Can I use CanoScan 4400F with Photoshop CS 2014 Mac OS X

Hi,
I'm stil using Photoshop CS3, but I would like to update to Photoshop CS 2014. I installed the trial version, but I don´t find a way how I could use my scanner (Canon CanoScan 4400F). Works fine with CS3.
Any ideas?
Kind regards
Hansjörg

Firefox 4 versions and later do not run on a PowerPC Mac.
Firefox 4 and later require '''at least OS X 10.5''' and an Intel Mac.
http://www.mozilla.org/en-US/firefox/8.0/system-requirements/
you must install:
supported Firefox 3.6.24 (Mac OS X 10.4 and later) and can be found here:
http://www.mozilla.com/en-US/firefox/all-older.html
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Similar Messages

  • HT3486 can I use my ipad with back to my mac?

    can I use my ipad with back to my mac?

    No, because you have to use AFP file protocol and it is difficult to get going, although one file app does offer it, I have not seen or heard anyone that managed it. You should look in the ipad area.. as this really has little to do with Time Capsule.

  • When I try to open my Address Book from Finder, it says :You can't use this version with this version of Mac OS x. I have Address Book 5.0.3 and Mac OS X 10.7.5 What should I do to get my Address Book back???

    When I try to open my Address Book from Finder, it says :You can't use this version with this version of Mac OS x. I have Address Book 5.0.3 and Mac OS X 10.7.5 What should I do to get my Address Book back???

    Unless you deleted Address Book 6, or restored from a backup made before you upgraded to Lion, Address Book 6 should be on your disk somewhere.  Try to find it with spotlight or by browsing likely folders with Finder.  Also check Trash. If you find other Address Books, using Quick View or Get Info in Finder should show the version number.
    Have you ever moved Address Book out of the Applications folder, either before or after you upgraded to Lion?
    If you can't figure out how this happened in the first place, I would be worried that other OS X utilities are similarly affected.

  • Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

    Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

    I can't help you with a direct answer.  For third-party devices you should contact the vendor (Vodafone). 
    If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service.

  • Got error id 502 with photoshop cc 2014 mac V.15.2.2 (15.2.2.310)?? latest version install, please urgent.

    got error id 502 with photoshop cc 2014 mac V.15.2.2 (15.2.2.310)?? latest version install, please urgent.??????
    Process:         Adobe Photoshop CC 2014 [851]
    Path:            /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/MacOS/Adobe Photoshop CC 2014
    Identifier:      com.adobe.Photoshop
    Version:         15.2.2 (15.2.2.310)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [146]
    Responsible:     Adobe Photoshop CC 2014 [851]
    User ID:         502
    Date/Time:       2015-02-06 10:27:25.031 +0400
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  817D6DB9-94A0-9F64-CA93-F771A1C7B832
    Crashed Thread:  0 Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x00000000000001a0
    VM Regions Near 0x1a0:
    -->
    __TEXT                 0000000104662000-0000000108f3f000 [ 72.9M] r-x/rwx SM=COW  /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/MacOS/Adobe Photoshop CC 2014

    got error id 502 with photoshop cc 2014 mac V.15.2.2 (15.2.2.310)?? latest version install, please urgent.??????
    Process:         Adobe Photoshop CC 2014 [851]
    Path:            /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/MacOS/Adobe Photoshop CC 2014
    Identifier:      com.adobe.Photoshop
    Version:         15.2.2 (15.2.2.310)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [146]
    Responsible:     Adobe Photoshop CC 2014 [851]
    User ID:         502
    Date/Time:       2015-02-06 10:27:25.031 +0400
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  817D6DB9-94A0-9F64-CA93-F771A1C7B832
    Crashed Thread:  0 Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x00000000000001a0
    VM Regions Near 0x1a0:
    -->
    __TEXT                 0000000104662000-0000000108f3f000 [ 72.9M] r-x/rwx SM=COW  /Applications/Adobe Photoshop CC 2014/Adobe Photoshop CC 2014.app/Contents/MacOS/Adobe Photoshop CC 2014

  • I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

    I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

    There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
    Problem:
    You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
    You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
    You get a couple of error messages, which you click through.
    You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
    Solution:
    BEFORE you restart, and with the installer package still open -
    1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
    Applications : Canon Utilities
    Applications : Canoscan Toolbox
    and remove the prefix Into_ from each folder
    2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
    Library : CFMSupport
    and if it didn't, move it there yourself
    THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

  • Can I use Lightroom 3 with Photoshop CS3 ?

    Being unfamiliar with Lightroom, I would like to know, before I buy it, if I can use v3 and higher with my Design Standard Edition, which includes
    Photoshop CS3.
    And if so, can I download the newest RawUpdate (6.2) for use with Lightroom 3.x or is this of no use ? Or is the use of the newest Rwa update only possible in combination with CS5 ?
    Would be glad if anyone could help, because I dont't find a suitable answer in "system requirements" ...

    You can use Ps CS3 with Lightroom, but ACR 6.1 is only compatible with CS5. That being said, everything that ACR 6.1 has is already built into Lr3.2. Adobe also update ACR and LR at the same time, so new camera model support shouldn't be a problem.

  • How can I use puzzle effect with Photoshop CC?

    I couldn't figure out how to use the puzzle effect with Photoshop CC... Can someone please help me million thanks

    Photoshop Puzzle Effect

  • Why can't I associate jpegs with Photoshop CC 2014?

    I just loaded the 2014 version of Photoshop CC 2014 and I removed the old version first.  My file associations seem to be ok except for with jpegs.  When I try to set a custom association Photoshop isn't available and so I browse and choose the exe file and it still won't show up as an option.  I'm on Win 7 64.  Does anyone know how to fix this.  FYI, I have already uninstalled and reinstalled and that didn't work.

    So it looks like Manage Extensions has been moved under InDesign on the menu bar. I launched it and it installed the Extension Manager.
    I rebuilt my InDesign preferences and got what must've been a suppressed Startup Alert
    Anyone happen to know how I can reinstall these plugins?

  • Using plug ins with Photoshop CC 2014

    I have downloaded and installed Photoshop CC 2014 but none of my third party plug ins were automatically loaded.
    I copied and pasted the relevant plug ins from previous version Plug in folder and some of them have appeared in my filters in CC 2014 but they do not work
    In earlier versions all my filters opened in a separate layer but now they do not work at all even though the Nik filters do open but the effect does not apply.
    My perfect Suite and capture One plug ins do not work at all either

    I have downloaded and installed Photoshop CC 2014 but none of my third party plug ins were automatically loaded.
    I copied and pasted the relevant plug ins from previous version Plug in folder and some of them have appeared in my filters in CC 2014 but they do not work
    In earlier versions all my filters opened in a separate layer but now they do not work at all even though the Nik filters do open but the effect does not apply.
    My perfect Suite and capture One plug ins do not work at all either

  • Can I use Fireworks CS4 with Photoshop Extended CS3?

    I plan to upgrade to the Master Collection later this year, if business keeps going as well as it has, but I need a feature of FW now, namely the more-excellent PNG-8 saving capabilities of FW, based on what I've read on the web. Will I need to backsave my FW4 files to make them work in CS3? I'm on an Intel Mac Pro, running Leopard.

    Gosh, all I want to know is if FW CS4 files work well in DW CS3. On another forum, the answer is yes.
    I do all my coding by hand, and will be taking a FW class on IWA for a particular certification. I don't want to make a Flash movie (.swf) right now. Yes, I know I could create a single-framed .swf and export it as a PNG, but that's an awful lot of work, and I hear FW does it much faster. I just want to make a certain kind of PNG that works correctly in IE6 that apparently can only be made with FW. IE6 is the only browser where the PNG with alpha transparency does not work correctly, and the background ends up gray instead of transparent. From what I've read, I can make an PNG-8 in FW with alpha transparency that will work correctly in IE6. Hopefully.
    I'm trying to reproduce an image (not the exact image, but using the same principles) from a CSS Zen Garden site treatment, and I need the bottom, detailed image to be opaque and the area over the image to be transparent, not gray, since text will be scrolling under it. The bottom art will be fixed to the bottom and positioned absolutely and will have a ragged upper edge with a transparent backgropund. I know it can be done, because I've seen it, and I've seen the CSS code. My question has to do with actually creating the PNG, which I know will work in all the other browsers on both platforms. I need to make something IE6-friendly.
    Thank you, though for trying to help.

  • Camera Raw and DNG Converter using CS 5 with Photoshop on a Mac

    The DNG Converter was installed but still did not allow me to open the files in Photoshop.  What can I do to address this problem?

    here's info on how to use dng converter, https://www.youtube.com/watch?v=0bqGovpuihw

  • Can I use two iPods with one account on mac

    I have one itunes account and two Ipods can I update both i use mac, have a iphone

    Yes.

  • Hi, using a macbook with photoshop and saving to mem stick,

    Can i use a macbook with photoshop save to a mem stick then use the same files on a windows pc wih photoshop?

    Yes, of course.
    Why would you expect a difference or problem between platforms?

  • Can I use Adobe Premiere and Photoshop (with cloud license) on more thn one computer.

    Can I use Adobe Premiere and Photoshop (with cloud license) on more than one computer? WHen on the oroad I would like to use it n my laptop, while I installed on the desktop.

    Hi Kasiah,
    As per the EULA accepted while you launch Adobe applications you can download & install on 2 systems but can use on one at the same time.
    Source:http://www.adobe.com/in/products/creativecloud/faq.html
    Let me know if you have any questions on this.
    Cheers~!
    -Mandhir

Maybe you are looking for