Can I use Canon DPP as the external editor in Aperture 3 so I can use the lens distortion correction?

I'd like to use Aperture as my standard RAW converter and export to DPP if necessary. Has anyone tried it?

No, I don't believe so. DPP is a RAW converter, like Aperture, and you usually can't mix and match those.

Similar Messages

Using Photoshop elements 6 as external editor in aperture

I am new to aperture2, have imported photos into the aperture library, from a folder on the harddrive. I have set photoshop elements as the external editor. When i select a photo for external editing i get redirected to elements, do the editing, but when i close and save the edited picture and go back to aperture, i have two of the same pictures in aperture one with two circles in the bottom left corner, one with a square with arrows in, but not the edited version. Checking in finder, the edited picture is in the folder where I imported the photos from. Am a missing a basic setting?

That sounds very strange. You should have the referenced icon in the lower right corner on the edited version as well.
Just thinking; are you using Aperture 1.x by any chance? In the previous version of Aperture the edited image was stored inside the library file, and in version 2.x the edited image is stored together with the original referenced master.
You could try to rebuild your library by holding down the "CMD + OPT"- keys when starting Aperture. Choose from the dialog.
Regards
Paul K

Using photoshop elements 12 as external editor in Aperture 3.5.1

I have been using photoshop elements 12 as external editor to resize some photos and add some refinements not available in aperture....
It look like the file I send to PE becomes HUGE but is not marked as a separate version.....there is a little mark in lower right corner..
Is this correct?normal?
It is a problem, because I am also trying to use focus stacking software and it won't stack files with huge size differences...
thanks
sailmom

oh wow!
I started with a .orf (olympus omd em1) RAW file 13.73 MB...
I just right clicked to edit in photoshop elements...
so the one beside it...is 40.51.....it does not say new version but it has the "dot" on lower right.....
so I don't understand all the intricacies of this...but I am guessing sending a file out of Aperture gets a huge file in return.....
thanks!
sailmom

External editor in Aperture: How do I see the edited image in Aperture?

I used to be able to edit externally in Elements and then save/close the program and see the changes in Aperture. This does not happen anymore. I have to save the changed image (onto my desktop), and then import it into Aperture. Any suggestions how to save the file edited externally directly in Aperture? OS10.8.5, Aperture 3.4.5

I just switched that to .psd and the edited file appeared in Aperture as before.
That should not be necessary. Both tiff and psd should work. Does your external editor change the .tiff extension to .tif when saving back? Then Aperture will not recognize the file. The external editor needs to be set to save over the existing file with exactly the same filename, inclusing extension.

Using (Parallels) PS as an external editor for Aperture

I am new to the Mac so perhaps this has already been addressed. If so, I apologize.
I am using Aperture for my photo editing and have been using PhotoShop CS5, through Parallels, as an external editor. Much to my surprise this works reasonably well most of the time although sometimes I run into a very puzzling situation.
Typically I use CS5 to take care of lens distortion since Aperture does not have that functionality built-in. I adjust an image and, if it needs perspective adjustment, I call CS5, through Parallels, convert the object into a Smart Object, Transform the object using the Distort functionality, flatten the image and save it to return to Aperture. Most of the time this works just fine. However sometimes I end up with an image that Aperture tells me it cannot open and, when I try to open it with PS again, it also fails. Sometimes the newly adjusted image just never shows up in Aperture and it is as though it dispappered into the ether.
I have tried Save and I have tried Save As using the same location specified by PS. Save normally works but sometimes fails as described above and Save As always seems to fail. Can anyone tell me what is going on here?
One more note. When the attempt to adjust the photo in CS5 fails I have tried again and again and it always seems to fail for those images. I have no idea why this should be but repeated attempts fail. I have success about 60% of the time and the rest of the time either I get an image that cannot be opened or an image that just disappers. I am using CS5 under Parallels because Adobe will not give me a license for the Mac version unless I upgrade and I would rather not pay the $200 and I don't want to end up in CC.
There are really two issues here. First, why is CS5 occasionally failing and, second, is there a good replacement for CS5 that will work with Aperture to do Perspective Adjustments. I have the trial of PTLens but CS5 is much more flexible in how it allows me to distort an image since not all my image distortions from UWA lenses are symetrical and PTLens only handles symetrical distortion.
Thanks for any help anyone can provide.

Agreeing with 99jon, and adding that in my opinion, the only logical use of the two programs is to use the Lightroom Library Module (not the PSE Organizer) as the tool for organizing your photos, and the Lightroom Develop module as your primary editor, and the PHotoshop Elements Editor as the supplemental editor for the situation where you need more power editing than Lightroom provides.
Why? Because Lightroom is designed so that it can relatively seemlessly send photos to PSE for extra editing and receive the edited photo back from PSE.
There is no relatively seemless way to have the PSE Organizer send photos to Lightroom and receive the edited photo in return. You will do a lot of extra work to make this work. I am also very skeptical about this statement, I don't think it opens your photos in the Lightroom Develop Module, but I admit I haven't tried it: "I figured out how to configure Elements to call Lightroom to edit a picture directly. (Edit-> Preferences->Editing) WIth that setting, I can now use lightroom on my photos."

How to I set up PSE12 to be the external editor for Aperture - aperture is exporting the photos but they are not showing up in PSE

I want to use PSE12 as external editor for apetture . the photos are exportd but do not show up in PSE. Must be some adjustment I can't find?

The article below is for PSE 10, but should be relevant for PSE 12. I recently used the instructions for editing Aperture photos in PSE 11
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/

How to remove an external editor in Aperture 3

I've searched but can't find how to remove an external editor in Aperture 3. The external editing software I was using as a trial simply didn't make the cut.

Are you sure you're talking about an external editor and not a plug-in?
When you remove the application you're using as the external editor it should no longer show up in the *Photos->Edit with* menu. There is no way, short of editing the Aperture plist file, of having it not show up in the *Preferences->External Photo Editor:* field.

Trouble with PSE12 as External Editor in Aperture 3.3

I previously used Photoshop Elements 6 (PSE6) as my external editor in Aperture 3.3 with no problem. After having installed PSE12 and set it as the external editor in Aperture, something is amiss. When I choose a photo for external editing in PAS12, PSE12 launches but the photo never opens in PSE12. Has anyone else experienced this? Am I missing something? Should I just stick with PSE6? Thanks.....

Have you selected the PSE application or the PSE folder in the settings for the external editor? When you are setting the external editor, make sure you dive into the PS Elements Support folder, where the application is hidden.
See Barbara Brundage's article:
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

I just installed Photoshop and want to use it as the external editor. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!

I just installed Photoshop and want to use it as the external editor in iPhoto. I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE. Any help in changing the external editor to PS would be appreciated!

Welcome. I am using Photoshop CS5 and this works fine for me. Possibly Adobe has changed this in CS6. Hopefully, LarryHN will have further suggestions. Best.

HT201250 I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?

I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?

I guess if stolen or lost it would protect my "stuff", and if I'm travelling would protect my privacy.
You must understand the purpose and implications of encryption before deciding whether to use it.
Encryption locks your data with a password. If you forget that password, the data is lost beyond any chance of recovery. Neither Apple nor anyone else will be able to help you recover that data if you don't know the password.
By the same token, the password must be strong enough to provide the security you want. For example, if you're the potential target of industrial espionage by a government or large corporation, you need the strongest possible password. To create and manage such a password safely is a task in itself, not to be undertaken lightly.
If you're only concerned about casual snooping by someone with no special skill, a weak, easily-remembered password is appropriate.
But regardless of the strength of the password, if you lose it, the data is gone forever.
Another point to remember is that if you encrypt your data on one storage device, you must also encrypt it on all other storage devices that would be accessible to the same attacker. Otherwise the data isn't protected. For example, if you keep your computer and your backup drive in the same room, and the internal drive of the computer is not encrypted, then there's no point in encrypting the backup drive.

I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?

I just backed up my photos by copying my iPhoto Library onto an external drive. Now the Library on my MacBook won't open. I can only open the photos if the external is plugged in. How can I resolve this issue?

Exactly what did you do?
The correct steps are
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
My guess is that that you have not switched iphoto to use the external drive yet - opttion launch and select libary
LN

How can I change the external editor in iphoto?

When I go to Preferences, the only option that pops up in General Edit is Graphic Converter (formerly used). How can I change the external editor to Photoshop Elements 6? Also, can I drag and drop a photo from iPhoto onto the Photoshop elements 6 icon in the dock and do some editing and saving without corrupting my iPhoto library?

I do not remember how (if) iPhoto 6 handles PSE6 as an external editor - in iPhoto '08 you can set any program as one - try going to the preference that has graphic converter in it and selecting it - you probably will get a select dialogue that will let you choose a new external editor
It is not recommend that you ever save any files directly into the iPhoto library - if you can not get PSE6 set as the external editor then you should export your photos, edit them and save and then import the new photo into iPhoto
But I believe you will be able to set PSE6
LN

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

Lightroom is using Photoshop CC(2014) as the external editor. How do I get it to point to Photshop CC instead? Since I'm a CC subscriber, both versions are installed on my computer.

Lightroom is using Photoshop CC(2014) as the external editor. How do I get it to point to Photshop CC instead? Since I'm a CC subscriber, both versions are installed on my computer.

JimHess wrote:
I just don't see why you would want both Photoshop CC and Photoshop CC 2014 installed.
Jim, when PS CC 2014 became available, it was installed by the CC App alongside the existing PS CC app, rather than replacing it. For new subscribers who joined after PS CC 2014 was released, that's the only version that was installed (though the option to install PS CC is available via the Previous Version function of the CC App). Thus on my Windows system I have both versions installed automatically (because I started to subscribe before CC 2014 was released), whereas on my newer MBP only PS CC 2014 was installed because I installed it after CC 2014 was released.

Can I use Canon DPP as the external editor in Aperture 3 so I can use the lens distortion correction?

Similar Messages

Maybe you are looking for