Can i use call transaction in BAPI
Can I use call transaction in a BAPI and create master record.
There is no reason AS LONG AS this BAPI will not accessed from an external system. BAPIs are intended to accessed by external systems... otherwise, creating a Func Module is just fine.
I would be cautious with using BDCs. SAP continually changes screens with each upgrade. When you use BDCs, you are TOTALLY dependent on those screen fields. And when an upgrade changes a screen, you have extra work to do to fix your BDC in the new version.
By using a BAPI or a Func Mod, your impact from an upgrade is greatly reduced.
Remember to reward points accordingly.
Message was edited by: John Jakabcsin
Message was edited by: John Jakabcsin
Similar Messages
-
Can we use Call transaction and session method in same program ?
Hi experts,
Is it suggested to use call Transaction and session method in the same Program ?
i have a doubt , why cant we use multiple call transactions in same program instead of session method if we have multiple transaction updations ?Hi Dengyong Zhang,
we can use the call transation and session method in same program.
However for better performance it's benificial to use call trasaction method of BDC. but if u want to upload very large amount of data then Session method is more preferable to use.
Session method is one of the method of BDC.
U can also use BAPI to upload the data in SAP but it's a different concept than BDC. Performance wise BAPI is more advantageous than BDC. -
How to use call transaction stmt from webdynpro application
Hi Expers,
Can I use call transaction 'tcode' in my webdynpro application, I have tried in my application but i am getting short dump saying
Error analysis+
An exception occurred that is explained in detail below.The exception, which is assigned to class'CX_SY_SEND_DYNPRO_NO_RECEIVER', was not caught and therefore caused a runtime error. The reason for the exception is: During background processing, the system attempted to send a screen to a user. Current screen: "SAPLMGMM " 0060.
I haven't used any more statements in my application am sure from my application side everything perfect. but I have seen a screen shot
with SAP screen in webbrowser.
Please help me out if you are not clear abt my doubt please ask me for clear idea.
Thanks in advance
Phalani MHello,
Since you can't use the call transaction command in web dynpros components, I suggest you to create a report and fill a BDC table on this and use the call transaction in this report.
So, in your web dynpro component you can use a command SUBMIT to create a job in background.
DATA: number TYPE tbtcjob-jobcount,
name TYPE tbtcjob-jobname VALUE 'JOB_TEST',
print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Regards. -
How we can use call transaction xd03 in alv report
hey guys i want now that how we can use call transaction xd03 in alv report by using various tables in report or coding.
can you tell me about that by the way of coding so that it can be easy for me to understand and help ful to make report by using alv report with many tables. so please send me .
Moderator message: it seems to be XD03 day today, please search for available information/documentation/previous discussions.
Edited by: Thomas Zloch on Nov 25, 2011 1:24 PMWhere?
Max -
Error 00-341 RAISE_EXCEPTION when using Call Transaction for VA01 in backgr
Hi,
I am getting this message when I use call transaction to create a sales order using VA01. Following is the statement I have used. Note that when i execute the program online, I am not getting any errors. I could create sales order without any problem. I am getting this exception only when I run in background.
CALL TRANSACTION 'VA01'
USING BDC_TAB
MODE 'N'
UPDATE 'S'
MESSAGES INTO W_MESS_TAB.
When I captured message tab, I got following messages.
DC006 - Control Framework: Fatal error - GUI cannot be reached
00341 Runtime error RAISE_EXCEPTION has occurred.
Please help me in this regard.
Regards
KasiSome times execution of BDC program in back ground is different from the foreground. Some screens may appear in background and raise error while same will not when executed in foreground.
Double click the message in Session log to know more details.
One way is to suppress the screen while executing BDC.
Alternatively I suggest to use BAPI instead.
- Sanjay -
Hi ,
This is vijay...
can anyone help me plz
Hi,
Iam uploading data using call transaction.Tcode is ff67.In this TCode we have the begining balance(ssald) and ending balance(esald).The new record we are uploading will take the begining balance as the previous record ending balance, if we give the begining balance wrong then the record does not saved it will show error(the begining balance does not match with the prior ending balance).
while uploading the data using MODE A iam able to get the desired output but by using the MODE N iam not able to get the desired output i,e if there is any error in the begining balance also the record is being saved iam not getting the error message.
Iam attaching the code below..please help me
report Z_BRS_BDC no standard page heading line-size 255.
INTERNAL TABLES DECLARATIONS
DATA : BEGIN OF bdcdata OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA : END OF bdcdata.
DATA: LV_OUT TYPE STRING.
DATA : iopt LIKE ctu_params.
DATA : wa_rec_err TYPE i.
DATA : wa_rec_wri TYPE i.
DATA : wa_tot_rec TYPE i.
DATA : amt(16) type c.
DATA : BEGIN OF gu_upload OCCURS 0,
hbkid LIKE febmka-hbkid,
hktid LIKE febmka-hktid,
aznum LIKE febmka-aznum,
azdat LIKE febmka-azdat,
ssald LIKE amt,
esald LIKE amt,
budtm LIKE febmka-budtm,
mnam1 LIKE febmka-mnam1,
jname LIKE febmka-jname,
vgman LIKE febmka-vgman,
valut LIKE febep-valut,
kwbtr(13) TYPE c,
chect_kf LIKE febmkk-chect_kf,
END OF gu_upload.
DATA:GU_DOWNLOAD LIKE GU_UPLOAD OCCURS 0 WITH HEADER LINE.
kishi*********************************
DATA: BEGIN OF itab OCCURS 0,
vgman LIKE febmka-vgman,
valut LIKE febep-valut,
kwbtr(13) TYPE c,
chect_kf LIKE febmkk-chect_kf,
END OF itab.
kishi)(_()00-8-09
DATA: BEGIN OF messtab OCCURS 0.
INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
DATA: BEGIN OF messtab1 OCCURS 0.
INCLUDE STRUCTURE messtab.
DATA: END OF messtab1.
DATA : BEGIN OF int_count OCCURS 0.
INCLUDE STRUCTURE alsmex_tabline.
DATA : END OF int_count.
DATA: c_tcode LIKE sy-tcode VALUE 'FF67',
c_upd LIKE ctu_params-updmode VALUE 'S',
c_def_size LIKE ctu_params-defsize VALUE 'X'.
*VALUES FOR STARTING COLUMNS AND ROWS IN THE EXCEL SHEET
DATA : c_begcol TYPE i VALUE '1',
c_begrow TYPE i VALUE '1',
*DATA IS ENDED AT THE 13TH COLUMN IN THE EXCELSHEET
c_endcol TYPE i VALUE '13',
*LAST ROW IN THE EXCEL SHEET
c_endrow TYPE i VALUE '65536',
c_path(3) TYPE c VALUE 'C:\'.
*Field Symbols
FIELD-SYMBOLS: <fs>.
SELECTION SCREEN PARAMETERS
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file LIKE rlgrap-filename DEFAULT
'C:\ ',
*This is the path for downloading file
P_FNAME2 LIKE RLGRAP-FILENAME ,
c_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*F4 HELP FOR FILE SELECTION
PERFORM validate_input_file.
START-OF-SELECTION.
CLEAR gu_upload.
REFRESH gu_upload.
UPLOAD THE DATA FROM FLAT FILE TO INTERNAL TABLE
PERFORM file_upload.
iopt-dismode = c_mode.
iopt-updmode = c_upd.
iopt-defsize = c_def_size.
POPULATE THE DATA THROUGHSCREENS
PERFORM bdc_upload.
END-OF-SELECTION.
*DISPLY THE ERROR RECORDS
PERFORM DISPLAY-DATA.
FORM file_upload *
FORM file_upload.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file
i_begin_col = c_begcol
i_begin_row = c_begrow
i_end_col = c_endcol
i_end_row = c_endrow
TABLES
intern = int_count
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
LOOP AT int_count.
ASSIGN COMPONENT int_count-col OF STRUCTURE gu_upload TO <fs>.
IF sy-subrc NE 0.
EXIT.
ENDIF.
<fs> = int_count-value.
AT END OF row.
APPEND gu_upload.
CLEAR gu_upload.
ENDAT.
ENDLOOP.
*kishhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
LOOP AT gu_upload.
itab-vgman = gu_upload-vgman.
itab-valut = gu_upload-valut.
itab-kwbtr = gu_upload-kwbtr.
itab-chect_kf = gu_upload-chect_kf.
APPEND itab.
ENDLOOP.
*kishiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
ENDFORM. "file_upload
*& Form BDC_UPLOAD
FORM bdc_upload.
LOOP AT gu_upload.
CLEAR bdcdata.
REFRESH bdcdata.
*& POPULATE THE DATA FOR FIRST SCREEN
perform bdc_dynpro using 'SAPMF40K' '0101'.
perform bdc_field using 'BDC_CURSOR'
'FEBMKA-JNAME'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'FEBMKA-BUKRS'
'IN14'.
perform bdc_field using 'FEBMKA-HBKID'
gu_upload-hbkid.
perform bdc_field using 'FEBMKA-HKTID'
gu_upload-hktid.
perform bdc_field using 'FEBMKA-AZNUM'
gu_upload-aznum.
perform bdc_field using 'FEBMKA-AZDAT'
gu_upload-azdat.
perform bdc_field using 'FEBMKA-SSALD'
gu_upload-ssald.
perform bdc_field using 'FEBMKA-ESALD'
gu_upload-esald.
perform bdc_field using 'FEBMKA-BUDTM'
gu_upload-budtm.
perform bdc_field using 'FEBMKA-MNAM1'
gu_upload-mnam1.
perform bdc_field using 'FEBMKA-JNAME'
gu_upload-jname.
*& POPULATE THE DATA FOR SECOND SCREEN
DATA : fnam(20) TYPE c,
idx TYPE c.
MOVE 1 TO idx.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF40K' '8000'.
PERFORM bdc_field USING 'BDC_CURSOR'
'FEBMKK-CHECT_KF(03)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CONCATENATE 'FEBMKA-VGMAN(' idx ')' INTO fnam.
PERFORM bdc_field USING fnam
itab-vgman.
CONCATENATE 'FEBEP-VALUT(' idx ')' INTO fnam.
PERFORM bdc_field USING fnam itab-valut.
CONCATENATE 'FEBMKA-KWBTR(' idx ')' INTO fnam.
PERFORM bdc_field USING fnam itab-kwbtr.
CONCATENATE 'FEBMKK-CHECT_KF(' idx ')' INTO fnam.
PERFORM bdc_field USING fnam itab-chect_kf.
idx = idx + 1.
ENDLOOP.
*perform bdc_dynpro using 'SAPMF40K' '8000'.
*perform bdc_field using 'BDC_CURSOR'
'FEBMKK-CHECT_KF(01)'.
*perform bdc_field using 'BDC_OKCODE'
'/00'.
*perform bdc_field using 'FEBMKA-VGMAN(01)'
'z001'.
*perform bdc_field using 'FEBEP-VALUT(01)'
'2007/04/26'.
*perform bdc_field using 'FEBMKA-KWBTR(01)'
' 5000-'.
*perform bdc_field using 'FEBMKK-CHECT_KF(01)'
'1122'.
perform bdc_dynpro using 'SAPMF40K' '8000'.
perform bdc_field using 'BDC_CURSOR'
'FEBMKK-CHECT_KF(01)'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
*& POPULATE THE DATA FOR FOURTH SCREEN
perform bdc_dynpro using 'SAPMF40K' '0101'.
perform bdc_field using 'BDC_CURSOR'
'FEBMKA-BUKRS'.
perform bdc_field using 'BDC_OKCODE'
'=BUCH'.
perform bdc_field using 'FEBMKA-BUKRS'
'IN14'.
perform bdc_field using 'FEBMKA-HBKID'
gu_upload-hbkid.
perform bdc_field using 'FEBMKA-HKTID'
gu_upload-hktid.
perform bdc_field using 'FEBMKA-AZNUM'
gu_upload-aznum.
perform bdc_field using 'FEBMKA-AZDAT'
gu_upload-azdat.
perform bdc_field using 'FEBMKA-SSALD'
gu_upload-ssald.
perform bdc_field using 'FEBMKA-ESALD'
gu_upload-esald.
perform bdc_field using 'FEBMKA-BUDTM'
gu_upload-budtm.
perform bdc_field using 'FEBMKA-MNAM1'
gu_upload-mnam1.
perform bdc_field using 'FEBMKA-JNAME'
gu_upload-jname.
*perform bdc_dynpro using 'SAPMF40K' '0101'.
*perform bdc_field using 'BDC_OKCODE'
'/EENDE'.
*perform bdc_field using 'BDC_CURSOR'
'FEBMKA-BUKRS'.
perform bdc_dynpro using 'SAPMF40K' '0101'.
perform bdc_field using 'BDC_OKCODE'
'/EABBR'.
perform bdc_field using 'BDC_CURSOR'
'FEBMKA-BUKRS'.
*& USING THE CALL TRANSACTION
PERFORM call_transaction.
CLEAR BDCDATA. "<--- Add here
REFRESH BDCDATA. "<--- Add here
ENDLOOP.
ENDFORM. " BDC_UPLOAD
*& Form VALIDATE_INPUT_FILE
FORM validate_input_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_path = ' c:\ '
mask = ',.txt,.*.'
mode = 'O'
title = 'Upload '
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
IF sy-subrc <> 0 AND sy-subrc <> 3.
MESSAGE e100(zm) WITH text-007.
ENDIF.
ENDFORM. " VALIDATE_INPUT_FILE
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "bdc_dynpro
Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "bdc_field
*& Form CALL_TRANSACTION
FORM call_transaction.
DATA: l_index LIKE sy-tabix.
CALL TRANSACTION c_tcode USING bdcdata
MODE c_mode
MESSAGES INTO messtab.
*POPULATE THE ERROR RECORDS INTO INTERNAL TABLE
IF SY-SUBRC NE 0.
GU_DOWNLOAD-HBKID = GU_UPLOAD-HBKID.
GU_DOWNLOAD-HBKID = GU_UPLOAD-HBKID.
GU_DOWNLOAD-HKTID = GU_UPLOAD-HKTID.
GU_DOWNLOAD-AZNUM = GU_UPLOAD-AZNUM.
GU_DOWNLOAD-AZDAT = GU_UPLOAD-AZDAT.
GU_DOWNLOAD-ESALD = GU_UPLOAD-ESALD.
GU_DOWNLOAD-SSALD = GU_UPLOAD-SSALD.
GU_DOWNLOAD-BUDTM = GU_UPLOAD-BUDTM.
GU_DOWNLOAD-MNAM1 = GU_UPLOAD-MNAM1.
GU_DOWNLOAD-JNAME = GU_UPLOAD-JNAME.
GU_DOWNLOAD-VGMAN = GU_UPLOAD-VGMAN.
GU_DOWNLOAD-VALUT = GU_UPLOAD-VALUT.
GU_DOWNLOAD-KWBTR = GU_UPLOAD-KWBTR.
GU_DOWNLOAD-CHECT_KF = GU_UPLOAD-CHECT_KF.
APPEND GU_DOWNLOAD.
*DISPLAY THE PROGRESS OF PROCESS
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = 'Downloading is in process'.
*DOWNLOADING THE ERROR RECORD
LV_OUT = P_FNAME2.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = LV_OUT
WRITE_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = GU_DOWNLOAD.
ENDIF.
IF NOT messtab[] IS INITIAL.
PERFORM format_message.
ENDIF.
ENDFORM. " CALL_TRANSACTION
*& Form DISPLAY-DATA
FORM display-data.
SKIP.
WRITE: 'SY-SUBRC' , sy-subrc.
ENDFORM. " DISPLAY-DATA
FORM FORMAT_MESSAGE *
FORM format_message.
DATA: l_msg(100),
l_index LIKE sy-tabix.
LOOP AT messtab.
READ TABLE gu_upload INDEX l_index.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab-msgid
lang = sy-langu
no = messtab-msgnr
v1 = messtab-msgv1
v2 = messtab-msgv2
v3 = messtab-msgv3
v4 = messtab-msgv4
IMPORTING
msg = l_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE:/ l_msg.
ENDLOOP.
WRITE:/ l_msg.
ENDFORM.
Message was edited by:
vijayd duvvadaHi,
First , keep the mode "E" and check the debugger , you can exactly see where the error is and let me know, what error and where it is stoping.
By your coding, i suppose to think that, its proble in the amount (currency). When ever you are try to pass the value, and value is not there in upload file or data is mismatch, the call transaction will fail in mode 'A' and succesful in mode 'N'.
In that situation use this before the currecny field.
IF NOT FEBMKA-SSALD IS INTIAL.
perform bdc_field using 'FEBMKA-ESALD'
gu_upload-esald.
ENDIF.
tHANKS
Manju -
Skip first screen of BD87 using call transaction with BDC_DATA option
hello all,
i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
regards.Hi
Build a BDCDATA with following code..
T BD87
RBDMON00 1100 X
BDC_CURSOR SX_DOCNU-LOW
BDC_OKCODE =CRET
SX_DOCNU-LOW
SX_CRETI-LOW 00:00:00
SX_CRETI-HIGH 00:00:00
SX_UPDDA-LOW 05.02.2010
SX_UPDDA-HIGH 05.02.2010
SX_UPDTI-LOW 00:00:00
SX_UPDTI-HIGH 00:00:00
RBDMON00 0100 X
BDC_OKCODE =BACK
RBDMON00 1100 X
BDC_OKCODE /ECBAC
BDC_CURSOR SX_DOCNU-LOW -
Type of error in the log file while using using call transaction mode u2018Eu2019
Hi Gurus,
Please Answer for this qusetion urgently
what type of error exactly you will be seeing in the log file while using call transaction mode u2018Eu2019?
Thanks/
Radha.Hi,
Can you be clear.
In call transaction , no error logs are created, you have to handle the errors explicitly using the structure BDCMSGCOLL.
Whenever you use E mode then if the transaction encounters any of the errors i.e. data type mismatching or invalid values etc, it will stop at that screen.
You can handle the errors in call transaction in the following method.
create a table using the structure BDCMSGCOLL.
then
loop at ......
CALL TRANSACTION 'XK01' USING I_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO I_MESGTAB.
endloop.
SORT I_MESGTAB BY MSGID MSGV1 ASCENDING.
DELETE ADJACENT DUPLICATES FROM I_MESGTAB.
LOOP AT I_MESGTAB.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = I_MESGTAB-MSGID
LANG = I_MESGTAB-MSGSPRA
NO = I_MESGTAB-MSGNR
V1 = I_MESGTAB-MSGV1
V2 = I_MESGTAB-MSGV2
V3 = I_MESGTAB-MSGV3
V4 = I_MESGTAB-MSGV4
IMPORTING
MSG = MESG1.
IF I_MESGTAB-MSGTYP = 'S' .
WA_SUCCMESG-MESG = MESG1.
APPEND WA_SUCCMESG TO I_SUCCMESG.
else IF I_MESGTAB-MSGTYP = 'E' .
WA_ERRMESG-MESG = MESG1.
APPEND WA_ERRMESG TO I_ERRMESG.
ENDIF.
ENDLOOP.
Hope this is clear.
Thanks and Regards. -
Passing select-options values using call transaction method
Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
bukrs TYPE bukrs,
werks TYPE werks_d,
matkl TYPE matkl,
END OF t_tab.
DATA: w_tab TYPE t_tab,
i_tab TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
KrishanHi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna. -
Supress message in status bar when using Call Transaction
Hi,
I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
Please let me know for more information.
Thanks,
Manoj.>
kaka79 wrote:
> I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
> But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
> I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table). -
Can we hav call transaction and session method for an application
can we hav call transaction and session method for an application ?if yes how?
Hi ,
You can. If Call Transaction fails, a batch input session can be created.
Check this example-
Call the transaction. Messages from Call Transaction are stored in the
internal table messtab
CALL TRANSACTION 'LT01' USING bdc_tab MODE 'N' UPDATE 'S'
MESSAGES INTO messtab.
IF sy-subrc = 0.
Call transaction successfull, get the number of the Transfer Order that
was created
LOOP AT messtab.
IF messtab-dynumb = '0104' AND messtab-msgnr = '016'.
w_transportorderno = messtab-msgv1.
ENDIF.
ENDLOOP.
ELSE.
Call transaction failed, create a batch input session instead.
PERFORM open_group.
PERFORM bdc_insert USING 'LT01'.
PERFORM close_group.
ENDIF.
Regards,
Sookshma -
Open Transaction MM01/MM02 with multiple views using CALL TRANSACTION
Hi All,
I want to open MM01/MM02 with multiple views using call transaction but in the parameter ID for Views (MMX) I can pass status of only one View.
SET PARAMETER ID 'MAT' FIELD v_mat.
SET PARAMETER ID 'VKO' FIELD ' '.
SET PARAMETER ID 'MTA' FIELD IT_MOFF-MTART.
SET PARAMETER ID 'MTP' FIELD IT_MOFF-MBRSH.
SET PARAMETER ID 'VTW' FIELD ' '.
SET PARAMETER ID 'BWT' FIELD ' '.
SET PARAMETER ID 'LGT' FIELD ' '.
SET PARAMETER ID 'MXX' FIELD 'K'. "Sales View
SET PARAMETER ID 'MM5' FIELD ' '.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN
Please suggest.
Regards,
DivyaI do not exactly understand what you mean, but what i already did:
- I checked that the fields are from the same type.
- KUNNR is initialized! I already had a look to the debugger, that's why i'm posting this in this forum.
any more comments on this ?
maybe i have to change anything in the z-transaction. Btw, this is what the parameter looks like in the transaction:
SELECTION-SCREEN BEGIN OF BLOCK Debitoren WITH FRAME TITLE text-001.
PARAMETERS pkunnr type kna1-kunnr OBLIGATORY.
SELECTION-SCREEN END OF BLOCK Debitoren.
Edited by: Sven Delangle on Sep 3, 2010 2:42 PM -
Please tell me the cases when I will use Call transaction/ Batch Session.
Can you please tell me when I will use Call transaction or Batch Session in the time of uploading data through BDC.
Regards,
SubhasishHi subhasish,
1. One of the main criteria is
2. If error handling facility is required, then batch session is the best,
otherwise if we use call transaction, then error handling code,
has to be written in the program itself.
3. Batch session provides lot of facilities to the user.
regards,
amit m. -
Updating custom table using call transaction
How to update a custom table using Call Transaction method. How can we use Table control (Module Pool) for this purpose).
Vignesh,
Create a table maintenance transaction for ur custom tables. Check this link for ref...
http://allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
And create a BDC recording and code a program accordingly...
regards,
karthik -
How to create a session using call transaction method.
hi , this is nagaraju,
How to create a session using call transaction method.Hi,
About Data Transfer In R/3 System
When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.
In the process of replacing current applications and transferring application data, two situations might occur:
The first is when application data to be replaced is transferred at once, and only once.
The second situation is to transfer data periodically from external systems to SAP and vice versa.
There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.
The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called batch input or batch data communication.
1. SESSION METHOD
2. CALL TRANSACTION
3. DIRECT INPUT
First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. Unless session is processed, the data is not transferred to database table.
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program.
SESSION METHOD
Data is not updated in database table unless Session is processed.
No sy-subrc is returned.
Error log is created for error records.
Updation in database table is always synchronous
CALL TRANSACTION
Immediate updation in database table.
Sy-subrc is returned.
Errors need to be handled explicitly
Updation in database table can be synchronous Or Asynchronous.
Regards,
Sruthi.
Maybe you are looking for
-
After my last update with Firefox, my right-hand scroll bar no longer has up and down arrows. I really need to get them back. I'm using a Mac laptop.
-
How to get email as ABAP report through SAP.
hi all, here i am getting one error. i run the program in foreground i am getting mail. but when i run the report in back ground i get mail but contents no data?? whot could be the reason??
-
Implementing own Policy - Problems occur.
I am implementing my own Policy class (via the -Xbootclasspath and java.security file). (Using jdk 1.4) I have two problems: 1. My Policy class is not instantiated unless I call Policy.getPolicy() a. I have run the app as such: java -Djava.security.m
-
My Mac Mini 1g melted inside and looks like this now: http://www.rebolt.no/skrot/mini1.jpg http://www.rebolt.no/skrot/mini2.jpg http://www.rebolt.no/skrot/mini3.jpg http://www.rebolt.no/skrot/mini4.jpg http://www.rebolt.no/skrot/mini5.jpg Will Apple
-
SCEP Anyconnect version 3 MS CA
Hi All Im using anyconnect and SCEP proxy on the ASA, trying to get identity certs from a windows CA. I want the certs to have a common name of the user id of the person requesting, basically to take the username as the common name. Is there a way to