sent me an app as a gift but when i try to download it pops a message that says that my code will work just for store in the us, does anybody knows how change that code or any other way to use it here in Venezuela? thanks a lot

As stated, that code will only work in the US App Store. Ask your cousin to contact iTunes support, explain your situation and see if they can issue him a code that will work in the Venezuela store.
http://www.apple.com/support/contact/

Can I use PHP code in BC

Yes, that is basically my question. Can I use php coding in Business Catalyst? And does BC us mysql database?
Thank you

Hi there, Please do a quick forum search before posting. This is asked a lot - You can even see a post in the frequently asked questions panel on the main page of this forum section.
BC is a SAAS - Software as a service and a .Net based SQL system - It does not use PHP or mysql and you can not access the server side code.
So to your question - that is a no I am affraid.

Can I use this code to self Generate month ? ie Jan, Feb, Mar

Hi can some one tell me is this possible to do.
I am making a Date Of Birth using combo box�s this is the code I am using to generate the date.
My question is can I use this for the month i.e. Jan, Feb, Mar etc
private void DayOfTheMonth(int highNumber,JComboBox comboBox){
comboBox.addItem(" ");
for (int index = 1; index < highNumber; index++) {
comboBox.addItem(String.valueOf(index));
private void DaySpecificComboBox()
//Day is stopat 32 as there is 31 days in the month
DayOfTheMonth( 32, DayjComboBox);
}

Hi,
This can be done with the help of your abaoer, you can have the required texts from the table T009C, otherwise the programmer can hard code the months as you given.
Regards,
Vasu.

How can i use ADF code in Trinidad

Hi,
I'm having an small Application which is Implemented to some extent using oracle ADF faces components But now, as the Trinidad is an open source i would like to do it in trinidad.
If i replace the libraries to trinidad does my implement code in ADF Faces components needs to be Change,
Please Suggest me how can use my ADF code in Trinidad.
Thanks.

Hi,
Thanks for the Information a lot,it will helps me a lot.
i am unable to navigate to down load the libraries given in oracle site in "How-to configure Apache Trinidad components in Oracle JDeveloper " can u help me,
how can i get libraries to use in Oracle Jdeveloper for Trinidad.
Can i use the libraries given on the Apache MyFaces Trinidad site (http://myfaces.apache.org/trinidad/download.html) but the libraries are different than the oracle given.
Please Help me what libraries to used in Oracle jdeveloper 10g for trinidad.
Thank You.

When can I use USSD code in iPad ?

Dears,
I'm using iPad Mini 2 with Cellular. Sometimes I need to use USSD code to check internet balance but i can't.
Do you have plan to update USSD Code Function in iPad in the future ?
Best Regards,
Phatcharaphon JO

crazyiv wrote:
Do you have plan to update USSD Code Function in iPad in the future ?
Personally, no, I have no such plans.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Can I use Ultraviolet codes on iTunes?

I Wanna buy a movie on Amazon but it saids ultraviolet not digital. So my question is can I use the ultraviolet code on iTunes?

Best to look for the logo

Can I use Edge Code to modify my outdated FreeBsd site? I have Edge Code installed on a Mac.

Do people do this? How would it work? Thanks for any guidance.

You can edit the source code to any website using Edge Code as long as the source files are accessible locally on your computer. So if the website lives on your FreeBsd server, you'll need to copy them onto your Mac first before you can open them, then upload them back to have your changes reflected on the live site. Extensions like FTP Sync can help with this, or you can do it manually.
Hope that helps!
- Peter

Can I use C code in labview?

Hello, I've got a fairly complicated program I've written in C that
requires two doubles to be passed to it and it spits out two integers
as a result of a very detailed calculation. Is there a way to have
labview call this C function? I've tried searching the NI.com website
but all I could find were examples where labview was being compared to
C in an attempt to show how they are equal. Any advice/links to
relevant information or tutorials would be greatly appreciated.

You have two possibilities:
Compile your C code into a DLL and call it with "Call Library Function Node".
Use the "Code Interface Node".
The LabVIEW Bookshelf (under help) contains a PDF document name "Using external code in LabVIEW". It will probably answer all your questions. Good luck
LabVIEW Champion . Do more with less code and in less time .

How can I use Javascript code to affect the display of textField?

Hi All,
I created a web application using JSF.
And Placed two controls: one Text Field and one Label.
On the Javascript onclick event of Label, I wrote the following javascript:
document.getElementById("form1:textField1").value="test123";
I run the web application, and click on the label, However, the text of the Text Field does not change.
But the following code shows text of the Text Field has been changed. it works.
alert(ocument.getElementById("form1:textField1").value);
So, why the display of the Text Field does not change? How to update the display of the Text Field?
Any suggestion will be helpful!
Thank you.

here is a full and correct example, enjoy
1. <html>
2. <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
3. <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
4. <f:view>
5. <head>
6. <title>
7. <h:outputText value="#{msgs.windowTitle}"/>
8. </title>
9. </head>
10. <body>
11. <h:form id="registerForm">
12. <table>
13. <tr>
14. <td>
15. <h:outputText value="#{msgs.namePrompt}"/>
16. </td>
17. <td>
18. <h:inputText/>
19. </td>
20. </tr>
21. <tr>
22. <td>
23. <h:outputText value="#{msgs.passwordPrompt}"/>
24. </td>
25. <td>
26. <h:inputSecret id="password"/>
27. </td>
28. </tr>
29. <tr>
30. <td>
31. <h:outputText value="#{msgs.confirmPasswordPrompt}"/>
32. </td>
33. <td>
34. <h:inputSecret id="passwordConfirm"/>
35. </td>
36. </tr>
37. </table>
38. <h:commandButton type="button" value="Submit Form"
39. onclick="checkPassword(this.form)"/>
40. </h:form>
41. </body>
42. <script type="text/javascript">
43. 
54. </script>
55. </f:view>
56. </html>

Can I use native code in a DPS iPad app?

Hi.
We're building an app in DPS for the iPad. But we'd like one folio to be a game written in code, using Unity.
Is this possible?

No. The only extensibility point in DPS is via HTML, either through a web overlay or HTML article.
Neil

HT3775 how can I use this codes? and Where?

I am trying to watch a Trailer for leapPad2 and I can't. It's showing me a massage that I need a special software for that and for more information press TELL ME MORE. When I do that it just showing me some codes. I don't know what should I do with those!

You might try installing this Free plugin called "Perian" that has worked for some other Users:
http://perian.en.softonic.com/mac

Can I use pass codes before opening each and every application ?

How can I trace my Ipad if stolen, as it shows current location on itself, is there any method that I can do to track it?

You can use icloud.com/find my phone on any desktop computer web browser

Can i use C Code at Compact Vision or Compact Rio?

Similar Messages

Maybe you are looking for